Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period. Fangda Special Steel Technology Co's Dividend Payout Ratio for the
months ended in Jun. 2026 was 3.28.
The historical rank and industry rank for Fangda Special Steel Technology Co's Dividend Payout Ratio or its related term are showing as below:
SHSE:600507'
s Dividend Payout Ratio Range Over the Past 10 Years
Min: 0.05 Med: 0.84 Max: 3.27
Current: 0.59
During the past 13 years, the highest Dividend Payout Ratio of Fangda Special Steel Technology Co was 3.27. The lowest was 0.05. And the median was 0.84.
SHSE:600507's Dividend Payout Ratio is ranked worse than 76.23% of 265
companies
in the Steel industry
Industry Median: 0.35
vs SHSE:600507: 0.59
During the past 13 years, the highest Trailing Annual Dividend Yield of Fangda Special Steel Technology Co was 24.50%. The lowest was 0.29%. And the median was 11.32%.
During the past 12 months, Fangda Special Steel Technology Co's average Dividends Per Share Growth Rate was 506.10% per year.
During the past 3 years, the average Dividends Per Share Growth Rate was -69.00% per year.
During the past 13 years, the highest 3-Year average Dividends Per Share Growth Rate of Fangda Special Steel Technology Co was 314.70% per year. The lowest was -71.20% per year. And the median was -0.05% per year.
The growth rate is calculated with least square regression.
For more information regarding to dividend, please check our Dividend Page.
* Please note that "special dividend" is not included in the calculation of dividend per share and related fields.
Fangda Special Steel Technology Co (SHSE:600507) Dividend Payout Ratio Explanation
In dividends investing, Dividend Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
Fangda Special Steel Technology Co Dividend Payout Ratio Related Terms
Fangda Special Steel Technology Co Dividend Payout Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Fangda Special Steel Technology Co Dividend Payout Ratio Chart
SHSE:600507 vs NUE, STLD, RS: Dividend Payout Ratio Comparison
For the Steel subindustry, Fangda Special Steel Technology Co's Dividend Payout Ratio, along with its competitors' market caps and Dividend Payout Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Fangda Special Steel Technology Co Dividend Payout Ratio vs Steel Industry
For the Steel industry and Basic Materials sector, Fangda Special Steel Technology Co's Dividend Payout Ratio distribution charts can be found below:
* The bar in red indicates where Fangda Special Steel Technology Co's Dividend Payout Ratio falls into.
Fangda Special Steel Technology Co Dividend Payout Ratio Calculation
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Fangda Special Steel Technology Co (SHSE:600507) has a Dividend Payout Ratio of 3.28 as of Jun. 2026. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Fangda Special Steel Technology Co and its competitors. This is 290% above median its historical median of 0.84. Over the past decade, Fangda Special Steel Technology Co's Dividend Payout Ratio has ranged from 0.05 to 3.27. According to the industry distribution chart, Fangda Special Steel Technology Co ranks #202 out of 265 companies in the Steel industry, placing it in the top 76.2%.
Is Fangda Special Steel Technology Co's Dividend Payout Ratio too high?
Fangda Special Steel Technology Co's current Dividend Payout Ratio of 3.28 is 290% above median its 10-year median of 0.84. Over the past 10 years, this metric has ranged from a low of 0.05 to a high of 3.27. The Steel industry median Dividend Payout Ratio is 0.35. Fangda Special Steel Technology Co's value of 3.28 is 837.1% above this industry median. Based on the distribution chart, Fangda Special Steel Technology Co ranks #202 out of 265 companies in the Steel industry, which is in the bottom quartile relative to peers. Overall, Fangda Special Steel Technology Co has a GF Score™ of 61/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Fangda Special Steel Technology Co's Dividend Payout Ratio compare to NUE and STLD?
According to the Steel industry distribution chart, Fangda Special Steel Technology Co ranks #202 out of 265 companies for Dividend Payout Ratio. This places Fangda Special Steel Technology Co in the lower half of its industry. The industry median Dividend Payout Ratio is 0.35. Fangda Special Steel Technology Co's value of 3.28 is 837.1% above this benchmark. Historically, Fangda Special Steel Technology Co's own Dividend Payout Ratio has ranged from 0.05 to 3.27 over the past decade. While the company's 10-year median is 0.84 vs. the industry median of 0.35, Fangda Special Steel Technology Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Dividend Payout Ratio for a Steel company?
The median Dividend Payout Ratio among Steel companies is 0.35, based on 265 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Payout Ratio significantly above this median, while those in the bottom quartile fall well below. However, Dividend Payout Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Fangda Special Steel Technology Co's current Dividend Payout Ratio of 3.28 is 837.1% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Dividend Payout Ratio mean?
A high Dividend Payout Ratio can signal that a stock is expensive relative to its fundamentals. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Fangda Special Steel Technology Co and its competitors. For the Steel industry, the median Dividend Payout Ratio is 0.35 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Fangda Special Steel Technology Co's current Dividend Payout Ratio is 3.28, which is 290% above median its own 10-year median of 0.84. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Fangda Special Steel Technology Co stock overvalued right now?
Based on GuruFocus' analysis, Fangda Special Steel Technology Co (SHSE:600507) is currently considered Fairly Valued. The stock's GF Value™ is ¥4.13, compared to a current price of ¥4.24 — trading 2.7% above its estimated fair value. The current Dividend Payout Ratio is 3.28, which is 290% above median its 10-year median of 0.84 and 837.1% above the Steel industry median of 0.35. Fangda Special Steel Technology Co's overall GF Score™ is 61/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Dividend Payout Ratio calculated?
Dividend Payout Ratio is calculated from a company's financial statements. For Fangda Special Steel Technology Co (SHSE:600507), the current Dividend Payout Ratio is 3.28 as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Fangda Special Steel Technology Co (SHSE:600507) Overvalued in 2026?
Based on GuruFocus' analysis, Fangda Special Steel Technology Co stock appears to be overvalued.
The current stock price of ¥4.24 is trading 2.7% above its estimated GF Value™ of ¥4.13.
GuruFocus considers Fangda Special Steel Technology Co to be Fairly Valued.
Key valuation signals for SHSE:600507:
Dividend Payout Ratio: 3.28 (290% above median its 10-year median of 0.84)
GF Value™: ¥4.13 vs. price of ¥4.24 (2.7% above fair value)
Industry Position: 837.1% above the Steel median (#202 of 265)
No single metric tells the full story. See the SHSE:600507 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Fangda Special Steel Technology Co Ltd is mainly engaged in the production and distribution of iron and steel products. It is also involved in processing coke crafts, sintering, smelting iron, steel-making, and steel rolling. The company's products include the automotive leaf springs, deformed steel bars, spring flat steels, round springs, shock absorbers, spring special equipment, auto parts, and molds.
61GF Score
Get the complete analysis for SHSE:600507
Dividend Payout Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
SHSE:600507 has been successfully added to your 
