The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period. Taiwan Styrene Monomer's Dividend Payout Ratio for the
months ended in Dec. 2025 was 0.00.
The historical rank and industry rank for Taiwan Styrene Monomer's Dividend Payout Ratio or its related term are showing as below:
During the past 13 years, the highest Dividend Payout Ratio of Taiwan Styrene Monomer was 2.50. The lowest was 0.38. And the median was 1.15.
TPE:1310's Dividend Payout Ratio is not ranked *
in the Chemicals industry.
Industry Median: 0.36 * Ranked among companies with meaningful Dividend Payout Ratio only.
During the past 13 years, the highest Trailing Annual Dividend Yield of Taiwan Styrene Monomer was 16.67%. The lowest was 0.00%. And the median was 5.01%.
During the past 13 years, the highest 3-Year average Dividends Per Share Growth Rate of Taiwan Styrene Monomer was 63.90% per year. The lowest was -57.80% per year. And the median was -23.10% per year.
The growth rate is calculated with least square regression.
For more information regarding to dividend, please check our Dividend Page.
* Please note that "special dividend" is not included in the calculation of dividend per share and related fields.
Taiwan Styrene Monomer (TPE:1310) Dividend Payout Ratio Explanation
In dividends investing, Dividend Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
Taiwan Styrene Monomer Dividend Payout Ratio Related Terms
Taiwan Styrene Monomer Dividend Payout Ratio Historical Data
* Premium members only.
The historical data trend for Taiwan Styrene Monomer's Dividend Payout Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Taiwan Styrene Monomer Dividend Payout Ratio Chart
For the Chemicals subindustry, Taiwan Styrene Monomer's Dividend Payout Ratio, along with its competitors' market caps and Dividend Payout Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Taiwan Styrene Monomer Dividend Payout Ratio vs Chemicals Industry
For the Chemicals industry and Basic Materials sector, Taiwan Styrene Monomer's Dividend Payout Ratio distribution charts can be found below:
* The bar in red indicates where Taiwan Styrene Monomer's Dividend Payout Ratio falls into.
Taiwan Styrene Monomer Dividend Payout Ratio Calculation
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period.
Taiwan Styrene Monomer's Dividend Payout Ratio for the fiscal year that ended in Dec. 2025 is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Taiwan Styrene Monomer (TPE:1310) has a Dividend Payout Ratio of 0.00 as of Dec. 2025. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Taiwan Styrene Monomer and its competitors. Over the past decade, Taiwan Styrene Monomer's Dividend Payout Ratio has ranged from 0.38 to 2.50. According to the industry distribution chart, Taiwan Styrene Monomer ranks #999999 out of 907 companies in the Chemicals industry.
Is Taiwan Styrene Monomer's Dividend Payout Ratio too high?
Taiwan Styrene Monomer's current Dividend Payout Ratio is 0.00. Over the past 10 years, this metric has ranged from a low of 0.38 to a high of 2.50. Based on the distribution chart, Taiwan Styrene Monomer ranks #999999 out of 907 companies in the Chemicals industry, which is in the bottom quartile relative to peers. Overall, Taiwan Styrene Monomer has a GF Score™ of 65/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Taiwan Styrene Monomer's Dividend Payout Ratio compare to DOW?
According to the Chemicals industry distribution chart, Taiwan Styrene Monomer ranks #999999 out of 907 companies for Dividend Payout Ratio. This places Taiwan Styrene Monomer in the lower half of its industry. The industry median Dividend Payout Ratio is 0.36. Historically, Taiwan Styrene Monomer's own Dividend Payout Ratio has ranged from 0.38 to 2.50 over the past decade. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Dividend Payout Ratio for a Chemicals company?
The median Dividend Payout Ratio among Chemicals companies is 0.36, based on 907 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Payout Ratio significantly above this median, while those in the bottom quartile fall well below. However, Dividend Payout Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Dividend Payout Ratio mean?
A high Dividend Payout Ratio can signal that a stock is expensive relative to its fundamentals. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Taiwan Styrene Monomer and its competitors. For the Chemicals industry, the median Dividend Payout Ratio is 0.36 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Taiwan Styrene Monomer's current Dividend Payout Ratio is 0.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Taiwan Styrene Monomer stock overvalued right now?
Based on GuruFocus' analysis, Taiwan Styrene Monomer (TPE:1310) is currently considered Fairly Valued. The stock's GF Value™ is NT$9.57, compared to a current price of NT$10.35 — trading 8.2% above its estimated fair value. The current Dividend Payout Ratio is 0.00. Taiwan Styrene Monomer's overall GF Score™ is 65/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Dividend Payout Ratio calculated?
Dividend Payout Ratio is calculated from a company's financial statements. For Taiwan Styrene Monomer (TPE:1310), the current Dividend Payout Ratio is 0.00 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Taiwan Styrene Monomer (TPE:1310) Overvalued in 2026?
Based on GuruFocus' analysis, Taiwan Styrene Monomer stock appears to be overvalued.
The current stock price of NT$10.35 is trading 8.2% above its estimated GF Value™ of NT$9.57.
GuruFocus considers Taiwan Styrene Monomer to be Fairly Valued.
Key valuation signals for TPE:1310:
Dividend Payout Ratio: 0.00
GF Value™: NT$9.57 vs. price of NT$10.35 (8.2% above fair value)
No single metric tells the full story. See the TPE:1310 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Taiwan Styrene Monomer Corp manufactures and sells styrene monomer. The company's products include Styrene Monomer, Para-diethyl benzene, Toluene, and Ethyl benzene. Its main clients are the manufacturers of Polystyrene, ABS resins, and Synthetic rubber, of which the products are widely applied in industries of: electric appliances, machines, electronics, automobiles, and packaging etc. Its segments consist of the Plasticization segment, which engages in manufacturing and domestic/international sales of styrene monomer, chemical and plastic materials; the Investment segment, which engages in investment business; and the Other segment. The majority of the revenue is derived from the Plasticization segment from Asia. Geographically, it operates in Asia, America, and Europe.
65GF Score
Get the complete analysis for TPE:1310
Dividend Payout Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:1310 has been successfully added to your 
