Mitsubishi Steel Mfg.CoTSE:5632 -0.82%57 Dividend Payout Ratio is 0.25 as of Mar. 2026, which is 46% below its 10-year median of 0.46. GuruFocus rates TSE:5632 with a GF Score™ of 57/100 and a GF Value™ of 円1,395.25 (Significantly Overvalued). The stock has 8 warning signs investors should review. Among 271 Steel companies, Mitsubishi Steel Mfg.Co ranks better than 55.72% on this metric.
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period. Mitsubishi Steel Mfg.Co's Dividend Payout Ratio for the
months ended in Mar. 2026 was 0.25.
The historical rank and industry rank for Mitsubishi Steel Mfg.Co's Dividend Payout Ratio or its related term are showing as below:
TSE:5632'
s Dividend Payout Ratio Range Over the Past 10 Years
Min: 0.35 Med: 0.46 Max: 3.29
Current: 0.35
During the past 13 years, the highest Dividend Payout Ratio of Mitsubishi Steel Mfg.Co was 3.29. The lowest was 0.35. And the median was 0.46.
TSE:5632's Dividend Payout Ratio is ranked better than 55.72% of 271
companies
in the Steel industry
Industry Median: 0.39
vs TSE:5632: 0.35
During the past 13 years, the highest Trailing Annual Dividend Yield of Mitsubishi Steel Mfg.Co was 7.00%. The lowest was 0.77%. And the median was 3.89%.
During the past 12 months, Mitsubishi Steel Mfg.Co's average Dividends Per Share Growth Rate was 26.60% per year.
During the past 3 years, the average Dividends Per Share Growth Rate was 17.40% per year.
During the past 13 years, the highest 3-Year average Dividends Per Share Growth Rate of Mitsubishi Steel Mfg.Co was 44.20% per year. The lowest was -37.00% per year. And the median was 5.15% per year.
The growth rate is calculated with least square regression.
For more information regarding to dividend, please check our Dividend Page.
* Please note that "special dividend" is not included in the calculation of dividend per share and related fields.
Mitsubishi Steel Mfg.Co (TSE:5632) Dividend Payout Ratio Explanation
In dividends investing, Dividend Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
Mitsubishi Steel Mfg.Co Dividend Payout Ratio Related Terms
Mitsubishi Steel Mfg.Co Dividend Payout Ratio Historical Data
* Premium members only.
The historical data trend for Mitsubishi Steel Mfg.Co's Dividend Payout Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Mitsubishi Steel Mfg.Co Dividend Payout Ratio Chart
TSE:5632 vs NUE, STLD, RS: Dividend Payout Ratio Comparison
For the Steel subindustry, Mitsubishi Steel Mfg.Co's Dividend Payout Ratio, along with its competitors' market caps and Dividend Payout Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Mitsubishi Steel Mfg.Co Dividend Payout Ratio vs Steel Industry
For the Steel industry and Basic Materials sector, Mitsubishi Steel Mfg.Co's Dividend Payout Ratio distribution charts can be found below:
* The bar in red indicates where Mitsubishi Steel Mfg.Co's Dividend Payout Ratio falls into.
Mitsubishi Steel Mfg.Co Dividend Payout Ratio Calculation
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period.
Mitsubishi Steel Mfg.Co's Dividend Payout Ratio for the fiscal year that ended in Mar. 2026 is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Mitsubishi Steel Mfg.Co (TSE:5632) has a Dividend Payout Ratio of 0.25 as of Mar. 2026. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Mitsubishi Steel Mfg.Co and its competitors. This is 46% below median its historical median of 0.46. Over the past decade, Mitsubishi Steel Mfg.Co's Dividend Payout Ratio has ranged from 0.35 to 3.29. According to the industry distribution chart, Mitsubishi Steel Mfg.Co ranks #120 out of 271 companies in the Steel industry, placing it in the top 44.3%.
Is Mitsubishi Steel Mfg.Co's Dividend Payout Ratio too high?
Mitsubishi Steel Mfg.Co's current Dividend Payout Ratio of 0.25 is 46% below median its 10-year median of 0.46. Over the past 10 years, this metric has ranged from a low of 0.35 to a high of 3.29. The Steel industry median Dividend Payout Ratio is 0.39. Mitsubishi Steel Mfg.Co's value of 0.25 is 35.9% below this industry median. Based on the distribution chart, Mitsubishi Steel Mfg.Co ranks #120 out of 271 companies in the Steel industry, which is above the industry midpoint. Overall, Mitsubishi Steel Mfg.Co has a GF Score™ of 57/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Mitsubishi Steel Mfg.Co's Dividend Payout Ratio compare to NUE and STLD?
According to the Steel industry distribution chart, Mitsubishi Steel Mfg.Co ranks #120 out of 271 companies for Dividend Payout Ratio. This puts Mitsubishi Steel Mfg.Co in the upper half of its industry. The industry median Dividend Payout Ratio is 0.39. Mitsubishi Steel Mfg.Co's value of 0.25 is 35.9% below this benchmark. Historically, Mitsubishi Steel Mfg.Co's own Dividend Payout Ratio has ranged from 0.35 to 3.29 over the past decade. While the company's 10-year median is 0.46 vs. the industry median of 0.39, Mitsubishi Steel Mfg.Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Dividend Payout Ratio for a Steel company?
The median Dividend Payout Ratio among Steel companies is 0.39, based on 271 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Payout Ratio significantly above this median, while those in the bottom quartile fall well below. However, Dividend Payout Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Mitsubishi Steel Mfg.Co's current Dividend Payout Ratio of 0.25 is 35.9% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Dividend Payout Ratio mean?
A high Dividend Payout Ratio can signal that a stock is expensive relative to its fundamentals. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Mitsubishi Steel Mfg.Co and its competitors. For the Steel industry, the median Dividend Payout Ratio is 0.39 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Mitsubishi Steel Mfg.Co's current Dividend Payout Ratio is 0.25, which is 46% below median its own 10-year median of 0.46. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Mitsubishi Steel Mfg.Co stock overvalued right now?
Based on GuruFocus' analysis, Mitsubishi Steel Mfg.Co (TSE:5632) is currently considered Significantly Overvalued. The stock's GF Value™ is 円1,395.25, compared to a current price of 円2,170.00 — trading 55.5% above its estimated fair value. The current Dividend Payout Ratio is 0.25, which is 46% below median its 10-year median of 0.46 and 35.9% below the Steel industry median of 0.39. Mitsubishi Steel Mfg.Co's overall GF Score™ is 57/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Dividend Payout Ratio calculated?
Dividend Payout Ratio is calculated from a company's financial statements. For Mitsubishi Steel Mfg.Co (TSE:5632), the current Dividend Payout Ratio is 0.25 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Mitsubishi Steel Mfg.Co (TSE:5632) Overvalued in 2026?
Based on GuruFocus' analysis, Mitsubishi Steel Mfg.Co stock appears to be overvalued.
The current stock price of 円2,170.00 is trading 55.5% above its estimated GF Value™ of 円1,395.25.
GuruFocus considers Mitsubishi Steel Mfg.Co to be Significantly Overvalued.
Key valuation signals for TSE:5632:
Dividend Payout Ratio: 0.25 (46% below median its 10-year median of 0.46)
GF Value™: 円1,395.25 vs. price of 円2,170.00 (55.5% above fair value)
Industry Position: 35.9% below the Steel median (#120 of 271)
No single metric tells the full story. See the TSE:5632 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Mitsubishi Steel Mfg.Co Ltd engages in the manufacture and sale of special steels, spring, casting and forging materials, and machinery. It offers its products in varied categories; special steel bars unit handles the manufacture and sale of steel bars that includes machine structural alloy steel, carbon steel for machine structural use, and bearing steel. Springs products include coil, leaf, and precision springs, press assembly, and shoe plate for rubber pad. Formed and fabricated products cover the manufacture and sale of steel and precision casting, precision machined component, alloy material, and special alloy and fine powder. Machinery business manufactures and sells press machine, general industrial and plant machinery, environmental equipment, and magnetic separator.
57GF Score
Get the complete analysis for TSE:5632
Dividend Payout Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:5632 has been successfully added to your 
