Tacmina (TSE:6322) Dividend Payout Ratio: 0.31 (As of Mar. 2026) — Near Median

Tacmina TSE:6322 +0.31% 81 Dividend Payout Ratio is 0.31 as of Mar. 2026, which is 3% below its 10-year median of 0.32. GuruFocus rates TSE:6322 with a GF Score™ of 81/100 and a GF Value™ of 円1,826.73 (Modestly Undervalued). Among 1,719 Industrial Products companies, Tacmina ranks better than 62.54% on this metric.

The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period. Tacmina's Dividend Payout Ratio for the months ended in Mar. 2026 was 0.31.

The historical rank and industry rank for Tacmina's Dividend Payout Ratio or its related term are showing as below:

TSE:6322' s Dividend Payout Ratio Range Over the Past 10 Years
Min: 0.3 Med: 0.32 Max: 0.48
Current: 0.3

During the past 13 years, the highest Dividend Payout Ratio of Tacmina was 0.48. The lowest was 0.30. And the median was 0.32.

TSE:6322's Dividend Payout Ratio is ranked better than
62.54% of 1719 companies
in the Industrial Products industry
Industry Median: 0.37 vs TSE:6322: 0.30

As of today (2026-07-08), the Dividend Yield % of Tacmina is 3.36%.

During the past 13 years, the highest Trailing Annual Dividend Yield of Tacmina was 4.28%. The lowest was 1.41%. And the median was 3.00%.

Tacmina's Dividends per Share for the months ended in Mar. 2026 was 円29.00.

During the past 12 months, Tacmina's average Dividends Per Share Growth Rate was 8.00% per year. During the past 3 years, the average Dividends Per Share Growth Rate was 2.60% per year. During the past 5 years, the average Dividends Per Share Growth Rate was 5.30% per year. During the past 10 years, the average Dividends Per Share Growth Rate was 6.90% per year.

During the past 13 years, the highest 3-Year average Dividends Per Share Growth Rate of Tacmina was 21.60% per year. The lowest was 0.00% per year. And the median was 10.70% per year.

The growth rate is calculated with least square regression.

For more information regarding to dividend, please check our Dividend Page.

* Please note that "special dividend" is not included in the calculation of dividend per share and related fields.

Tacmina (TSE:6322) Dividend Payout Ratio Explanation

In dividends investing, Dividend Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.

Tacmina Dividend Payout Ratio Related Terms

Tacmina Dividend Payout Ratio Historical Data

* Premium members only.

The historical data trend for Tacmina's Dividend Payout Ratio can be seen below:

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

Tacmina Dividend Payout Ratio Chart

Tacmina Annual Data

Trend

Mar17

Mar18

Mar19

Mar20

Mar21

Mar22

Mar23

Mar24

Mar25

Mar26

Dividend Payout Ratio

Get a 7-Day Free Trial

0.37

0.33

0.30

Tacmina Semi-Annual Data
	Sep16	Mar17	Sep17	Mar18	Sep18	Mar19	Sep19	Mar20	Sep20	Mar21	Sep21	Mar22	Sep22	Mar23	Sep23	Mar24	Sep24	Mar25	Sep25	Mar26
Dividend Payout Ratio	Get a 7-Day Free Trial															0.26	0.33	0.27	0.29	0.31

TSE:6322 vs GEV, ETN, PH: Dividend Payout Ratio Comparison

For the Specialty Industrial Machinery subindustry, Tacmina's Dividend Payout Ratio, along with its competitors' market caps and Dividend Payout Ratio data, can be viewed below:

* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.

Tacmina Dividend Payout Ratio vs Industrial Products Industry

For the Industrial Products industry and Industrials sector, Tacmina's Dividend Payout Ratio distribution charts can be found below:

* The bar in red indicates where Tacmina's Dividend Payout Ratio falls into.

Save Embed

81GF Score

Tacmina Corp TSE:6322

Dividend Payout Ratio is just one metric. See GF Score™, valuation, warning signs, and more.

View Full Analysis

Tacmina Dividend Payout Ratio Calculation

Tacmina's Dividend Payout Ratio for the fiscal year that ended in Mar. 2026 is calculated as

Dividend Payout Ratio	=	Dividends per Share (A: Mar. 2026 )	/	EPS without NRI (A: Mar. 2026 )
	=	54	/	179.984
	=	0.30

Tacmina's Dividend Payout Ratio for the quarter that ended in Mar. 2026 is calculated as

Dividend Payout Ratio	=	Dividends per Share (Q: Mar. 2026 )	/	EPS without NRI (Q: Mar. 2026 )
	=	29	/	94.181
	=	0.31

Frequently Asked Questions Learn more about Dividend Payout Ratio →

What does a Dividend Payout Ratio of 0.31 mean?

Tacmina (TSE:6322) has a Dividend Payout Ratio of 0.31 as of Mar. 2026. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Tacmina and its competitors. This is near median its historical median of 0.32. Over the past decade, Tacmina's Dividend Payout Ratio has ranged from 0.30 to 0.48. According to the industry distribution chart, Tacmina ranks #644 out of 1719 companies in the Industrial Products industry, placing it in the top 37.5%.

Is Tacmina's Dividend Payout Ratio too high?

Tacmina's current Dividend Payout Ratio of 0.31 is near median its 10-year median of 0.32. Over the past 10 years, this metric has ranged from a low of 0.30 to a high of 0.48. The Industrial Products industry median Dividend Payout Ratio is 0.37. Tacmina's value of 0.31 is 16.2% below this industry median. Based on the distribution chart, Tacmina ranks #644 out of 1719 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Tacmina has a GF Score™ of 81/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.

How does Tacmina's Dividend Payout Ratio compare to GEV and ETN?

According to the Industrial Products industry distribution chart, Tacmina ranks #644 out of 1719 companies for Dividend Payout Ratio. This puts Tacmina in the upper half of its industry. The industry median Dividend Payout Ratio is 0.37. Tacmina's value of 0.31 is 16.2% below this benchmark. Historically, Tacmina's own Dividend Payout Ratio has ranged from 0.30 to 0.48 over the past decade. While the company's 10-year median is 0.32 vs. the industry median of 0.37, Tacmina has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.

What is a good Dividend Payout Ratio for an Industrial Products company?

The median Dividend Payout Ratio among Industrial Products companies is 0.37, based on 1,719 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Payout Ratio significantly above this median, while those in the bottom quartile fall well below. However, Dividend Payout Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Tacmina's current Dividend Payout Ratio of 0.31 is 16.2% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.

What does a high Dividend Payout Ratio mean?

A high Dividend Payout Ratio can signal that a stock is expensive relative to its fundamentals. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Tacmina and its competitors. For the Industrial Products industry, the median Dividend Payout Ratio is 0.37 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Tacmina's current Dividend Payout Ratio is 0.31, which is near median its own 10-year median of 0.32. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.

Is Tacmina stock overvalued right now?

Based on GuruFocus' analysis, Tacmina (TSE:6322) is currently considered Modestly Undervalued. The stock's GF Value™ is 円1,826.73, compared to a current price of 円1,610.00 — trading 11.9% below its estimated fair value. The current Dividend Payout Ratio is 0.31, which is near median its 10-year median of 0.32 and 16.2% below the Industrial Products industry median of 0.37. Tacmina's overall GF Score™ is 81/100. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.

How is Dividend Payout Ratio calculated?

Dividend Payout Ratio is calculated from a company's financial statements. For Tacmina (TSE:6322), the current Dividend Payout Ratio is 0.31 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.

Is Tacmina (TSE:6322) Overvalued in 2026?

Based on GuruFocus' analysis, Tacmina stock appears to be undervalued. The current stock price of 円1,610.00 is trading 11.9% below its estimated GF Value™ of 円1,826.73. GuruFocus considers Tacmina to be Modestly Undervalued.

Key valuation signals for TSE:6322:

Dividend Payout Ratio: 0.31 (near median its 10-year median of 0.32)
GF Value™: 円1,826.73 vs. price of 円1,610.00 (11.9% below fair value)
GF Score™: 81/100
Industry Position: 16.2% below the Industrial Products median (#644 of 1719)

No single metric tells the full story. See the TSE:6322 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.

Tacmina Business Description

Industry Industrials Industrial Products

Comparable Companies TSE:6384 TSE:6161 TSE:5942 TSE:2883 TSE:6208 TSE:6405 TSE:6488 TSE:7435 TSE:6262 TSE:6149 GEV XTER:SIE XPAR:SU ETN XTER:ENR PH CMI OSTO:ATCO A EMR ITW

Address 2-2-14 Awajimachi, Chuo-ku, Osaka, JPN, 541-0047

Website https://www.tacmina.co.jp

Tacmina Corp manufactures metering pumps. The company's products profile includes Smoothflow pumps, Metering Pump Accessories, Chemical Injection Systems, Agitators, Solenoid-Driven Metering Pumps, Motor-Driven Metering Pumps, and others.

81GF Score

Get the complete analysis for TSE:6322

Dividend Payout Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.

円1,610.00

Price

円1,826.73

GF Value

View TSE:6322 Analysis

See Dividend Payout Ratio data for all stocks →