Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Finesse Technology CoROCO:7704 -2.26%69 PB Ratio is 1.75 as of Sep. 13, 2026, which is 6% below its 10-year median of 1.87. GuruFocus rates ROCO:7704 with a GF Score™ of 69/100 and a GF Value™ of NT$61.75 (Fairly Valued). The stock has 4 warning signs investors should review. Among 3,001 Industrial Products companies, Finesse Technology Co ranks better than 59.78% on this metric.
The historical rank and industry rank for Finesse Technology Co's PB Ratio or its related term are showing as below:
ROCO:7704'
s PB Ratio Range Over the Past 10 Years
Min: 1.22 Med: 1.87 Max: 4.27
Current: 1.75
During the past 6 years, Finesse Technology Co's highest PB Ratio was 4.27. The lowest was 1.22. And the median was 1.87.
ROCO:7704's PB Ratio is ranked better than 59.78% of 3001
companies
in the Industrial Products industry
Industry Median: 2.19
vs ROCO:7704: 1.75
During the past 12 months, Finesse Technology Co's average Book Value Per Share Growth Rate was 2.70% per year.
During the past 3 years, the average Book Value Per Share Growth Rate was 13.10% per year.
During the past 5 years, the average Book Value Per Share Growth Rate was 21.30% per year.
During the past 6 years, the highest 3-Year average Book Value Per Share Growth Rate of Finesse Technology Co was 30.10% per year. The lowest was 13.10% per year. And the median was 23.50% per year.
The PB Ratio works the best for the businesses that earn most of their profit from their assets, e.g. banks and insurance companies.
Be Aware
Some businesses have very light assets, such as software companies or insurance agencies. The PB Ratio does not work well for these companies. Some companies even have negative equity, so the PB Ratio cannot be applied to them.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Electrical Equipment & Parts subindustry, Finesse Technology Co's PB Ratio, along with its competitors' market caps and PB Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Finesse Technology Co PB Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Finesse Technology Co's PB Ratio distribution charts can be found below:
* The bar in red indicates where Finesse Technology Co's PB Ratio falls into.
The PB Ratio, or Price-to-Book ratio, or Price/Book, is a financial ratio used to compare a company's market price to its Book Value per Share. It is a ratio widely used to value stocks.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
It can also be calculated from the numbers for the whole company:
A closely related ratio is called Price-to-Tangible-Book. The difference between Price-to-Tangible-Book and PB Ratio is that book value other than intangibles are used in the calculation.
Finesse Technology Co (ROCO:7704) has a PB Ratio of 1.75 as of Sep. 13, 2026. Price-to-Book ratio is the ratio of share price to a company's book value per share. View historical data on Finesse Technology Co and its competitors. This is near median its historical median of 1.87. Over the past decade, Finesse Technology Co's PB Ratio has ranged from 1.22 to 4.27. According to the industry distribution chart, Finesse Technology Co ranks #1207 out of 3001 companies in the Industrial Products industry, placing it in the top 40.2%.
Is Finesse Technology Co's PB Ratio too high?
Finesse Technology Co's current PB Ratio of 1.75 is near median its 10-year median of 1.87. Over the past 10 years, this metric has ranged from a low of 1.22 to a high of 4.27. The Industrial Products industry median PB Ratio is 2.19. Finesse Technology Co's value of 1.75 is 20.1% below this industry median. Based on the distribution chart, Finesse Technology Co ranks #1207 out of 3001 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Finesse Technology Co has a GF Score™ of 69/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Finesse Technology Co's PB Ratio compare to VRT and BE?
According to the Industrial Products industry distribution chart, Finesse Technology Co ranks #1207 out of 3001 companies for PB Ratio. This puts Finesse Technology Co in the upper half of its industry. The industry median PB Ratio is 2.19. Finesse Technology Co's value of 1.75 is 20.1% below this benchmark. Historically, Finesse Technology Co's own PB Ratio has ranged from 1.22 to 4.27 over the past decade. While the company's 10-year median is 1.87 vs. the industry median of 2.19, Finesse Technology Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PB Ratio for an Industrial Products company?
The median PB Ratio among Industrial Products companies is 2.19, based on 3,001 companies in the industry. Companies in the top quartile (top 25%) have a PB Ratio significantly above this median, while those in the bottom quartile fall well below. However, PB Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Finesse Technology Co's current PB Ratio of 1.75 is 20.1% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PB Ratio mean?
A high PB Ratio can signal that a stock is expensive relative to its fundamentals. Price-to-Book ratio is the ratio of share price to a company's book value per share. View historical data on Finesse Technology Co and its competitors. For the Industrial Products industry, the median PB Ratio is 2.19 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Finesse Technology Co's current PB Ratio is 1.75, which is near median its own 10-year median of 1.87. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Finesse Technology Co stock overvalued right now?
Based on GuruFocus' analysis, Finesse Technology Co (ROCO:7704) is currently considered Fairly Valued. The stock's GF Value™ is NT$61.75, compared to a current price of NT$60.50 — trading 2% below its estimated fair value. The current PB Ratio is 1.75, which is near median its 10-year median of 1.87 and 20.1% below the Industrial Products industry median of 2.19. Finesse Technology Co's overall GF Score™ is 69/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PB Ratio calculated?
PB Ratio is calculated from a company's financial statements. For Finesse Technology Co (ROCO:7704), the current PB Ratio is 1.75 as of Sep. 13, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Finesse Technology Co (ROCO:7704) Overvalued in 2026?
Based on GuruFocus' analysis, Finesse Technology Co stock appears to be undervalued.
The current stock price of NT$60.50 is trading 2% below its estimated GF Value™ of NT$61.75.
GuruFocus considers Finesse Technology Co to be Fairly Valued.
Key valuation signals for ROCO:7704:
PB Ratio: 1.75 (near median its 10-year median of 1.87)
GF Value™: NT$61.75 vs. price of NT$60.50 (2% below fair value)
Industry Position: 20.1% below the Industrial Products median (#1207 of 3001)
No single metric tells the full story. See the ROCO:7704 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Finesse Technology Co Ltd is a company that is focused on the development of ozone generators, RPS generators, RF systems, microwave devices, electronic circuits, control systems, and other core technologies. Additionally, the company offers technical support, maintenance, and product manufacturing services. Its main sales and service area is the semiconductor industry. The company's own brand product portfolio comprises gas pressure regulators, ozone sensors, remote plasma source, ozone controllers, RF generator system, ozone generators, etc. Finesse Technology operates in a single operating segment: the manufacturing, repair, and trading of electronic components. Geographically, it generates maximum revenue from Taiwan, and the rest from Asia (excluding Taiwan), America, and Europe.
69GF Score
Get the complete analysis for ROCO:7704
PB Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:7704 has been successfully added to your 
