GURUFOCUS.COM » STOCK LIST » Industrials » Industrial Products » Danieli & C. Officine Meccaniche SpA (CHIX:DANRm) » Definitions » PE Ratio

Danieli & C. Officine Meccaniche SpA (CHIX:DANRM) PE Ratio : 5.92 (As of Dec. 16, 2024)


View and export this data going back to 2013. Start your Free Trial

What is Danieli & C. Officine Meccaniche SpA PE Ratio?

The PE Ratio, or Price-to-Earnings ratio, or P/E Ratio, is a financial ratio used to compare a company's market price to its Earnings per Share (Diluted). As of today (2024-12-16), Danieli & C. Officine Meccaniche SpA's share price is €19.22. Danieli & C. Officine Meccaniche SpA's Earnings per Share (Diluted) for the trailing twelve months (TTM) ended in Jun. 2024 was €3.24. Therefore, Danieli & C. Officine Meccaniche SpA's PE Ratio for today is 5.92.

Good Sign:

Danieli & C. Officine Meccaniche SpA stock PE Ratio (=7.71) is close to 1-year low of 7.62

During the past 13 years, Danieli & C. Officine Meccaniche SpA's highest PE Ratio was 35.20. The lowest was 5.44. And the median was 15.71.

Danieli & C. Officine Meccaniche SpA's EPS (Diluted) for the six months ended in Jun. 2024 was €1.92. Its EPS (Diluted) for the trailing twelve months (TTM) ended in Jun. 2024 was €3.24.

As of today (2024-12-16), Danieli & C. Officine Meccaniche SpA's share price is €19.22. Danieli & C. Officine Meccaniche SpA's EPS without NRI for the trailing twelve months (TTM) ended in Jun. 2024 was €3.66. Therefore, Danieli & C. Officine Meccaniche SpA's PE Ratio without NRI ratio for today is 5.25.

During the past 13 years, Danieli & C. Officine Meccaniche SpA's highest PE Ratio without NRI was 24.68. The lowest was 4.83. And the median was 10.82.

Danieli & C. Officine Meccaniche SpA's EPS without NRI for the six months ended in Jun. 2024 was €2.39. Its EPS without NRI for the trailing twelve months (TTM) ended in Jun. 2024 was €3.66.

During the past 12 months, Danieli & C. Officine Meccaniche SpA's average EPS without NRI Growth Rate was 6.30% per year. During the past 3 years, the average EPS without NRI Growth Rate was 40.80% per year. During the past 5 years, the average EPS without NRI Growth Rate was 29.90% per year. During the past 10 years, the average EPS without NRI Growth Rate was 6.80% per year.

During the past 13 years, Danieli & C. Officine Meccaniche SpA's highest 3-Year average EPS without NRI Growth Rate was 63.10% per year. The lowest was -24.90% per year. And the median was 12.40% per year.

Danieli & C. Officine Meccaniche SpA's EPS (Basic) for the six months ended in Jun. 2024 was €1.92. Its EPS (Basic) for the trailing twelve months (TTM) ended in Jun. 2024 was €3.24.

Back to Basics: PE Ratio


Danieli & C. Officine Meccaniche SpA PE Ratio Historical Data

The historical data trend for Danieli & C. Officine Meccaniche SpA's PE Ratio can be seen below:

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

* Premium members only.

Danieli & C. Officine Meccaniche SpA PE Ratio Chart

Danieli & C. Officine Meccaniche SpA Annual Data
Trend Jun15 Jun16 Jun17 Jun18 Jun19 Jun20 Jun21 Jun22 Jun23 Jun24
PE Ratio
Get a 7-Day Free Trial Premium Member Only Premium Member Only 13.47 20.60 6.63 6.69 10.98

Danieli & C. Officine Meccaniche SpA Semi-Annual Data
Dec14 Jun15 Dec15 Jun16 Dec16 Jun17 Dec17 Jun18 Dec18 Jun19 Dec19 Jun20 Dec20 Jun21 Dec21 Jun22 Dec22 Jun23 Dec23 Jun24
PE Ratio Get a 7-Day Free Trial Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only 6.63 At Loss 6.69 At Loss 10.98

Competitive Comparison of Danieli & C. Officine Meccaniche SpA's PE Ratio

For the Specialty Industrial Machinery subindustry, Danieli & C. Officine Meccaniche SpA's PE Ratio, along with its competitors' market caps and PE Ratio data, can be viewed below:

* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.


Danieli & C. Officine Meccaniche SpA's PE Ratio Distribution in the Industrial Products Industry

For the Industrial Products industry and Industrials sector, Danieli & C. Officine Meccaniche SpA's PE Ratio distribution charts can be found below:

* The bar in red indicates where Danieli & C. Officine Meccaniche SpA's PE Ratio falls into.



Danieli & C. Officine Meccaniche SpA PE Ratio Calculation

The PE Ratio, or Price-to-Earnings ratio, or P/E Ratio, is a financial ratio used to compare a company's market price to its Earnings per Share (Diluted). It is the most widely used ratio in the valuation of stocks.

Danieli & C. Officine Meccaniche SpA's PE Ratio for today is calculated as

PE Ratio=Share Price/Earnings per Share (Diluted) (TTM)
=19.22/3.244
=5.92

Danieli & C. Officine Meccaniche SpA's Share Price of today is €19.22.
For company reported semi-annually, Danieli & C. Officine Meccaniche SpA's Earnings per Share (Diluted) for the trailing twelve months (TTM) ended in Jun. 2024 adds up the semi-annually data reported by the company within the most recent 12 months, which was €3.24.


* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

It can also be calculated from the numbers for the whole company:


There are at least three kinds of PE Ratios used by different investors. They are Trailing Twelve Month PE Ratio, Forward PE Ratio, or PE Ratio without NRI. A new PE Ratio based on inflation-adjusted normalized PE Ratio is called Shiller PE Ratio, after Yale professor Robert Shiller.

In the calculation of PE Ratio, the earnings per share used are the earnings per share over the past 12 months. For Forward PE Ratio, the earnings are the expected earnings for the next twelve months. In the case of PE Ratio without NRI, the reported earnings less the non-recurring items are used.

For Shiller PE Ratio, the earnings of the past 10 years are inflation-adjusted and averaged. Since it looks at the average over the last 10 years, Shiller PE Ratio is also called PE10.


Danieli & C. Officine Meccaniche SpA  (CHIX:DANRm) PE Ratio Explanation

The PE Ratio can be viewed as the number of years it takes for the company to earn back the price you pay for the stock. For example, if a company earns $2 a share per year, and the stock is traded at $30, the PE Ratio is 15. Therefore it takes 15 years for the company to earn back the $30 you paid for its stock, assuming the earnings stays constant over the next 15 years.

In real business, earnings never stay constant. If a company can grow its earnings, it takes fewer years for the company to earn back the price you pay for the stock. If a company's earnings decline it takes more years. As a shareholder, you want the company to earn back the price you pay as soon as possible. Therefore, lower P/E stocks are more attractive than higher P/E stocks so long as the PE Ratio is positive. Also for stocks with the same PE Ratio, the one with faster growth business is more attractive.

If a company loses money, the PE Ratio becomes meaningless.

To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the PE Ratio divided by the growth ratio. He thinks a company with a PE Ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a PE Ratio of 20, instead of a company growing 10% a year with a PE Ratio of 10.

Because the PE Ratio measures how long it takes to earn back the price you pay, the PE Ratio can be applied to the stocks across different industries. That is why it is the one of the most important and widely used indicators for the valuation of stocks.

Similar to the PE Ratio without NRI or PS Ratio or Price-to-Operating-Cash-Flow or Price-to-Free-Cash-Flow , the PE Ratio measures the valuation based on the earning power of the company. This is where it is different from the PB Ratio , which measures the valuation based on the company's balance sheet.


Be Aware

Investors need to be aware that the PE Ratio can be misleading a lot of times, especially when the underlying business is cyclical and unpredictable. As Peter Lynch pointed out, cyclical businesses have higher profit margins at the peaks of the business cycles. Their earnings are high and PE Ratios are artificially low. It is usually a bad idea to buy a cyclical business when the PE Ratio is low. A better ratio to identify the time to buy a cyclical businesses is the PS Ratio.

PE Ratio can also be affected by non-recurring-items such as the sale of part of businesses. This may increase for the current year or quarter dramatically. But it cannot be repeated over and over. Therefore PE Ratio without NRI is a more accurate indication of valuation than PE Ratio.


Danieli & C. Officine Meccaniche SpA PE Ratio Related Terms

Thank you for viewing the detailed overview of Danieli & C. Officine Meccaniche SpA's PE Ratio provided by GuruFocus.com. Please click on the following links to see related term pages.


Danieli & C. Officine Meccaniche SpA Business Description

Address
Via Nazionale 41, Buttrio, Udine, ITA, 33042
Danieli & C. Officine Meccaniche SpA is an Italy-based company that is engaged in manufacturing and distribution of steel and other nonferrous metal products as well as plant building. The company operates through two segments, namely steelmaking and plant making. The Steelmaking segment manufactures ingots, forged bars, blooms, rolled bars, bar in coils and others. End customers primarily come from the mechanical, automotive, oil & gas, power generation and other sectors. The Plant Making segment designs and builds mines, pellet production plants, furnaces, rolling mills and other various plants and facilities. The company has a global presence, with Europe, Middle East and Far East being the three largest markets for the company.

Danieli & C. Officine Meccaniche SpA Headlines

No Headlines