Austin EngineeringASX:ANG 53 PEG Ratio is 0.23 as of Jul. 08, 2026, which is 55% below its 10-year median of 0.51. GuruFocus rates ASX:ANG with a GF Score™ of 53/100 and a GF Value™ of A$0.40 (Significantly Undervalued). The stock has 6 warning signs investors should review. Among 104 Farm & Heavy Construction Machinery companies, Austin Engineering ranks better than 93.27% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Austin Engineering's PEG Ratio or its related term are showing as below:
ASX:ANG'
s PEG Ratio Range Over the Past 10 Years
Min: 0.14 Med: 0.51 Max: 2.17
Current: 0.23
During the past 13 years, Austin Engineering's highest PEG Ratio was 2.17. The lowest was 0.14. And the median was 0.51.
ASX:ANG's PEG Ratio is ranked better than 93.27% of 104
companies
in the Farm & Heavy Construction Machinery industry
Industry Median: 1.08
vs ASX:ANG: 0.23
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Austin Engineering (ASX:ANG) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Austin Engineering PEG Ratio Related Terms
Austin Engineering PEG Ratio Historical Data
* Premium members only.
The historical data trend for Austin Engineering's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Farm & Heavy Construction Machinery subindustry, Austin Engineering's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Austin Engineering PEG Ratio vs Farm & Heavy Construction Machinery Industry
For the Farm & Heavy Construction Machinery industry and Industrials sector, Austin Engineering's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Austin Engineering's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Austin Engineering (ASX:ANG) has a PEG Ratio of 0.23 as of Jul. 08, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Austin Engineering and its competitors. This is 55% below median its historical median of 0.51. Over the past decade, Austin Engineering's PEG Ratio has ranged from 0.14 to 2.17. According to the industry distribution chart, Austin Engineering ranks #7 out of 104 companies in the Farm & Heavy Construction Machinery industry, placing it in the top 6.7%.
Is Austin Engineering's PEG Ratio too high?
Austin Engineering's current PEG Ratio of 0.23 is 55% below median its 10-year median of 0.51. Over the past 10 years, this metric has ranged from a low of 0.14 to a high of 2.17. The Farm & Heavy Construction Machinery industry median PEG Ratio is 1.08. Austin Engineering's value of 0.23 is 78.7% below this industry median. Based on the distribution chart, Austin Engineering ranks #7 out of 104 companies in the Farm & Heavy Construction Machinery industry, which is in the top quartile — a strong position relative to peers. Overall, Austin Engineering has a GF Score™ of 53/100 and is considered Significantly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Austin Engineering's PEG Ratio compare to CAT and DE?
According to the Farm & Heavy Construction Machinery industry distribution chart, Austin Engineering ranks #7 out of 104 companies for PEG Ratio. This places Austin Engineering in the top 7% of its industry — outperforming the majority of peers. The industry median PEG Ratio is 1.08. Austin Engineering's value of 0.23 is 78.7% below this benchmark. Historically, Austin Engineering's own PEG Ratio has ranged from 0.14 to 2.17 over the past decade. While the company's 10-year median is 0.51 vs. the industry median of 1.08, Austin Engineering has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Farm & Heavy Construction Machinery company?
The median PEG Ratio among Farm & Heavy Construction Machinery companies is 1.08, based on 104 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Austin Engineering's current PEG Ratio of 0.23 is 78.7% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Austin Engineering and its competitors. For the Farm & Heavy Construction Machinery industry, the median PEG Ratio is 1.08 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Austin Engineering's current PEG Ratio is 0.23, which is 55% below median its own 10-year median of 0.51. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Austin Engineering stock overvalued right now?
Based on GuruFocus' analysis, Austin Engineering (ASX:ANG) is currently considered Significantly Undervalued. The stock's GF Value™ is A$0.40, compared to a current price of A$0.15 — trading 63.8% below its estimated fair value. The current PEG Ratio is 0.23, which is 55% below median its 10-year median of 0.51 and 78.7% below the Farm & Heavy Construction Machinery industry median of 1.08. Austin Engineering's overall GF Score™ is 53/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Austin Engineering (ASX:ANG), the current PEG Ratio is 0.23 as of Jul. 08, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Austin Engineering (ASX:ANG) Overvalued in 2026?
Based on GuruFocus' analysis, Austin Engineering stock appears to be undervalued.
The current stock price of A$0.15 is trading 63.8% below its estimated GF Value™ of A$0.40.
GuruFocus considers Austin Engineering to be Significantly Undervalued.
Key valuation signals for ASX:ANG:
PEG Ratio: 0.23 (55% below median its 10-year median of 0.51)
GF Value™: A$0.40 vs. price of A$0.15 (63.8% below fair value)
Industry Position: 78.7% below the Farm & Heavy Construction Machinery median (#7 of 104)
No single metric tells the full story. See the ASX:ANG stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Austin Engineering Ltd is an Australian-based engineering company. It designs and manufactures customized off-highway truck bodies, buckets, water tanks, tyre handlers, and other ancillary products. It is a comprehensive service provider throughout the product's life cycle, offering both on-site and off-site repair and maintenance. Its geographical segments include Asia-Pacific, North America, and South America. The company generates maximum revenue from the Asia-Pacific segment, which is engaged in mining equipment, other products, and repair and maintenance services located in Australia and Indonesia.
53GF Score
Get the complete analysis for ASX:ANG
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ASX:ANG has been successfully added to your 
