Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Suzhou Bearing Factory CoBJSE:920418 84 PEG Ratio is 2.58 as of Sep. 12, 2026, which is 26% below its 10-year median of 3.50. GuruFocus rates BJSE:920418 with a GF Score™ of 84/100 and a GF Value™ of ¥24.31 (Modestly Undervalued). The stock has 1 warning sign investors should review. Among 1,273 Industrial Products companies, Suzhou Bearing Factory Co ranks worse than 65.2% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Suzhou Bearing Factory Co's PEG Ratio or its related term are showing as below:
BJSE:920418'
s PEG Ratio Range Over the Past 10 Years
Min: 0.78 Med: 3.5 Max: 22.45
Current: 2.58
During the past 13 years, Suzhou Bearing Factory Co's highest PEG Ratio was 22.45. The lowest was 0.78. And the median was 3.50.
BJSE:920418's PEG Ratio is ranked worse than 65.2% of 1273
companies
in the Industrial Products industry
Industry Median: 1.71
vs BJSE:920418: 2.58
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Suzhou Bearing Factory Co (BJSE:920418) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Suzhou Bearing Factory Co PEG Ratio Related Terms
Suzhou Bearing Factory Co PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
BJSE:920418 vs SNA, RBC, LECO: PEG Ratio Comparison
For the Tools & Accessories subindustry, Suzhou Bearing Factory Co's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Suzhou Bearing Factory Co PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Suzhou Bearing Factory Co's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Suzhou Bearing Factory Co's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Suzhou Bearing Factory Co (BJSE:920418) has a PEG Ratio of 2.58 as of Sep. 12, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Suzhou Bearing Factory Co and its competitors. This is 26% below median its historical median of 3.50. Over the past decade, Suzhou Bearing Factory Co's PEG Ratio has ranged from 0.78 to 22.45. According to the industry distribution chart, Suzhou Bearing Factory Co ranks #830 out of 1273 companies in the Industrial Products industry, placing it in the top 65.2%.
Is Suzhou Bearing Factory Co's PEG Ratio too high?
Suzhou Bearing Factory Co's current PEG Ratio of 2.58 is 26% below median its 10-year median of 3.50. Over the past 10 years, this metric has ranged from a low of 0.78 to a high of 22.45. The Industrial Products industry median PEG Ratio is 1.71. Suzhou Bearing Factory Co's value of 2.58 is 50.9% above this industry median. Based on the distribution chart, Suzhou Bearing Factory Co ranks #830 out of 1273 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Suzhou Bearing Factory Co has a GF Score™ of 84/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Suzhou Bearing Factory Co's PEG Ratio compare to SNA and RBC?
According to the Industrial Products industry distribution chart, Suzhou Bearing Factory Co ranks #830 out of 1273 companies for PEG Ratio. This places Suzhou Bearing Factory Co in the lower half of its industry. The industry median PEG Ratio is 1.71. Suzhou Bearing Factory Co's value of 2.58 is 50.9% above this benchmark. Historically, Suzhou Bearing Factory Co's own PEG Ratio has ranged from 0.78 to 22.45 over the past decade. While the company's 10-year median is 3.50 vs. the industry median of 1.71, Suzhou Bearing Factory Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.71, based on 1,273 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Suzhou Bearing Factory Co's current PEG Ratio of 2.58 is 50.9% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Suzhou Bearing Factory Co and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.71 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Suzhou Bearing Factory Co's current PEG Ratio is 2.58, which is 26% below median its own 10-year median of 3.50. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Suzhou Bearing Factory Co stock overvalued right now?
Based on GuruFocus' analysis, Suzhou Bearing Factory Co (BJSE:920418) is currently considered Modestly Undervalued. The stock's GF Value™ is ¥24.31, compared to a current price of ¥17.59 — trading 27.6% below its estimated fair value. The current PEG Ratio is 2.58, which is 26% below median its 10-year median of 3.50 and 50.9% above the Industrial Products industry median of 1.71. Suzhou Bearing Factory Co's overall GF Score™ is 84/100 with 1 warning sign to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Suzhou Bearing Factory Co (BJSE:920418), the current PEG Ratio is 2.58 as of Sep. 12, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Suzhou Bearing Factory Co (BJSE:920418) Overvalued in 2026?
Based on GuruFocus' analysis, Suzhou Bearing Factory Co stock appears to be undervalued.
The current stock price of ¥17.59 is trading 27.6% below its estimated GF Value™ of ¥24.31.
GuruFocus considers Suzhou Bearing Factory Co to be Modestly Undervalued.
Key valuation signals for BJSE:920418:
PEG Ratio: 2.58 (26% below median its 10-year median of 3.50)
GF Value™: ¥24.31 vs. price of ¥17.59 (27.6% below fair value)
Industry Position: 50.9% above the Industrial Products median (#830 of 1273)
No single metric tells the full story. See the BJSE:920418 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Suzhou Bearing Factory Co Ltd is engaged in the production and sales of mechanical and equipment components such as bearings and rolling elements. It specializes in the design and manufacture of needle roller bearings, cylindrical roller bearings, and needle rollers. Products include Drawn cup needle roller bearings, Drawn cup roller clutch, Roller Needle Bearings, etc.
84GF Score
Get the complete analysis for BJSE:920418
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BJSE:920418 has been successfully added to your 
