Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Investment & Precision Castings's PEG Ratio or its related term are showing as below:
BOM:504786'
s PEG Ratio Range Over the Past 10 Years
Min: 0.99 Med: 2.92 Max: 5.77
Current: 4.12
During the past 13 years, Investment & Precision Castings's highest PEG Ratio was 5.77. The lowest was 0.99. And the median was 2.92.
BOM:504786's PEG Ratio is ranked worse than 77.5% of 200
companies
in the Steel industry
Industry Median: 1.43
vs BOM:504786: 4.12
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Investment & Precision Castings (BOM:504786) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Investment & Precision Castings PEG Ratio Related Terms
Investment & Precision Castings PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Steel subindustry, Investment & Precision Castings's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Investment & Precision Castings PEG Ratio vs Steel Industry
For the Steel industry and Basic Materials sector, Investment & Precision Castings's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Investment & Precision Castings's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Investment & Precision Castings (BOM:504786) has a PEG Ratio of 4.12 as of Jul. 28, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Investment & Precision Castings and its competitors. This is 41% above median its historical median of 2.92. Over the past decade, Investment & Precision Castings' PEG Ratio has ranged from 0.99 to 5.77. According to the industry distribution chart, Investment & Precision Castings ranks #155 out of 200 companies in the Steel industry, placing it in the top 77.5%.
Is Investment & Precision Castings' PEG Ratio too high?
Investment & Precision Castings' current PEG Ratio of 4.12 is 41% above median its 10-year median of 2.92. Over the past 10 years, this metric has ranged from a low of 0.99 to a high of 5.77. The Steel industry median PEG Ratio is 1.43. Investment & Precision Castings' value of 4.12 is 188.1% above this industry median. Based on the distribution chart, Investment & Precision Castings ranks #155 out of 200 companies in the Steel industry, which is in the bottom quartile relative to peers. Overall, Investment & Precision Castings has a GF Score™ of 57/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Investment & Precision Castings' PEG Ratio compare to NUE and STLD?
According to the Steel industry distribution chart, Investment & Precision Castings ranks #155 out of 200 companies for PEG Ratio. This places Investment & Precision Castings in the lower half of its industry. The industry median PEG Ratio is 1.43. Investment & Precision Castings' value of 4.12 is 188.1% above this benchmark. Historically, Investment & Precision Castings' own PEG Ratio has ranged from 0.99 to 5.77 over the past decade. While the company's 10-year median is 2.92 vs. the industry median of 1.43, Investment & Precision Castings has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Steel company?
The median PEG Ratio among Steel companies is 1.43, based on 200 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Investment & Precision Castings's current PEG Ratio of 4.12 is 188.1% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Investment & Precision Castings and its competitors. For the Steel industry, the median PEG Ratio is 1.43 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Investment & Precision Castings's current PEG Ratio is 4.12, which is 41% above median its own 10-year median of 2.92. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Investment & Precision Castings stock overvalued right now?
Based on GuruFocus' analysis, Investment & Precision Castings (BOM:504786) is currently considered Significantly Overvalued. The stock's GF Value™ is ₹464.15, compared to a current price of ₹1,002.50 — trading 116% above its estimated fair value. The current PEG Ratio is 4.12, which is 41% above median its 10-year median of 2.92 and 188.1% above the Steel industry median of 1.43. Investment & Precision Castings' overall GF Score™ is 57/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Investment & Precision Castings (BOM:504786), the current PEG Ratio is 4.12 as of Jul. 28, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Investment & Precision Castings (BOM:504786) Overvalued in 2026?
Based on GuruFocus' analysis, Investment & Precision Castings stock appears to be overvalued.
The current stock price of ₹1,002.50 is trading 116% above its estimated GF Value™ of ₹464.15.
GuruFocus considers Investment & Precision Castings to be Significantly Overvalued.
Key valuation signals for BOM:504786:
PEG Ratio: 4.12 (41% above median its 10-year median of 2.92)
GF Value™: ₹464.15 vs. price of ₹1,002.50 (116% above fair value)
Industry Position: 188.1% above the Steel median (#155 of 200)
No single metric tells the full story. See the BOM:504786 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Investment & Precision Castings Business Description
Investment & Precision Castings Ltd is engaged in the steel casting business. The company's products portfolio includes two-three-four-wheeler, bus tractor parts; aircraft parts; turbochargers for diesel engines; power plants, pumps and valves, medical implants; electrical and instrumentation; general engineering; electronics; electronics; compressors; artisan castings; and machined components from bar stock. The company also provides its products and services to ancillaries and the wind power generation industry. It operates in two segments Investment Castings and Power Generation. The majority of the company's revenue comes from the Investment Castings segment.
57GF Score
Get the complete analysis for BOM:504786
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:504786 has been successfully added to your 
