Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
International ConveyorsBOM:509709 +0.54%73 PEG Ratio is 0.18 as of Jul. 20, 2026, which is 64% above its 10-year median of 0.11. GuruFocus rates BOM:509709 with a GF Score™ of 73/100 and a GF Value™ of ₹120.81 (Possible Value Trap). The stock has 2 warning signs investors should review. Among 1,277 Industrial Products companies, International Conveyors ranks better than 98.04% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for International Conveyors's PEG Ratio or its related term are showing as below:
BOM:509709'
s PEG Ratio Range Over the Past 10 Years
Min: 0.07 Med: 0.11 Max: 2.22
Current: 0.18
During the past 13 years, International Conveyors's highest PEG Ratio was 2.22. The lowest was 0.07. And the median was 0.11.
BOM:509709's PEG Ratio is ranked better than 98.04% of 1277
companies
in the Industrial Products industry
Industry Median: 1.76
vs BOM:509709: 0.18
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
International Conveyors (BOM:509709) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, International Conveyors's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
International Conveyors PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, International Conveyors's PEG Ratio distribution charts can be found below:
* The bar in red indicates where International Conveyors's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
International Conveyors (BOM:509709) has a PEG Ratio of 0.18 as of Jul. 20, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on International Conveyors and its competitors. This is 64% above median its historical median of 0.11. Over the past decade, International Conveyors' PEG Ratio has ranged from 0.07 to 2.22. According to the industry distribution chart, International Conveyors ranks #25 out of 1277 companies in the Industrial Products industry, placing it in the top 2%.
Is International Conveyors' PEG Ratio too high?
International Conveyors' current PEG Ratio of 0.18 is 64% above median its 10-year median of 0.11. Over the past 10 years, this metric has ranged from a low of 0.07 to a high of 2.22. The Industrial Products industry median PEG Ratio is 1.76. International Conveyors' value of 0.18 is 89.8% below this industry median. Based on the distribution chart, International Conveyors ranks #25 out of 1277 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, International Conveyors has a GF Score™ of 73/100 and is considered Possible Value Trap, reflecting its overall financial health beyond just this single metric.
How does International Conveyors' PEG Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, International Conveyors ranks #25 out of 1277 companies for PEG Ratio. This places International Conveyors in the top 2% of its industry — outperforming the majority of peers. The industry median PEG Ratio is 1.76. International Conveyors' value of 0.18 is 89.8% below this benchmark. Historically, International Conveyors' own PEG Ratio has ranged from 0.07 to 2.22 over the past decade. While the company's 10-year median is 0.11 vs. the industry median of 1.76, International Conveyors has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.76, based on 1,277 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. International Conveyors's current PEG Ratio of 0.18 is 89.8% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on International Conveyors and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.76 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. International Conveyors's current PEG Ratio is 0.18, which is 64% above median its own 10-year median of 0.11. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is International Conveyors stock overvalued right now?
Based on GuruFocus' analysis, International Conveyors (BOM:509709) is currently considered Possible Value Trap. The stock's GF Value™ is ₹120.81, compared to a current price of ₹77.70 — trading 35.7% below its estimated fair value. The current PEG Ratio is 0.18, which is 64% above median its 10-year median of 0.11 and 89.8% below the Industrial Products industry median of 1.76. International Conveyors' overall GF Score™ is 73/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For International Conveyors (BOM:509709), the current PEG Ratio is 0.18 as of Jul. 20, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is International Conveyors (BOM:509709) Overvalued in 2026?
Based on GuruFocus' analysis, International Conveyors stock appears to be undervalued.
The current stock price of ₹77.70 is trading 35.7% below its estimated GF Value™ of ₹120.81.
GuruFocus considers International Conveyors to be Possible Value Trap.
Key valuation signals for BOM:509709:
PEG Ratio: 0.18 (64% above median its 10-year median of 0.11)
GF Value™: ₹120.81 vs. price of ₹77.70 (35.7% below fair value)
Industry Position: 89.8% below the Industrial Products median (#25 of 1277)
No single metric tells the full story. See the BOM:509709 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
International Conveyors Ltd is engaged in manufacturing and trading of Conveyor belting and fitting and accessories; and generation and sale of power. The company is manufactures and markets solid woven fabric reinforced PVC impregnated and PVC covered fire retardant, anti static conveyor belting. The company operates its business through the segments of Conveyor Belting, Wind Energy, Trading Goods, and Treasury segment. The Conveyor Belting segment, which is the key revenue driver, includes PVC fire-resistant antistatic solid woven coal conveyor belting whereas the Wind Energy segment includes generation, supply, and sale of wind power. The group sells its products in India and also exports them to other countries, of which key revenue is derived from the export sales made.
73GF Score
Get the complete analysis for BOM:509709
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:509709 has been successfully added to your 
