Bemco HydraulicsBOM:522650 +3.67%81 PEG Ratio is 1.19 as of Jul. 13, 2026, which is 14% below its 10-year median of 1.38. GuruFocus rates BOM:522650 with a GF Score™ of 81/100 and a GF Value™ of ₹89.29 (Modestly Overvalued). The stock has 4 warning signs investors should review. Among 1,276 Industrial Products companies, Bemco Hydraulics ranks better than 64.5% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Bemco Hydraulics's PEG Ratio or its related term are showing as below:
BOM:522650'
s PEG Ratio Range Over the Past 10 Years
Min: 0.28 Med: 1.38 Max: 1.73
Current: 1.19
During the past 13 years, Bemco Hydraulics's highest PEG Ratio was 1.73. The lowest was 0.28. And the median was 1.38.
BOM:522650's PEG Ratio is ranked better than 64.5% of 1276
companies
in the Industrial Products industry
Industry Median: 1.82
vs BOM:522650: 1.19
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Bemco Hydraulics (BOM:522650) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Bemco Hydraulics PEG Ratio Related Terms
Bemco Hydraulics PEG Ratio Historical Data
* Premium members only.
The historical data trend for Bemco Hydraulics's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, Bemco Hydraulics's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Bemco Hydraulics PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Bemco Hydraulics's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Bemco Hydraulics's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Bemco Hydraulics (BOM:522650) has a PEG Ratio of 1.19 as of Jul. 13, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Bemco Hydraulics and its competitors. This is 14% below median its historical median of 1.38. Over the past decade, Bemco Hydraulics' PEG Ratio has ranged from 0.28 to 1.73. According to the industry distribution chart, Bemco Hydraulics ranks #453 out of 1276 companies in the Industrial Products industry, placing it in the top 35.5%.
Is Bemco Hydraulics' PEG Ratio too high?
Bemco Hydraulics' current PEG Ratio of 1.19 is 14% below median its 10-year median of 1.38. Over the past 10 years, this metric has ranged from a low of 0.28 to a high of 1.73. The Industrial Products industry median PEG Ratio is 1.82. Bemco Hydraulics' value of 1.19 is 34.6% below this industry median. Based on the distribution chart, Bemco Hydraulics ranks #453 out of 1276 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Bemco Hydraulics has a GF Score™ of 81/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Bemco Hydraulics' PEG Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Bemco Hydraulics ranks #453 out of 1276 companies for PEG Ratio. This puts Bemco Hydraulics in the upper half of its industry. The industry median PEG Ratio is 1.82. Bemco Hydraulics' value of 1.19 is 34.6% below this benchmark. Historically, Bemco Hydraulics' own PEG Ratio has ranged from 0.28 to 1.73 over the past decade. While the company's 10-year median is 1.38 vs. the industry median of 1.82, Bemco Hydraulics has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.82, based on 1,276 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Bemco Hydraulics's current PEG Ratio of 1.19 is 34.6% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Bemco Hydraulics and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.82 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Bemco Hydraulics's current PEG Ratio is 1.19, which is 14% below median its own 10-year median of 1.38. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Bemco Hydraulics stock overvalued right now?
Based on GuruFocus' analysis, Bemco Hydraulics (BOM:522650) is currently considered Modestly Overvalued. The stock's GF Value™ is ₹89.29, compared to a current price of ₹99.20 — trading 11.1% above its estimated fair value. The current PEG Ratio is 1.19, which is 14% below median its 10-year median of 1.38 and 34.6% below the Industrial Products industry median of 1.82. Bemco Hydraulics' overall GF Score™ is 81/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Bemco Hydraulics (BOM:522650), the current PEG Ratio is 1.19 as of Jul. 13, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Bemco Hydraulics (BOM:522650) Overvalued in 2026?
Based on GuruFocus' analysis, Bemco Hydraulics stock appears to be overvalued.
The current stock price of ₹99.20 is trading 11.1% above its estimated GF Value™ of ₹89.29.
GuruFocus considers Bemco Hydraulics to be Modestly Overvalued.
Key valuation signals for BOM:522650:
PEG Ratio: 1.19 (14% below median its 10-year median of 1.38)
GF Value™: ₹89.29 vs. price of ₹99.20 (11.1% above fair value)
Industry Position: 34.6% below the Industrial Products median (#453 of 1276)
No single metric tells the full story. See the BOM:522650 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Bemco Hydraulics Ltd is an India-based company operating in the manufacturing and sale of hydraulic press machine, portable re-railing equipment, high-performance components, and systems. The company's products are used in heavy engineering works, Aeronautics, defense, Railways, Automobile, forging, and Sheet metal. Its product includes C Frame/Throat Type Presses, Straightening Press, Sheet Metal Forming, Moulding Presses, Baling Presses, SPMs, and Hydraulic Wheel Fitting Presses. The company generates maximum revenue from Portable Re-Railing Equipements.
81GF Score
Get the complete analysis for BOM:522650
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:522650 has been successfully added to your 
