Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Padmanabh Alloys & PolymersBOM:531779 -5.00%73 PEG Ratio is 6.09 as of Jul. 29, 2026, which is 52% below its 10-year median of 12.69. GuruFocus rates BOM:531779 with a GF Score™ of 73/100 and a GF Value™ of ₹24.63 (Significantly Undervalued). The stock has 3 warning signs investors should review. Among 613 Chemicals companies, Padmanabh Alloys & Polymers ranks worse than 79.77% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Padmanabh Alloys & Polymers's PEG Ratio or its related term are showing as below:
BOM:531779'
s PEG Ratio Range Over the Past 10 Years
Min: 3.16 Med: 12.69 Max: 120.66
Current: 6.09
During the past 12 years, Padmanabh Alloys & Polymers's highest PEG Ratio was 120.66. The lowest was 3.16. And the median was 12.69.
BOM:531779's PEG Ratio is ranked worse than 79.77% of 613
companies
in the Chemicals industry
Industry Median: 2.07
vs BOM:531779: 6.09
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Padmanabh Alloys & Polymers (BOM:531779) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Padmanabh Alloys & Polymers PEG Ratio Related Terms
Padmanabh Alloys & Polymers PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Chemicals subindustry, Padmanabh Alloys & Polymers's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Padmanabh Alloys & Polymers PEG Ratio vs Chemicals Industry
For the Chemicals industry and Basic Materials sector, Padmanabh Alloys & Polymers's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Padmanabh Alloys & Polymers's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Padmanabh Alloys & Polymers (BOM:531779) has a PEG Ratio of 6.09 as of Jul. 29, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Padmanabh Alloys & Polymers and its competitors. This is 52% below median its historical median of 12.69. Over the past decade, Padmanabh Alloys & Polymers' PEG Ratio has ranged from 3.16 to 120.66. According to the industry distribution chart, Padmanabh Alloys & Polymers ranks #489 out of 613 companies in the Chemicals industry, placing it in the top 79.8%.
Is Padmanabh Alloys & Polymers' PEG Ratio too high?
Padmanabh Alloys & Polymers' current PEG Ratio of 6.09 is 52% below median its 10-year median of 12.69. Over the past 10 years, this metric has ranged from a low of 3.16 to a high of 120.66. The Chemicals industry median PEG Ratio is 2.07. Padmanabh Alloys & Polymers' value of 6.09 is 194.2% above this industry median. Based on the distribution chart, Padmanabh Alloys & Polymers ranks #489 out of 613 companies in the Chemicals industry, which is in the bottom quartile relative to peers. Overall, Padmanabh Alloys & Polymers has a GF Score™ of 73/100 and is considered Significantly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Padmanabh Alloys & Polymers' PEG Ratio compare to LIN and SHW?
According to the Chemicals industry distribution chart, Padmanabh Alloys & Polymers ranks #489 out of 613 companies for PEG Ratio. This places Padmanabh Alloys & Polymers in the lower half of its industry. The industry median PEG Ratio is 2.07. Padmanabh Alloys & Polymers' value of 6.09 is 194.2% above this benchmark. Historically, Padmanabh Alloys & Polymers' own PEG Ratio has ranged from 3.16 to 120.66 over the past decade. While the company's 10-year median is 12.69 vs. the industry median of 2.07, Padmanabh Alloys & Polymers has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Chemicals company?
The median PEG Ratio among Chemicals companies is 2.07, based on 613 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Padmanabh Alloys & Polymers's current PEG Ratio of 6.09 is 194.2% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Padmanabh Alloys & Polymers and its competitors. For the Chemicals industry, the median PEG Ratio is 2.07 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Padmanabh Alloys & Polymers's current PEG Ratio is 6.09, which is 52% below median its own 10-year median of 12.69. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Padmanabh Alloys & Polymers stock overvalued right now?
Based on GuruFocus' analysis, Padmanabh Alloys & Polymers (BOM:531779) is currently considered Significantly Undervalued. The stock's GF Value™ is ₹24.63, compared to a current price of ₹13.30 — trading 46% below its estimated fair value. The current PEG Ratio is 6.09, which is 52% below median its 10-year median of 12.69 and 194.2% above the Chemicals industry median of 2.07. Padmanabh Alloys & Polymers' overall GF Score™ is 73/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Padmanabh Alloys & Polymers (BOM:531779), the current PEG Ratio is 6.09 as of Jul. 29, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Padmanabh Alloys & Polymers (BOM:531779) Overvalued in 2026?
Based on GuruFocus' analysis, Padmanabh Alloys & Polymers stock appears to be undervalued.
The current stock price of ₹13.30 is trading 46% below its estimated GF Value™ of ₹24.63.
GuruFocus considers Padmanabh Alloys & Polymers to be Significantly Undervalued.
Key valuation signals for BOM:531779:
PEG Ratio: 6.09 (52% below median its 10-year median of 12.69)
GF Value™: ₹24.63 vs. price of ₹13.30 (46% below fair value)
Industry Position: 194.2% above the Chemicals median (#489 of 613)
No single metric tells the full story. See the BOM:531779 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Padmanabh Alloys & Polymers Ltd manufactures and sells, filled and reinforced thermoplastic compounds and polymer masterbatches. The product portfolio of the company includes. mineral-filled thermoplastic, mineral masterbatches, synthetic paper masterbatches, glass-reinforced thermoplastic, and other specialty masterbatches. The company generates its revenue from local sales as well as merchant export sales.
73GF Score
Get the complete analysis for BOM:531779
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:531779 has been successfully added to your 
