Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
SM Auto StampingBOM:543065 77 PEG Ratio is 0.40 as of Jul. 27, 2026, which is 27% below its 10-year median of 0.55. GuruFocus rates BOM:543065 with a GF Score™ of 77/100 and a GF Value™ of ₹51.21 (Possible Value Trap). The stock has 5 warning signs investors should review. Among 671 Vehicles & Parts companies, SM Auto Stamping ranks better than 82.56% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for SM Auto Stamping's PEG Ratio or its related term are showing as below:
BOM:543065'
s PEG Ratio Range Over the Past 10 Years
Min: 0.37 Med: 0.55 Max: 0.66
Current: 0.4
During the past 10 years, SM Auto Stamping's highest PEG Ratio was 0.66. The lowest was 0.37. And the median was 0.55.
BOM:543065's PEG Ratio is ranked better than 82.56% of 671
companies
in the Vehicles & Parts industry
Industry Median: 1.13
vs BOM:543065: 0.40
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
SM Auto Stamping (BOM:543065) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
SM Auto Stamping PEG Ratio Related Terms
SM Auto Stamping PEG Ratio Historical Data
* Premium members only.
The historical data trend for SM Auto Stamping's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Auto Parts subindustry, SM Auto Stamping's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
SM Auto Stamping PEG Ratio vs Vehicles & Parts Industry
For the Vehicles & Parts industry and Consumer Cyclical sector, SM Auto Stamping's PEG Ratio distribution charts can be found below:
* The bar in red indicates where SM Auto Stamping's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
SM Auto Stamping (BOM:543065) has a PEG Ratio of 0.40 as of Jul. 27, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on SM Auto Stamping and its competitors. This is 27% below median its historical median of 0.55. Over the past decade, SM Auto Stamping's PEG Ratio has ranged from 0.37 to 0.66. According to the industry distribution chart, SM Auto Stamping ranks #117 out of 671 companies in the Vehicles & Parts industry, placing it in the top 17.4%.
Is SM Auto Stamping's PEG Ratio too high?
SM Auto Stamping's current PEG Ratio of 0.40 is 27% below median its 10-year median of 0.55. Over the past 10 years, this metric has ranged from a low of 0.37 to a high of 0.66. The Vehicles & Parts industry median PEG Ratio is 1.13. SM Auto Stamping's value of 0.40 is 64.6% below this industry median. Based on the distribution chart, SM Auto Stamping ranks #117 out of 671 companies in the Vehicles & Parts industry, which is in the top quartile — a strong position relative to peers. Overall, SM Auto Stamping has a GF Score™ of 77/100 and is considered Possible Value Trap, reflecting its overall financial health beyond just this single metric.
How does SM Auto Stamping's PEG Ratio compare to ORLY and AZO?
According to the Vehicles & Parts industry distribution chart, SM Auto Stamping ranks #117 out of 671 companies for PEG Ratio. This places SM Auto Stamping in the top 17% of its industry — outperforming the majority of peers. The industry median PEG Ratio is 1.13. SM Auto Stamping's value of 0.40 is 64.6% below this benchmark. Historically, SM Auto Stamping's own PEG Ratio has ranged from 0.37 to 0.66 over the past decade. While the company's 10-year median is 0.55 vs. the industry median of 1.13, SM Auto Stamping has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Vehicles & Parts company?
The median PEG Ratio among Vehicles & Parts companies is 1.13, based on 671 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. SM Auto Stamping's current PEG Ratio of 0.40 is 64.6% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on SM Auto Stamping and its competitors. For the Vehicles & Parts industry, the median PEG Ratio is 1.13 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. SM Auto Stamping's current PEG Ratio is 0.40, which is 27% below median its own 10-year median of 0.55. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is SM Auto Stamping stock overvalued right now?
Based on GuruFocus' analysis, SM Auto Stamping (BOM:543065) is currently considered Possible Value Trap. The stock's GF Value™ is ₹51.21, compared to a current price of ₹23.36 — trading 54.4% below its estimated fair value. The current PEG Ratio is 0.40, which is 27% below median its 10-year median of 0.55 and 64.6% below the Vehicles & Parts industry median of 1.13. SM Auto Stamping's overall GF Score™ is 77/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For SM Auto Stamping (BOM:543065), the current PEG Ratio is 0.40 as of Jul. 27, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is SM Auto Stamping (BOM:543065) Overvalued in 2026?
Based on GuruFocus' analysis, SM Auto Stamping stock appears to be undervalued.
The current stock price of ₹23.36 is trading 54.4% below its estimated GF Value™ of ₹51.21.
GuruFocus considers SM Auto Stamping to be Possible Value Trap.
Key valuation signals for BOM:543065:
PEG Ratio: 0.40 (27% below median its 10-year median of 0.55)
GF Value™: ₹51.21 vs. price of ₹23.36 (54.4% below fair value)
Industry Position: 64.6% below the Vehicles & Parts median (#117 of 671)
No single metric tells the full story. See the BOM:543065 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
SM Auto Stamping Ltd is an auto-component manufacturer. The company caters to the sheet metal components and sub-assemblies' requirements of automobile parts/equipment manufacturers. Its product portfolio covers sheet metal pressed components for clutches, brakes, engine mountings, chassis, shaft drive, body trims, bearings, among others, which are used in passenger cars, commercial vehicles, and tractors. Its products, such as deep drawn components and control panel components, also find application in the electrical equipment industry.
77GF Score
Get the complete analysis for BOM:543065
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:543065 has been successfully added to your 
