Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Shyam Metalics and Energy's PEG Ratio or its related term are showing as below:
BOM:543299'
s PEG Ratio Range Over the Past 10 Years
Min: 0.11 Med: 1.13 Max: 11.3
Current: 5.93
During the past 10 years, Shyam Metalics and Energy's highest PEG Ratio was 11.30. The lowest was 0.11. And the median was 1.13.
BOM:543299's PEG Ratio is ranked worse than 84% of 200
companies
in the Steel industry
Industry Median: 1.45
vs BOM:543299: 5.93
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Shyam Metalics and Energy (BOM:543299) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Shyam Metalics and Energy PEG Ratio Related Terms
Shyam Metalics and Energy PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Steel subindustry, Shyam Metalics and Energy's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Shyam Metalics and Energy PEG Ratio vs Steel Industry
For the Steel industry and Basic Materials sector, Shyam Metalics and Energy's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Shyam Metalics and Energy's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Shyam Metalics and Energy (BOM:543299) has a PEG Ratio of 5.93 as of Jul. 23, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Shyam Metalics and Energy and its competitors. This is 425% above median its historical median of 1.13. Over the past decade, Shyam Metalics and Energy's PEG Ratio has ranged from 0.11 to 11.30. According to the industry distribution chart, Shyam Metalics and Energy ranks #168 out of 200 companies in the Steel industry, placing it in the top 84%.
Is Shyam Metalics and Energy's PEG Ratio too high?
Shyam Metalics and Energy's current PEG Ratio of 5.93 is 425% above median its 10-year median of 1.13. Over the past 10 years, this metric has ranged from a low of 0.11 to a high of 11.30. The Steel industry median PEG Ratio is 1.45. Shyam Metalics and Energy's value of 5.93 is 309% above this industry median. Based on the distribution chart, Shyam Metalics and Energy ranks #168 out of 200 companies in the Steel industry, which is in the bottom quartile relative to peers. Overall, Shyam Metalics and Energy has a GF Score™ of 87/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Shyam Metalics and Energy's PEG Ratio compare to NUE and STLD?
According to the Steel industry distribution chart, Shyam Metalics and Energy ranks #168 out of 200 companies for PEG Ratio. This places Shyam Metalics and Energy in the lower half of its industry. The industry median PEG Ratio is 1.45. Shyam Metalics and Energy's value of 5.93 is 309% above this benchmark. Historically, Shyam Metalics and Energy's own PEG Ratio has ranged from 0.11 to 11.30 over the past decade. While the company's 10-year median is 1.13 vs. the industry median of 1.45, Shyam Metalics and Energy has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Steel company?
The median PEG Ratio among Steel companies is 1.45, based on 200 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Shyam Metalics and Energy's current PEG Ratio of 5.93 is 309% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Shyam Metalics and Energy and its competitors. For the Steel industry, the median PEG Ratio is 1.45 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Shyam Metalics and Energy's current PEG Ratio is 5.93, which is 425% above median its own 10-year median of 1.13. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Shyam Metalics and Energy stock overvalued right now?
Based on GuruFocus' analysis, Shyam Metalics and Energy (BOM:543299) is currently considered Fairly Valued. The stock's GF Value™ is ₹1,015.73, compared to a current price of ₹1,030.70 — trading 1.5% above its estimated fair value. The current PEG Ratio is 5.93, which is 425% above median its 10-year median of 1.13 and 309% above the Steel industry median of 1.45. Shyam Metalics and Energy's overall GF Score™ is 87/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Shyam Metalics and Energy (BOM:543299), the current PEG Ratio is 5.93 as of Jul. 23, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Shyam Metalics and Energy (BOM:543299) Overvalued in 2026?
Based on GuruFocus' analysis, Shyam Metalics and Energy stock appears to be overvalued.
The current stock price of ₹1,030.70 is trading 1.5% above its estimated GF Value™ of ₹1,015.73.
GuruFocus considers Shyam Metalics and Energy to be Fairly Valued.
Key valuation signals for BOM:543299:
PEG Ratio: 5.93 (425% above median its 10-year median of 1.13)
GF Value™: ₹1,015.73 vs. price of ₹1,030.70 (1.5% above fair value)
Industry Position: 309% above the Steel median (#168 of 200)
No single metric tells the full story. See the BOM:543299 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Shyam Metalics and Energy Ltd is an integrated metal producer company. It is majorly engaged in the production of long steel products such as iron pellets, sponge iron, steel billets, TMT, structural products, wire rods, and ferroalloys. The company generates the majority of its revenue from India. The group revenue from the Sale of Manufactured Products, Sale of Services, Sale of Traded Goods, and Sale of Power, with the majority being generated from the sale of manufactured products. The Company has only one business segment which is iron and steel.
87GF Score
Get the complete analysis for BOM:543299
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:543299 has been successfully added to your 
