Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Al Mahhar Holding Co QPSCDSMD:MHAR 89 PEG Ratio is 0.49 as of Jul. 16, 2026, which is 11% below its 10-year median of 0.55. GuruFocus rates DSMD:MHAR with a GF Score™ of 89/100 and a GF Value™ of ر.ق2.55 (Modestly Undervalued). The stock has 3 warning signs investors should review. Among 1,275 Industrial Products companies, Al Mahhar Holding Co QPSC ranks better than 87.84% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Al Mahhar Holding Co QPSC's PEG Ratio or its related term are showing as below:
DSMD:MHAR'
s PEG Ratio Range Over the Past 10 Years
Min: 0.49 Med: 0.55 Max: 0.58
Current: 0.49
During the past 6 years, Al Mahhar Holding Co QPSC's highest PEG Ratio was 0.58. The lowest was 0.49. And the median was 0.55.
DSMD:MHAR's PEG Ratio is ranked better than 87.84% of 1275
companies
in the Industrial Products industry
Industry Median: 1.82
vs DSMD:MHAR: 0.49
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Al Mahhar Holding Co QPSC (DSMD:MHAR) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Al Mahhar Holding Co QPSC PEG Ratio Related Terms
Al Mahhar Holding Co QPSC PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, Al Mahhar Holding Co QPSC's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Al Mahhar Holding Co QPSC PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Al Mahhar Holding Co QPSC's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Al Mahhar Holding Co QPSC's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Al Mahhar Holding Co QPSC (DSMD:MHAR) has a PEG Ratio of 0.49 as of Jul. 16, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Al Mahhar Holding Co QPSC and its competitors. This is 11% below median its historical median of 0.55. Over the past decade, Al Mahhar Holding Co QPSC's PEG Ratio has ranged from 0.49 to 0.58. According to the industry distribution chart, Al Mahhar Holding Co QPSC ranks #155 out of 1275 companies in the Industrial Products industry, placing it in the top 12.2%.
Is Al Mahhar Holding Co QPSC's PEG Ratio too high?
Al Mahhar Holding Co QPSC's current PEG Ratio of 0.49 is 11% below median its 10-year median of 0.55. Over the past 10 years, this metric has ranged from a low of 0.49 to a high of 0.58. The Industrial Products industry median PEG Ratio is 1.82. Al Mahhar Holding Co QPSC's value of 0.49 is 73.1% below this industry median. Based on the distribution chart, Al Mahhar Holding Co QPSC ranks #155 out of 1275 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Al Mahhar Holding Co QPSC has a GF Score™ of 89/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Al Mahhar Holding Co QPSC's PEG Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Al Mahhar Holding Co QPSC ranks #155 out of 1275 companies for PEG Ratio. This places Al Mahhar Holding Co QPSC in the top 12% of its industry — outperforming the majority of peers. The industry median PEG Ratio is 1.82. Al Mahhar Holding Co QPSC's value of 0.49 is 73.1% below this benchmark. Historically, Al Mahhar Holding Co QPSC's own PEG Ratio has ranged from 0.49 to 0.58 over the past decade. While the company's 10-year median is 0.55 vs. the industry median of 1.82, Al Mahhar Holding Co QPSC has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.82, based on 1,275 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Al Mahhar Holding Co QPSC's current PEG Ratio of 0.49 is 73.1% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Al Mahhar Holding Co QPSC and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.82 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Al Mahhar Holding Co QPSC's current PEG Ratio is 0.49, which is 11% below median its own 10-year median of 0.55. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Al Mahhar Holding Co QPSC stock overvalued right now?
Based on GuruFocus' analysis, Al Mahhar Holding Co QPSC (DSMD:MHAR) is currently considered Modestly Undervalued. The stock's GF Value™ is ر.ق2.55, compared to a current price of ر.ق2.12 — trading 17% below its estimated fair value. The current PEG Ratio is 0.49, which is 11% below median its 10-year median of 0.55 and 73.1% below the Industrial Products industry median of 1.82. Al Mahhar Holding Co QPSC's overall GF Score™ is 89/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Al Mahhar Holding Co QPSC (DSMD:MHAR), the current PEG Ratio is 0.49 as of Jul. 16, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Al Mahhar Holding Co QPSC (DSMD:MHAR) Overvalued in 2026?
Based on GuruFocus' analysis, Al Mahhar Holding Co QPSC stock appears to be undervalued.
The current stock price of ر.ق2.12 is trading 17% below its estimated GF Value™ of ر.ق2.55.
GuruFocus considers Al Mahhar Holding Co QPSC to be Modestly Undervalued.
Key valuation signals for DSMD:MHAR:
PEG Ratio: 0.49 (11% below median its 10-year median of 0.55)
GF Value™: ر.ق2.55 vs. price of ر.ق2.12 (17% below fair value)
Industry Position: 73.1% below the Industrial Products median (#155 of 1275)
No single metric tells the full story. See the DSMD:MHAR stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Al Mahhar Holding Co QPSC is a Qatari-based group focused on the energy and infrastructure sectors. Along with its subsidiaries, the company operates in the following reportable segments: Energy Sector and Infrastructure Sector. Maximum revenue is generated from its Energy sector segment, which is engaged in marketing and sale of various products and services related to the oil and gas industry. The Infrastructure sector segment is engaged in trading and rental of industrial construction equipment and other related services. Geographically, the company generates a majority of its revenue from Qatar and the rest from other regions.
89GF Score
Get the complete analysis for DSMD:MHAR
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
DSMD:MHAR has been successfully added to your 
