Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Standex International's PEG Ratio or its related term are showing as below:
FRA:9SI'
s PEG Ratio Range Over the Past 10 Years
Min: 1.27 Med: 3.99 Max: 99.73
Current: 4.58
During the past 13 years, Standex International's highest PEG Ratio was 99.73. The lowest was 1.27. And the median was 3.99.
FRA:9SI's PEG Ratio is ranked worse than 78.07% of 1277
companies
in the Industrial Products industry
Industry Median: 1.8
vs FRA:9SI: 4.58
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Standex International (FRA:9SI) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, Standex International's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Standex International PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Standex International's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Standex International's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Standex International (FRA:9SI) has a PEG Ratio of 4.46 as of Jul. 22, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Standex International and its competitors. This is 12% above median its historical median of 3.99. Over the past decade, Standex International's PEG Ratio has ranged from 1.27 to 99.73. According to the industry distribution chart, Standex International ranks #997 out of 1277 companies in the Industrial Products industry, placing it in the top 78.1%.
Is Standex International's PEG Ratio too high?
Standex International's current PEG Ratio of 4.46 is 12% above median its 10-year median of 3.99. Over the past 10 years, this metric has ranged from a low of 1.27 to a high of 99.73. The Industrial Products industry median PEG Ratio is 1.80. Standex International's value of 4.46 is 147.8% above this industry median. Based on the distribution chart, Standex International ranks #997 out of 1277 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Standex International has a GF Score™ of 82/100, reflecting its overall financial health beyond just this single metric.
How does Standex International's PEG Ratio compare to MWA and KAI?
According to the Industrial Products industry distribution chart, Standex International ranks #997 out of 1277 companies for PEG Ratio. This places Standex International in the lower half of its industry. The industry median PEG Ratio is 1.80. Standex International's value of 4.46 is 147.8% above this benchmark. Historically, Standex International's own PEG Ratio has ranged from 1.27 to 99.73 over the past decade. While the company's 10-year median is 3.99 vs. the industry median of 1.80, Standex International has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.80, based on 1,277 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Standex International's current PEG Ratio of 4.46 is 147.8% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Standex International and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.80 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Standex International's current PEG Ratio is 4.46, which is 12% above median its own 10-year median of 3.99. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Standex International stock overvalued right now?
Standex International (FRA:9SI) has a current PEG Ratio of 4.46. The stock's GF Value™ is €177.89, compared to a current price of €258.00 — trading 45% above its estimated fair value. The current PEG Ratio is 4.46, which is 12% above median its 10-year median of 3.99 and 147.8% above the Industrial Products industry median of 1.80. Standex International's overall GF Score™ is 82/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Standex International (FRA:9SI), the current PEG Ratio is 4.46 as of Jul. 22, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Standex International (FRA:9SI) Overvalued in 2026?
Based on GuruFocus' analysis, Standex International stock appears to be overvalued.
The current stock price of €258.00 is trading 45% above its estimated GF Value™ of €177.89.
Key valuation signals for FRA:9SI:
PEG Ratio: 4.46 (12% above median its 10-year median of 3.99)
GF Value™: €177.89 vs. price of €258.00 (45% above fair value)
Industry Position: 147.8% above the Industrial Products median (#997 of 1277)
No single metric tells the full story. See the FRA:9SI stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Standex International Corp is an industrial manufacturer of different products and services used in commercial and industrial markets. The company has five reportable segments: Electronics, Engraving, Scientific, Engineering Technologies, and Specialty Solutions. The maximum revenue is generated from its Electronics segment, which is a component and value-added services provider of both sensing and switching technologies, as well as magnetic power conversion components and assemblies, like custom wound transformers and inductors, current sense technology, value-added assemblies, and mechanical packaging, among others. Geographically, it derives key revenue from the United States and the rest from the Asia Pacific, Europe, the Middle East, and Africa (EMEA), as well as other regions.
82GF Score
Get the complete analysis for FRA:9SI
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
FRA:9SI has been successfully added to your 
