Jacquet MetalsJQTMF 79 PEG Ratio is 15.57 as of Jul. 02, 2026, which is 3607% above its 10-year median of 0.42. GuruFocus rates JQTMF with a GF Score™ of 79/100 and a GF Value™ of $9.69. The stock has 5 warning signs investors should review. Among 200 Steel companies, Jacquet Metals ranks worse than 97% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Jacquet Metals's PEG Ratio or its related term are showing as below:
JQTMF'
s PEG Ratio Range Over the Past 10 Years
Min: 0.08 Med: 0.42 Max: 35.32
Current: 30.53
During the past 13 years, Jacquet Metals's highest PEG Ratio was 35.32. The lowest was 0.08. And the median was 0.42.
JQTMF's PEG Ratio is ranked worse than 97% of 200
companies
in the Steel industry
Industry Median: 1.425
vs JQTMF: 30.53
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Jacquet Metals (OTCPK:JQTMF) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Jacquet Metals PEG Ratio Related Terms
Jacquet Metals PEG Ratio Historical Data
* Premium members only.
The historical data trend for Jacquet Metals's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Steel subindustry, Jacquet Metals's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Jacquet Metals PEG Ratio vs Steel Industry
For the Steel industry and Basic Materials sector, Jacquet Metals's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Jacquet Metals's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Jacquet Metals (JQTMF) has a PEG Ratio of 15.57 as of Jul. 02, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Jacquet Metals and its competitors. This is 3607% above median its historical median of 0.42. Over the past decade, Jacquet Metals' PEG Ratio has ranged from 0.08 to 35.32. According to the industry distribution chart, Jacquet Metals ranks #194 out of 200 companies in the Steel industry, placing it in the top 97%.
Is Jacquet Metals' PEG Ratio too high?
Jacquet Metals' current PEG Ratio of 15.57 is 3607% above median its 10-year median of 0.42. Over the past 10 years, this metric has ranged from a low of 0.08 to a high of 35.32. The Steel industry median PEG Ratio is 1.43. Jacquet Metals' value of 15.57 is 992.6% above this industry median. Based on the distribution chart, Jacquet Metals ranks #194 out of 200 companies in the Steel industry, which is in the bottom quartile relative to peers. Overall, Jacquet Metals has a GF Score™ of 79/100, reflecting its overall financial health beyond just this single metric.
How does Jacquet Metals' PEG Ratio compare to NUE and STLD?
According to the Steel industry distribution chart, Jacquet Metals ranks #194 out of 200 companies for PEG Ratio. This places Jacquet Metals in the lower half of its industry. The industry median PEG Ratio is 1.43. Jacquet Metals' value of 15.57 is 992.6% above this benchmark. Historically, Jacquet Metals' own PEG Ratio has ranged from 0.08 to 35.32 over the past decade. While the company's 10-year median is 0.42 vs. the industry median of 1.43, Jacquet Metals has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Steel company?
The median PEG Ratio among Steel companies is 1.43, based on 200 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Jacquet Metals's current PEG Ratio of 15.57 is 992.6% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Jacquet Metals and its competitors. For the Steel industry, the median PEG Ratio is 1.43 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Jacquet Metals's current PEG Ratio is 15.57, which is 3607% above median its own 10-year median of 0.42. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Jacquet Metals stock overvalued right now?
Jacquet Metals (JQTMF) has a current PEG Ratio of 15.57. The stock's GF Value™ is $9.69, compared to a current price of $12.53 — trading 29.3% above its estimated fair value. The current PEG Ratio is 15.57, which is 3607% above median its 10-year median of 0.42 and 992.6% above the Steel industry median of 1.43. Jacquet Metals' overall GF Score™ is 79/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Jacquet Metals (JQTMF), the current PEG Ratio is 15.57 as of Jul. 02, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Jacquet Metals (JQTMF) Overvalued in 2026?
Based on GuruFocus' analysis, Jacquet Metals stock appears to be overvalued.
The current stock price of $12.53 is trading 29.3% above its estimated GF Value™ of $9.69.
Key valuation signals for JQTMF:
PEG Ratio: 15.57 (3607% above median its 10-year median of 0.42)
GF Value™: $9.69 vs. price of $12.53 (29.3% above fair value)
Industry Position: 992.6% above the Steel median (#194 of 200)
No single metric tells the full story. See the JQTMF stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Jacquet Metals is engaged in the business of distributing special steels in China and India. The product lines consist of Jacquet, which involves Quarto stainless steel sheets and nickel alloys; Stappert, consists of long products in stainless steels and IMS Group. The products are used in agro-food, energy, chemicals and petrochemicals, paper industry, mines and quarries, public works, steel, shipbuilding, agricultural equipment, general mechanics, recycling, desalination of seawater for agriculture, wastewater treatment purposes.
79GF Score
Get the complete analysis for JQTMF
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
JQTMF has been successfully added to your 
