Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Pittler Maschinenfabrik AGLTS:0FME 69 PEG Ratio is 0.29 as of Aug. 03, 2026, which is 32% above its 10-year median of 0.22. GuruFocus rates LTS:0FME with a GF Score™ of 69/100 and a GF Value™ of €1.65. The stock has 4 warning signs investors should review. Among 1,280 Industrial Products companies, Pittler Maschinenfabrik AG ranks better than 91.8% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Pittler Maschinenfabrik AG's PEG Ratio or its related term are showing as below:
LTS:0FME'
s PEG Ratio Range Over the Past 10 Years
Min: 0.09 Med: 0.22 Max: 12.01
Current: 0.37
During the past 13 years, Pittler Maschinenfabrik AG's highest PEG Ratio was 12.01. The lowest was 0.09. And the median was 0.22.
LTS:0FME's PEG Ratio is ranked better than 91.8% of 1280
companies
in the Industrial Products industry
Industry Median: 1.75
vs LTS:0FME: 0.37
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Pittler Maschinenfabrik AG (LTS:0FME) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Pittler Maschinenfabrik AG PEG Ratio Related Terms
Pittler Maschinenfabrik AG PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, Pittler Maschinenfabrik AG's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Pittler Maschinenfabrik AG PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Pittler Maschinenfabrik AG's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Pittler Maschinenfabrik AG's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Pittler Maschinenfabrik AG (LTS:0FME) has a PEG Ratio of 0.29 as of Aug. 03, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Pittler Maschinenfabrik AG and its competitors. This is 32% above median its historical median of 0.22. Over the past decade, Pittler Maschinenfabrik AG's PEG Ratio has ranged from 0.09 to 12.01. According to the industry distribution chart, Pittler Maschinenfabrik AG ranks #105 out of 1280 companies in the Industrial Products industry, placing it in the top 8.2%.
Is Pittler Maschinenfabrik AG's PEG Ratio too high?
Pittler Maschinenfabrik AG's current PEG Ratio of 0.29 is 32% above median its 10-year median of 0.22. Over the past 10 years, this metric has ranged from a low of 0.09 to a high of 12.01. The Industrial Products industry median PEG Ratio is 1.75. Pittler Maschinenfabrik AG's value of 0.29 is 83.4% below this industry median. Based on the distribution chart, Pittler Maschinenfabrik AG ranks #105 out of 1280 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Pittler Maschinenfabrik AG has a GF Score™ of 69/100, reflecting its overall financial health beyond just this single metric.
How does Pittler Maschinenfabrik AG's PEG Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Pittler Maschinenfabrik AG ranks #105 out of 1280 companies for PEG Ratio. This places Pittler Maschinenfabrik AG in the top 8% of its industry — outperforming the majority of peers. The industry median PEG Ratio is 1.75. Pittler Maschinenfabrik AG's value of 0.29 is 83.4% below this benchmark. Historically, Pittler Maschinenfabrik AG's own PEG Ratio has ranged from 0.09 to 12.01 over the past decade. While the company's 10-year median is 0.22 vs. the industry median of 1.75, Pittler Maschinenfabrik AG has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.75, based on 1,280 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Pittler Maschinenfabrik AG's current PEG Ratio of 0.29 is 83.4% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Pittler Maschinenfabrik AG and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.75 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Pittler Maschinenfabrik AG's current PEG Ratio is 0.29, which is 32% above median its own 10-year median of 0.22. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Pittler Maschinenfabrik AG stock overvalued right now?
Pittler Maschinenfabrik AG (LTS:0FME) has a current PEG Ratio of 0.29. The stock's GF Value™ is €1.65, compared to a current price of €1.33 — trading 19.4% below its estimated fair value. The current PEG Ratio is 0.29, which is 32% above median its 10-year median of 0.22 and 83.4% below the Industrial Products industry median of 1.75. Pittler Maschinenfabrik AG's overall GF Score™ is 69/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Pittler Maschinenfabrik AG (LTS:0FME), the current PEG Ratio is 0.29 as of Aug. 03, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Pittler Maschinenfabrik AG (LTS:0FME) Overvalued in 2026?
Based on GuruFocus' analysis, Pittler Maschinenfabrik AG stock appears to be undervalued.
The current stock price of €1.33 is trading 19.4% below its estimated GF Value™ of €1.65.
Key valuation signals for LTS:0FME:
PEG Ratio: 0.29 (32% above median its 10-year median of 0.22)
GF Value™: €1.65 vs. price of €1.33 (19.4% below fair value)
Industry Position: 83.4% below the Industrial Products median (#105 of 1280)
No single metric tells the full story. See the LTS:0FME stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
LTS:0FME has been successfully added to your 
