Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
DMG Mori AGLTS:0OP0 64 PEG Ratio is 466.83 as of Aug. 04, 2026, which is 4152% above its 10-year median of 10.98. GuruFocus rates LTS:0OP0 with a GF Score™ of 64/100 and a GF Value™ of €37.24 (Modestly Overvalued). The stock has 4 warning signs investors should review. Among 1,280 Industrial Products companies, DMG Mori AG ranks worse than 99.92% on this metric.
PE Ratio without NRI / 5-Year EBITDA Growth Rate*
PEG Ratio is defined as the PE Ratio without NRI divided by the growth ratio. The growth rate we use is the 5-Year EBITDA growth rate. As of today, DMG Mori AG's PE Ratio without NRI is 4,715.00. DMG Mori AG's 5-Year EBITDA growth rate is 10.10%. Therefore, DMG Mori AG's PEG Ratio for today is 466.83.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for DMG Mori AG's PEG Ratio or its related term are showing as below:
LTS:0OP0'
s PEG Ratio Range Over the Past 10 Years
Min: 1.35 Med: 10.98 Max: 808.39
Current: 464.36
During the past 13 years, DMG Mori AG's highest PEG Ratio was 808.39. The lowest was 1.35. And the median was 10.98.
LTS:0OP0's PEG Ratio is ranked worse than 99.92% of 1280
companies
in the Industrial Products industry
Industry Median: 1.77
vs LTS:0OP0: 464.36
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
DMG Mori AG PEG Ratio Related Terms
DMG Mori AG PEG Ratio Historical Data
* Premium members only.
The historical data trend for DMG Mori AG's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Tools & Accessories subindustry, DMG Mori AG's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
DMG Mori AG PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, DMG Mori AG's PEG Ratio distribution charts can be found below:
* The bar in red indicates where DMG Mori AG's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
DMG Mori AG (LTS:0OP0) has a PEG Ratio of 466.83 as of Aug. 04, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on DMG Mori AG and its competitors. This is 4152% above median its historical median of 10.98. Over the past decade, DMG Mori AG's PEG Ratio has ranged from 1.35 to 808.39. According to the industry distribution chart, DMG Mori AG ranks #1279 out of 1280 companies in the Industrial Products industry, placing it in the top 99.9%.
Is DMG Mori AG's PEG Ratio too high?
DMG Mori AG's current PEG Ratio of 466.83 is 4152% above median its 10-year median of 10.98. Over the past 10 years, this metric has ranged from a low of 1.35 to a high of 808.39. The Industrial Products industry median PEG Ratio is 1.77. DMG Mori AG's value of 466.83 is 26274.6% above this industry median. Based on the distribution chart, DMG Mori AG ranks #1279 out of 1280 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, DMG Mori AG has a GF Score™ of 64/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does DMG Mori AG's PEG Ratio compare to SNA and RBC?
According to the Industrial Products industry distribution chart, DMG Mori AG ranks #1279 out of 1280 companies for PEG Ratio. This places DMG Mori AG in the lower half of its industry. The industry median PEG Ratio is 1.77. DMG Mori AG's value of 466.83 is 26274.6% above this benchmark. Historically, DMG Mori AG's own PEG Ratio has ranged from 1.35 to 808.39 over the past decade. While the company's 10-year median is 10.98 vs. the industry median of 1.77, DMG Mori AG has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.77, based on 1,280 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. DMG Mori AG's current PEG Ratio of 466.83 is 26274.6% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on DMG Mori AG and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.77 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. DMG Mori AG's current PEG Ratio is 466.83, which is 4152% above median its own 10-year median of 10.98. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is DMG Mori AG stock overvalued right now?
Based on GuruFocus' analysis, DMG Mori AG (LTS:0OP0) is currently considered Modestly Overvalued. The stock's GF Value™ is €37.24, compared to a current price of €47.15 — trading 26.6% above its estimated fair value. The current PEG Ratio is 466.83, which is 4152% above median its 10-year median of 10.98 and 26274.6% above the Industrial Products industry median of 1.77. DMG Mori AG's overall GF Score™ is 64/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For DMG Mori AG (LTS:0OP0), the current PEG Ratio is 466.83 as of Aug. 04, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is DMG Mori AG (LTS:0OP0) Overvalued in 2026?
Based on GuruFocus' analysis, DMG Mori AG stock appears to be overvalued.
The current stock price of €47.15 is trading 26.6% above its estimated GF Value™ of €37.24.
GuruFocus considers DMG Mori AG to be Modestly Overvalued.
Key valuation signals for LTS:0OP0:
PEG Ratio: 466.83 (4152% above median its 10-year median of 10.98)
GF Value™: €37.24 vs. price of €47.15 (26.6% above fair value)
Industry Position: 26274.6% above the Industrial Products median (#1279 of 1280)
No single metric tells the full story. See the LTS:0OP0 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
DMG Mori AG is a manufacturer of turning centers, machining centers, mill-turn centers, grinding and drilling machines, and process automation. The company operates three business segments: machine tools, industrial services, and corporate services. The machine tools segment includes turning and milling companies that produce lathes and milling machines, technologies, and software solutions. Industrial solutions include the entire machine life cycle services. The end markets are Germany, the rest of Europe, and Asia. The company earns maximum sales revenue from the machine tools segment.
64GF Score
Get the complete analysis for LTS:0OP0
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
LTS:0OP0 has been successfully added to your 
