* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Maruichi Steel Tube's PEG Ratio or its related term are showing as below:
MCHIF'
s PEG Ratio Range Over the Past 10 Years
Min: 0.33 Med: 1.89 Max: 17.62
Current: 1.49
During the past 13 years, Maruichi Steel Tube's highest PEG Ratio was 17.62. The lowest was 0.33. And the median was 1.89.
MCHIF's PEG Ratio is ranked worse than 54.73% of 201
companies
in the Steel industry
Industry Median: 1.41
vs MCHIF: 1.49
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Maruichi Steel Tube (OTCPK:MCHIF) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Maruichi Steel Tube PEG Ratio Related Terms
Maruichi Steel Tube PEG Ratio Historical Data
* Premium members only.
The historical data trend for Maruichi Steel Tube's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Steel subindustry, Maruichi Steel Tube's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Maruichi Steel Tube PEG Ratio vs Steel Industry
For the Steel industry and Basic Materials sector, Maruichi Steel Tube's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Maruichi Steel Tube's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Maruichi Steel Tube (MCHIF) has a PEG Ratio of 0.97 as of Jul. 01, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Maruichi Steel Tube and its competitors. This is 49% below median its historical median of 1.89. Over the past decade, Maruichi Steel Tube's PEG Ratio has ranged from 0.33 to 17.62. According to the industry distribution chart, Maruichi Steel Tube ranks #110 out of 201 companies in the Steel industry, placing it in the top 54.7%.
Is Maruichi Steel Tube's PEG Ratio too high?
Maruichi Steel Tube's current PEG Ratio of 0.97 is 49% below median its 10-year median of 1.89. Over the past 10 years, this metric has ranged from a low of 0.33 to a high of 17.62. The Steel industry median PEG Ratio is 1.41. Maruichi Steel Tube's value of 0.97 is 31.2% below this industry median. Based on the distribution chart, Maruichi Steel Tube ranks #110 out of 201 companies in the Steel industry, which is below the industry midpoint. Overall, Maruichi Steel Tube has a GF Score™ of 85/100, reflecting its overall financial health beyond just this single metric.
How does Maruichi Steel Tube's PEG Ratio compare to NUE and STLD?
According to the Steel industry distribution chart, Maruichi Steel Tube ranks #110 out of 201 companies for PEG Ratio. This places Maruichi Steel Tube in the lower half of its industry. The industry median PEG Ratio is 1.41. Maruichi Steel Tube's value of 0.97 is 31.2% below this benchmark. Historically, Maruichi Steel Tube's own PEG Ratio has ranged from 0.33 to 17.62 over the past decade. While the company's 10-year median is 1.89 vs. the industry median of 1.41, Maruichi Steel Tube has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Steel company?
The median PEG Ratio among Steel companies is 1.41, based on 201 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Maruichi Steel Tube's current PEG Ratio of 0.97 is 31.2% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Maruichi Steel Tube and its competitors. For the Steel industry, the median PEG Ratio is 1.41 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Maruichi Steel Tube's current PEG Ratio is 0.97, which is 49% below median its own 10-year median of 1.89. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Maruichi Steel Tube stock overvalued right now?
Maruichi Steel Tube (MCHIF) has a current PEG Ratio of 0.97. The stock's GF Value™ is $5.12, compared to a current price of $7.31 — trading 42.8% above its estimated fair value. The current PEG Ratio is 0.97, which is 49% below median its 10-year median of 1.89 and 31.2% below the Steel industry median of 1.41. Maruichi Steel Tube's overall GF Score™ is 85/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Maruichi Steel Tube (MCHIF), the current PEG Ratio is 0.97 as of Jul. 01, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Maruichi Steel Tube (MCHIF) Overvalued in 2026?
Based on GuruFocus' analysis, Maruichi Steel Tube stock appears to be overvalued.
The current stock price of $7.31 is trading 42.8% above its estimated GF Value™ of $5.12.
Key valuation signals for MCHIF:
PEG Ratio: 0.97 (49% below median its 10-year median of 1.89)
GF Value™: $5.12 vs. price of $7.31 (42.8% above fair value)
Industry Position: 31.2% below the Steel median (#110 of 201)
No single metric tells the full story. See the MCHIF stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Maruichi Steel Tube Ltd is a Japan-based company that manufactures and sells steel tubes and steel sheet coating. The company's product portfolio includes welded steel tubes, hot-dip galvanized steel sheet, lighting poles, and prepainted steel sheet. Its products are used in architecture, civil engineering, machinery, power generation plants, automobiles, motorcycles, medical equipment, fitness machines, office automation equipment, office and educational furniture, and others.
85GF Score
Get the complete analysis for MCHIF
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
MCHIF has been successfully added to your 
