Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Mitsubishi MaterialsMIMTF +32.78%68 PEG Ratio is 0.02 as of Aug. 06, 2026, which is 98% below its 10-year median of 0.94. GuruFocus rates MIMTF with a GF Score™ of 68/100 and a GF Value™ of $14,079.18 (Possible Value Trap). The stock has 5 warning signs investors should review. Among 313 Metals & Mining companies, Mitsubishi Materials ranks worse than 319488.5% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Mitsubishi Materials's PEG Ratio or its related term are showing as below:
MIMTF'
s PEG Ratio Range Over the Past 10 Years
Min: 0.02 Med: 0.94 Max: 3.32
Current: 0.02
During the past 13 years, Mitsubishi Materials's highest PEG Ratio was 3.32. The lowest was 0.02. And the median was 0.94.
MIMTF's PEG Ratio is not ranked
in the Metals & Mining industry.
Industry Median: 1.28
vs MIMTF: 0.02
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Mitsubishi Materials (OTCPK:MIMTF) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Mitsubishi Materials PEG Ratio Related Terms
Mitsubishi Materials PEG Ratio Historical Data
* Premium members only.
The historical data trend for Mitsubishi Materials's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Mitsubishi Materials PEG Ratio Competitor Comparison
For the Other Industrial Metals & Mining subindustry, Mitsubishi Materials's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Mitsubishi Materials PEG Ratio vs Metals & Mining Industry
For the Metals & Mining industry and Basic Materials sector, Mitsubishi Materials's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Mitsubishi Materials's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Mitsubishi Materials (MIMTF) has a PEG Ratio of 0.02 as of Aug. 06, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Mitsubishi Materials and its competitors. This is 98% below median its historical median of 0.94. Over the past decade, Mitsubishi Materials' PEG Ratio has ranged from 0.02 to 3.32. According to the industry distribution chart, Mitsubishi Materials ranks #999999 out of 313 companies in the Metals & Mining industry.
Is Mitsubishi Materials' PEG Ratio too high?
Mitsubishi Materials' current PEG Ratio of 0.02 is 98% below median its 10-year median of 0.94. Over the past 10 years, this metric has ranged from a low of 0.02 to a high of 3.32. The Metals & Mining industry median PEG Ratio is 1.28. Mitsubishi Materials' value of 0.02 is 98.4% below this industry median. Based on the distribution chart, Mitsubishi Materials ranks #999999 out of 313 companies in the Metals & Mining industry, which is in the bottom quartile relative to peers. Overall, Mitsubishi Materials has a GF Score™ of 68/100 and is considered Possible Value Trap, reflecting its overall financial health beyond just this single metric.
How does Mitsubishi Materials' PEG Ratio compare to competitors?
According to the Metals & Mining industry distribution chart, Mitsubishi Materials ranks #999999 out of 313 companies for PEG Ratio. This places Mitsubishi Materials in the lower half of its industry. The industry median PEG Ratio is 1.28. Mitsubishi Materials' value of 0.02 is 98.4% below this benchmark. Historically, Mitsubishi Materials' own PEG Ratio has ranged from 0.02 to 3.32 over the past decade. While the company's 10-year median is 0.94 vs. the industry median of 1.28, Mitsubishi Materials has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Metals & Mining company?
The median PEG Ratio among Metals & Mining companies is 1.28, based on 313 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Mitsubishi Materials's current PEG Ratio of 0.02 is 98.4% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Mitsubishi Materials and its competitors. For the Metals & Mining industry, the median PEG Ratio is 1.28 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Mitsubishi Materials's current PEG Ratio is 0.02, which is 98% below median its own 10-year median of 0.94. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Mitsubishi Materials stock overvalued right now?
Based on GuruFocus' analysis, Mitsubishi Materials (MIMTF) is currently considered Possible Value Trap. The stock's GF Value™ is $14,079.18, compared to a current price of $32.00 — trading 99.8% below its estimated fair value. The current PEG Ratio is 0.02, which is 98% below median its 10-year median of 0.94 and 98.4% below the Metals & Mining industry median of 1.28. Mitsubishi Materials' overall GF Score™ is 68/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Mitsubishi Materials (MIMTF), the current PEG Ratio is 0.02 as of Aug. 06, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Mitsubishi Materials (MIMTF) Overvalued in 2026?
Based on GuruFocus' analysis, Mitsubishi Materials stock appears to be undervalued.
The current stock price of $32.00 is trading 99.8% below its estimated GF Value™ of $14,079.18.
GuruFocus considers Mitsubishi Materials to be Possible Value Trap.
Key valuation signals for MIMTF:
PEG Ratio: 0.02 (98% below median its 10-year median of 0.94)
GF Value™: $14,079.18 vs. price of $32.00 (99.8% below fair value)
Industry Position: 98.4% below the Metals & Mining median (#999999 of 313)
No single metric tells the full story. See the MIMTF stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Mitsubishi Materials Corp is a Japan-based company engaged in the production of processed copper products, electronic materials, and cemented carbide products, as well as the smelting and sale of metals such as copper, gold, silver, and palladium. The company operates through four segments. The Highly Functional Products segment includes processed copper products and electronic materials. The Metal segment is engaged in the smelting and refining of non-ferrous metals, including copper, gold, silver, lead, tin, and palladium, as well as the recycling of home appliances. The Processing segment covers carbide products, while the Renewable Energy segment focuses on renewable energy operations. The Other segment includes cement-related and engineering-related businesses.
68GF Score
Get the complete analysis for MIMTF
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
MIMTF has been successfully added to your 
