MitsuiMITSY +3.24%82 PEG Ratio is 1.02 as of Jun. 28, 2026, which is 122% above its 10-year median of 0.46. GuruFocus rates MITSY with a GF Score™ of 82/100 and a GF Value™ of $419.02 (Significantly Overvalued). The stock has 9 warning signs investors should review. Among 262 Conglomerates companies, Mitsui ranks worse than 51.53% on this metric.
PE Ratio without NRI / 5-Year EBITDA Growth Rate*
PEG Ratio is defined as the PE Ratio without NRI divided by the growth ratio. The growth rate we use is the 5-Year EBITDA growth rate. As of today, Mitsui's PE Ratio without NRI is 15.95. Mitsui's 5-Year EBITDA growth rate is 15.60%. Therefore, Mitsui's PEG Ratio for today is 1.02.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Mitsui's PEG Ratio or its related term are showing as below:
MITSY'
s PEG Ratio Range Over the Past 10 Years
Min: 0.27 Med: 0.46 Max: 2.19
Current: 1.08
During the past 13 years, Mitsui's highest PEG Ratio was 2.19. The lowest was 0.27. And the median was 0.46.
MITSY's PEG Ratio is ranked worse than 51.53% of 262
companies
in the Conglomerates industry
Industry Median: 1.05
vs MITSY: 1.08
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Mitsui (OTCPK:MITSY) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Mitsui PEG Ratio Related Terms
Mitsui PEG Ratio Historical Data
* Premium members only.
The historical data trend for Mitsui's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Conglomerates subindustry, Mitsui's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Mitsui PEG Ratio vs Conglomerates Industry
For the Conglomerates industry and Industrials sector, Mitsui's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Mitsui's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Mitsui (MITSY) has a PEG Ratio of 1.02 as of Jun. 28, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Mitsui and its competitors. This is 122% above median its historical median of 0.46. Over the past decade, Mitsui's PEG Ratio has ranged from 0.27 to 2.19. According to the industry distribution chart, Mitsui ranks #135 out of 262 companies in the Conglomerates industry, placing it in the top 51.5%.
Is Mitsui's PEG Ratio too high?
Mitsui's current PEG Ratio of 1.02 is 122% above median its 10-year median of 0.46. Over the past 10 years, this metric has ranged from a low of 0.27 to a high of 2.19. The Conglomerates industry median PEG Ratio is 1.05. Mitsui's value of 1.02 is 2.9% below this industry median. Based on the distribution chart, Mitsui ranks #135 out of 262 companies in the Conglomerates industry, which is below the industry midpoint. Overall, Mitsui has a GF Score™ of 82/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Mitsui's PEG Ratio compare to HON and MMM?
According to the Conglomerates industry distribution chart, Mitsui ranks #135 out of 262 companies for PEG Ratio. This places Mitsui in the lower half of its industry. The industry median PEG Ratio is 1.05. Mitsui's value of 1.02 is 2.9% below this benchmark. Historically, Mitsui's own PEG Ratio has ranged from 0.27 to 2.19 over the past decade. While the company's 10-year median is 0.46 vs. the industry median of 1.05, Mitsui has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Conglomerates company?
The median PEG Ratio among Conglomerates companies is 1.05, based on 262 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Mitsui's current PEG Ratio of 1.02 is 2.9% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Mitsui and its competitors. For the Conglomerates industry, the median PEG Ratio is 1.05 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Mitsui's current PEG Ratio is 1.02, which is 122% above median its own 10-year median of 0.46. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Mitsui stock overvalued right now?
Based on GuruFocus' analysis, Mitsui (MITSY) is currently considered Significantly Overvalued. The stock's GF Value™ is $419.02, compared to a current price of $564.20 — trading 34.6% above its estimated fair value. The current PEG Ratio is 1.02, which is 122% above median its 10-year median of 0.46 and 2.9% below the Conglomerates industry median of 1.05. Mitsui's overall GF Score™ is 82/100 with 9 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Mitsui (MITSY), the current PEG Ratio is 1.02 as of Jun. 28, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Mitsui (MITSY) Overvalued in 2026?
Based on GuruFocus' analysis, Mitsui stock appears to be overvalued.
The current stock price of $564.20 is trading 34.6% above its estimated GF Value™ of $419.02.
GuruFocus considers Mitsui to be Significantly Overvalued.
Key valuation signals for MITSY:
PEG Ratio: 1.02 (122% above median its 10-year median of 0.46)
GF Value™: $419.02 vs. price of $564.20 (34.6% above fair value)
Industry Position: 2.9% below the Conglomerates median (#135 of 262)
No single metric tells the full story. See the MITSY stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Mitsui is a general trading house, or sogo shosha, a type of conglomerate unique to Japan. Its core role is that of a trading intermediary in a variety of industrial sectors, including resources businesses like energy and metals as well as nonresources businesses, both industrial ones like machinery and nonindustrial ones like food, healthcare, and retail. In addition to acting as a trading intermediary (including midstream processing functions to convert inputs into final products), Mitsui participates in upstream production businesses and downstream distribution businesses. Among Japan's large trading houses, Mitsui has the highest exposure to resources businesses.
82GF Score
Get the complete analysis for MITSY
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
MITSY has been successfully added to your 
