Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
EnproNPO +0.60%81 PEG Ratio is 0.44 as of Jul. 31, 2026, which is 56% below its 10-year median of 0.99. GuruFocus rates NPO with a GF Score™ of 81/100 and a GF Value™ of $189.18 (Significantly Overvalued). The stock has 1 warning sign investors should review. Among 1,281 Industrial Products companies, Enpro ranks better than 88.84% on this metric.
PE Ratio without NRI / 5-Year EBITDA Growth Rate*
PEG Ratio is defined as the PE Ratio without NRI divided by the growth ratio. The growth rate we use is the 5-Year EBITDA growth rate. As of today, Enpro's PE Ratio without NRI is 11.53. Enpro's 5-Year EBITDA growth rate is 26.10%. Therefore, Enpro's PEG Ratio for today is 0.44.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Enpro's PEG Ratio or its related term are showing as below:
NPO'
s PEG Ratio Range Over the Past 10 Years
Min: 0.44 Med: 0.99 Max: 8.88
Current: 0.44
During the past 13 years, Enpro's highest PEG Ratio was 8.88. The lowest was 0.44. And the median was 0.99.
NPO's PEG Ratio is ranked better than 88.84% of 1281
companies
in the Industrial Products industry
Industry Median: 1.73
vs NPO: 0.44
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Enpro PEG Ratio Related Terms
Enpro PEG Ratio Historical Data
* Premium members only.
The historical data trend for Enpro's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, Enpro's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Enpro PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Enpro's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Enpro's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Enpro (NPO) has a PEG Ratio of 0.44 as of Jul. 31, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Enpro and its competitors. This is 56% below median its historical median of 0.99. Over the past decade, Enpro's PEG Ratio has ranged from 0.44 to 8.88. According to the industry distribution chart, Enpro ranks #143 out of 1281 companies in the Industrial Products industry, placing it in the top 11.2%.
Is Enpro's PEG Ratio too high?
Enpro's current PEG Ratio of 0.44 is 56% below median its 10-year median of 0.99. Over the past 10 years, this metric has ranged from a low of 0.44 to a high of 8.88. The Industrial Products industry median PEG Ratio is 1.73. Enpro's value of 0.44 is 74.6% below this industry median. Based on the distribution chart, Enpro ranks #143 out of 1281 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Enpro has a GF Score™ of 81/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Enpro's PEG Ratio compare to JBTM and GTES?
According to the Industrial Products industry distribution chart, Enpro ranks #143 out of 1281 companies for PEG Ratio. This places Enpro in the top 11% of its industry — outperforming the majority of peers. The industry median PEG Ratio is 1.73. Enpro's value of 0.44 is 74.6% below this benchmark. Historically, Enpro's own PEG Ratio has ranged from 0.44 to 8.88 over the past decade. While the company's 10-year median is 0.99 vs. the industry median of 1.73, Enpro has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.73, based on 1,281 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Enpro's current PEG Ratio of 0.44 is 74.6% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Enpro and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.73 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Enpro's current PEG Ratio is 0.44, which is 56% below median its own 10-year median of 0.99. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Enpro stock overvalued right now?
Based on GuruFocus' analysis, Enpro (NPO) is currently considered Significantly Overvalued. The stock's GF Value™ is $189.18, compared to a current price of $314.83 — trading 66.4% above its estimated fair value. The current PEG Ratio is 0.44, which is 56% below median its 10-year median of 0.99 and 74.6% below the Industrial Products industry median of 1.73. Enpro's overall GF Score™ is 81/100 with 1 warning sign to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Enpro (NPO), the current PEG Ratio is 0.44 as of Jul. 31, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Enpro (NPO) Overvalued in 2026?
Based on GuruFocus' analysis, Enpro stock appears to be overvalued.
The current stock price of $314.83 is trading 66.4% above its estimated GF Value™ of $189.18.
GuruFocus considers Enpro to be Significantly Overvalued.
Key valuation signals for NPO:
PEG Ratio: 0.44 (56% below median its 10-year median of 0.99)
GF Value™: $189.18 vs. price of $314.83 (66.4% above fair value)
Industry Position: 74.6% below the Industrial Products median (#143 of 1281)
No single metric tells the full story. See the NPO stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Enpro Inc formerly EnPro Industries Inc is a United States-based company that designs, develops, manufactures, and markets proprietary engineered industrial products. The company operates through two segments: Sealing Technologies, which derives maximum revenue, manufactures and markets sealing products, wheel-end components & systems; and Advanced Surface Technologies, which manufactures wafer processing sub-systems, thin-film coatings, optical filters, and other services like cleaning, coating, testing, and refurbishment. Its geographical segments are the United States, Europe, and other foreign countries.
81GF Score
Get the complete analysis for NPO
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NPO has been successfully added to your 
