Aeroflex IndustriesNSE:AEROFLEX -2.07%59 PEG Ratio is 3.39 as of Jul. 03, 2026, which is 89% above its 10-year median of 1.79. GuruFocus rates NSE:AEROFLEX with a GF Score™ of 59/100 and a GF Value™ of ₹237.33 (Significantly Overvalued). The stock has 6 warning signs investors should review. Among 1,280 Industrial Products companies, Aeroflex Industries ranks worse than 69.45% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Aeroflex Industries's PEG Ratio or its related term are showing as below:
NSE:AEROFLEX'
s PEG Ratio Range Over the Past 10 Years
Min: 1.05 Med: 1.79 Max: 3.59
Current: 3.47
During the past 7 years, Aeroflex Industries's highest PEG Ratio was 3.59. The lowest was 1.05. And the median was 1.79.
NSE:AEROFLEX's PEG Ratio is ranked worse than 69.45% of 1280
companies
in the Industrial Products industry
Industry Median: 1.875
vs NSE:AEROFLEX: 3.47
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Aeroflex Industries (NSE:AEROFLEX) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Aeroflex Industries PEG Ratio Related Terms
Aeroflex Industries PEG Ratio Historical Data
* Premium members only.
The historical data trend for Aeroflex Industries's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
NSE:AEROFLEX vs CRS, ATI, MLI: PEG Ratio Comparison
For the Metal Fabrication subindustry, Aeroflex Industries's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Aeroflex Industries PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Aeroflex Industries's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Aeroflex Industries's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Aeroflex Industries (NSE:AEROFLEX) has a PEG Ratio of 3.39 as of Jul. 03, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Aeroflex Industries and its competitors. This is 89% above median its historical median of 1.79. Over the past decade, Aeroflex Industries' PEG Ratio has ranged from 1.05 to 3.59. According to the industry distribution chart, Aeroflex Industries ranks #889 out of 1280 companies in the Industrial Products industry, placing it in the top 69.5%.
Is Aeroflex Industries' PEG Ratio too high?
Aeroflex Industries' current PEG Ratio of 3.39 is 89% above median its 10-year median of 1.79. Over the past 10 years, this metric has ranged from a low of 1.05 to a high of 3.59. The Industrial Products industry median PEG Ratio is 1.88. Aeroflex Industries' value of 3.39 is 80.8% above this industry median. Based on the distribution chart, Aeroflex Industries ranks #889 out of 1280 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Aeroflex Industries has a GF Score™ of 59/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Aeroflex Industries' PEG Ratio compare to CRS and ATI?
According to the Industrial Products industry distribution chart, Aeroflex Industries ranks #889 out of 1280 companies for PEG Ratio. This places Aeroflex Industries in the lower half of its industry. The industry median PEG Ratio is 1.88. Aeroflex Industries' value of 3.39 is 80.8% above this benchmark. Historically, Aeroflex Industries' own PEG Ratio has ranged from 1.05 to 3.59 over the past decade. While the company's 10-year median is 1.79 vs. the industry median of 1.88, Aeroflex Industries has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.88, based on 1,280 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Aeroflex Industries's current PEG Ratio of 3.39 is 80.8% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Aeroflex Industries and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.88 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Aeroflex Industries's current PEG Ratio is 3.39, which is 89% above median its own 10-year median of 1.79. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Aeroflex Industries stock overvalued right now?
Based on GuruFocus' analysis, Aeroflex Industries (NSE:AEROFLEX) is currently considered Significantly Overvalued. The stock's GF Value™ is ₹237.33, compared to a current price of ₹478.40 — trading 101.6% above its estimated fair value. The current PEG Ratio is 3.39, which is 89% above median its 10-year median of 1.79 and 80.8% above the Industrial Products industry median of 1.88. Aeroflex Industries' overall GF Score™ is 59/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Aeroflex Industries (NSE:AEROFLEX), the current PEG Ratio is 3.39 as of Jul. 03, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Aeroflex Industries (NSE:AEROFLEX) Overvalued in 2026?
Based on GuruFocus' analysis, Aeroflex Industries stock appears to be overvalued.
The current stock price of ₹478.40 is trading 101.6% above its estimated GF Value™ of ₹237.33.
GuruFocus considers Aeroflex Industries to be Significantly Overvalued.
Key valuation signals for NSE:AEROFLEX:
PEG Ratio: 3.39 (89% above median its 10-year median of 1.79)
GF Value™: ₹237.33 vs. price of ₹478.40 (101.6% above fair value)
Industry Position: 80.8% above the Industrial Products median (#889 of 1280)
No single metric tells the full story. See the NSE:AEROFLEX stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Aeroflex Industries Ltd is a manufacturer and supplier of environment-friendly metallic flexible flow solution products catering to international and domestic markets. The products supplied by the company include Corrugated Stainless Steel Hose, Stainless Steel Hose Assemblies, Gas Hose, Solar Hose, Industrial Hose Assemblies, and other products.
59GF Score
Get the complete analysis for NSE:AEROFLEX
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:AEROFLEX has been successfully added to your 
