Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
The Anup EngineeringNSE:ANUP +0.59%80 PEG Ratio is 1.61 as of Jul. 18, 2026, which is 28% below its 10-year median of 2.24. GuruFocus rates NSE:ANUP with a GF Score™ of 80/100 and a GF Value™ of ₹2,557.04 (Modestly Undervalued). The stock has 4 warning signs investors should review. Among 1,276 Industrial Products companies, The Anup Engineering ranks better than 54.23% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for The Anup Engineering's PEG Ratio or its related term are showing as below:
NSE:ANUP'
s PEG Ratio Range Over the Past 10 Years
Min: 0.91 Med: 2.24 Max: 3.77
Current: 1.61
During the past 9 years, The Anup Engineering's highest PEG Ratio was 3.77. The lowest was 0.91. And the median was 2.24.
NSE:ANUP's PEG Ratio is ranked better than 54.23% of 1276
companies
in the Industrial Products industry
Industry Median: 1.785
vs NSE:ANUP: 1.61
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
The Anup Engineering (NSE:ANUP) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
The Anup Engineering PEG Ratio Related Terms
The Anup Engineering PEG Ratio Historical Data
* Premium members only.
The historical data trend for The Anup Engineering's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, The Anup Engineering's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
The Anup Engineering PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, The Anup Engineering's PEG Ratio distribution charts can be found below:
* The bar in red indicates where The Anup Engineering's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The Anup Engineering (NSE:ANUP) has a PEG Ratio of 1.61 as of Jul. 18, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on The Anup Engineering and its competitors. This is 28% below median its historical median of 2.24. Over the past decade, The Anup Engineering's PEG Ratio has ranged from 0.91 to 3.77. According to the industry distribution chart, The Anup Engineering ranks #584 out of 1276 companies in the Industrial Products industry, placing it in the top 45.8%.
Is The Anup Engineering's PEG Ratio too high?
The Anup Engineering's current PEG Ratio of 1.61 is 28% below median its 10-year median of 2.24. Over the past 10 years, this metric has ranged from a low of 0.91 to a high of 3.77. The Industrial Products industry median PEG Ratio is 1.79. The Anup Engineering's value of 1.61 is 9.8% below this industry median. Based on the distribution chart, The Anup Engineering ranks #584 out of 1276 companies in the Industrial Products industry, which is above the industry midpoint. Overall, The Anup Engineering has a GF Score™ of 80/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does The Anup Engineering's PEG Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, The Anup Engineering ranks #584 out of 1276 companies for PEG Ratio. This puts The Anup Engineering in the upper half of its industry. The industry median PEG Ratio is 1.79. The Anup Engineering's value of 1.61 is 9.8% below this benchmark. Historically, The Anup Engineering's own PEG Ratio has ranged from 0.91 to 3.77 over the past decade. While the company's 10-year median is 2.24 vs. the industry median of 1.79, The Anup Engineering has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.79, based on 1,276 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. The Anup Engineering's current PEG Ratio of 1.61 is 9.8% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on The Anup Engineering and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.79 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. The Anup Engineering's current PEG Ratio is 1.61, which is 28% below median its own 10-year median of 2.24. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is The Anup Engineering stock overvalued right now?
Based on GuruFocus' analysis, The Anup Engineering (NSE:ANUP) is currently considered Modestly Undervalued. The stock's GF Value™ is ₹2,557.04, compared to a current price of ₹2,166.30 — trading 15.3% below its estimated fair value. The current PEG Ratio is 1.61, which is 28% below median its 10-year median of 2.24 and 9.8% below the Industrial Products industry median of 1.79. The Anup Engineering's overall GF Score™ is 80/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For The Anup Engineering (NSE:ANUP), the current PEG Ratio is 1.61 as of Jul. 18, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is The Anup Engineering (NSE:ANUP) Overvalued in 2026?
Based on GuruFocus' analysis, The Anup Engineering stock appears to be undervalued.
The current stock price of ₹2,166.30 is trading 15.3% below its estimated GF Value™ of ₹2,557.04.
GuruFocus considers The Anup Engineering to be Modestly Undervalued.
Key valuation signals for NSE:ANUP:
PEG Ratio: 1.61 (28% below median its 10-year median of 2.24)
GF Value™: ₹2,557.04 vs. price of ₹2,166.30 (15.3% below fair value)
Industry Position: 9.8% below the Industrial Products median (#584 of 1276)
No single metric tells the full story. See the NSE:ANUP stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
The Anup Engineering Ltd is engaged in the manufacturing and fabrication of process equipment required for chemicals, petrochemicals, pharmaceuticals, fertilizers, drugs, and other allied industries. The Company's business activity falls within a single operating business segment of Engineering products. The products offered by the group are Dish ends, Industrial centrifuges, Static process equipment, and others. It has a business presence in India and other countries, of which key revenue is derived from India.
80GF Score
Get the complete analysis for NSE:ANUP
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:ANUP has been successfully added to your 
