Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Lokesh MachinesNSE:LOKESHMACH -1.18%65 PEG Ratio is 16.06 as of Jul. 28, 2026, which is 93% above its 10-year median of 8.30. GuruFocus rates NSE:LOKESHMACH with a GF Score™ of 65/100 and a GF Value™ of ₹173.13 (Significantly Overvalued). The stock has 7 warning signs investors should review. Among 1,282 Industrial Products companies, Lokesh Machines ranks worse than 92.36% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Lokesh Machines's PEG Ratio or its related term are showing as below:
NSE:LOKESHMACH'
s PEG Ratio Range Over the Past 10 Years
Min: 1.6 Med: 8.3 Max: 507.08
Current: 15.87
During the past 13 years, Lokesh Machines's highest PEG Ratio was 507.08. The lowest was 1.60. And the median was 8.30.
NSE:LOKESHMACH's PEG Ratio is ranked worse than 92.36% of 1282
companies
in the Industrial Products industry
Industry Median: 1.75
vs NSE:LOKESHMACH: 15.87
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Lokesh Machines (NSE:LOKESHMACH) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Lokesh Machines PEG Ratio Related Terms
Lokesh Machines PEG Ratio Historical Data
* Premium members only.
The historical data trend for Lokesh Machines's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
NSE:LOKESHMACH vs GEV, ETN, PH: PEG Ratio Comparison
For the Specialty Industrial Machinery subindustry, Lokesh Machines's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Lokesh Machines PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Lokesh Machines's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Lokesh Machines's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Lokesh Machines (NSE:LOKESHMACH) has a PEG Ratio of 16.06 as of Jul. 28, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Lokesh Machines and its competitors. This is 93% above median its historical median of 8.30. Over the past decade, Lokesh Machines' PEG Ratio has ranged from 1.60 to 507.08. According to the industry distribution chart, Lokesh Machines ranks #1184 out of 1282 companies in the Industrial Products industry, placing it in the top 92.4%.
Is Lokesh Machines' PEG Ratio too high?
Lokesh Machines' current PEG Ratio of 16.06 is 93% above median its 10-year median of 8.30. Over the past 10 years, this metric has ranged from a low of 1.60 to a high of 507.08. The Industrial Products industry median PEG Ratio is 1.75. Lokesh Machines' value of 16.06 is 817.7% above this industry median. Based on the distribution chart, Lokesh Machines ranks #1184 out of 1282 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Lokesh Machines has a GF Score™ of 65/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Lokesh Machines' PEG Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Lokesh Machines ranks #1184 out of 1282 companies for PEG Ratio. This places Lokesh Machines in the lower half of its industry. The industry median PEG Ratio is 1.75. Lokesh Machines' value of 16.06 is 817.7% above this benchmark. Historically, Lokesh Machines' own PEG Ratio has ranged from 1.60 to 507.08 over the past decade. While the company's 10-year median is 8.30 vs. the industry median of 1.75, Lokesh Machines has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.75, based on 1,282 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Lokesh Machines's current PEG Ratio of 16.06 is 817.7% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Lokesh Machines and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.75 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Lokesh Machines's current PEG Ratio is 16.06, which is 93% above median its own 10-year median of 8.30. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Lokesh Machines stock overvalued right now?
Based on GuruFocus' analysis, Lokesh Machines (NSE:LOKESHMACH) is currently considered Significantly Overvalued. The stock's GF Value™ is ₹173.13, compared to a current price of ₹335.00 — trading 93.5% above its estimated fair value. The current PEG Ratio is 16.06, which is 93% above median its 10-year median of 8.30 and 817.7% above the Industrial Products industry median of 1.75. Lokesh Machines' overall GF Score™ is 65/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Lokesh Machines (NSE:LOKESHMACH), the current PEG Ratio is 16.06 as of Jul. 28, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Lokesh Machines (NSE:LOKESHMACH) Overvalued in 2026?
Based on GuruFocus' analysis, Lokesh Machines stock appears to be overvalued.
The current stock price of ₹335.00 is trading 93.5% above its estimated GF Value™ of ₹173.13.
GuruFocus considers Lokesh Machines to be Significantly Overvalued.
Key valuation signals for NSE:LOKESHMACH:
PEG Ratio: 16.06 (93% above median its 10-year median of 8.30)
GF Value™: ₹173.13 vs. price of ₹335.00 (93.5% above fair value)
Industry Position: 817.7% above the Industrial Products median (#1184 of 1282)
No single metric tells the full story. See the NSE:LOKESHMACH stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Lokesh Machines Ltd is engaged in the manufacturing of machines, tools, and components. It is involved in the manufacture of Special Purpose Machines (SPMs), General Purpose Machines/CNC Lathes (GPMs), Connecting Rods, and the machining of Cylinder Blocks and Heads, as well as other related activities. The company is organized into two business segments: the Machines Division and the Component Division. Maximum revenue is generated from its Machines Division. Geographically, the company derives the majority of its revenue from its business in India, with the remainder coming from exports to markets such as Turkey, Italy, the USA, and the Middle East, supported by a widespread dealer network spanning South Africa, Italy, Turkey, and Bahrain.
65GF Score
Get the complete analysis for NSE:LOKESHMACH
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:LOKESHMACH has been successfully added to your 
