Pasupati AcrylonNSE:PASUPTAC -0.20%83 PEG Ratio is 1.79 as of Jul. 06, 2026, which is 129% above its 10-year median of 0.78. GuruFocus rates NSE:PASUPTAC with a GF Score™ of 83/100 and a GF Value™ of ₹68.28 (Fairly Valued). The stock has 3 warning signs investors should review. Among 361 Manufacturing - Apparel & Accessories companies, Pasupati Acrylon ranks worse than 57.89% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Pasupati Acrylon's PEG Ratio or its related term are showing as below:
NSE:PASUPTAC'
s PEG Ratio Range Over the Past 10 Years
Min: 0.12 Med: 0.78 Max: 10.9
Current: 1.8
During the past 13 years, Pasupati Acrylon's highest PEG Ratio was 10.90. The lowest was 0.12. And the median was 0.78.
NSE:PASUPTAC's PEG Ratio is ranked worse than 57.89% of 361
companies
in the Manufacturing - Apparel & Accessories industry
Industry Median: 1.34
vs NSE:PASUPTAC: 1.80
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Pasupati Acrylon (NSE:PASUPTAC) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Pasupati Acrylon PEG Ratio Related Terms
Pasupati Acrylon PEG Ratio Historical Data
* Premium members only.
The historical data trend for Pasupati Acrylon's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Textile Manufacturing subindustry, Pasupati Acrylon's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Pasupati Acrylon PEG Ratio vs Manufacturing - Apparel & Accessories Industry
For the Manufacturing - Apparel & Accessories industry and Consumer Cyclical sector, Pasupati Acrylon's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Pasupati Acrylon's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Pasupati Acrylon (NSE:PASUPTAC) has a PEG Ratio of 1.79 as of Jul. 06, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Pasupati Acrylon and its competitors. This is 129% above median its historical median of 0.78. Over the past decade, Pasupati Acrylon's PEG Ratio has ranged from 0.12 to 10.90. According to the industry distribution chart, Pasupati Acrylon ranks #209 out of 361 companies in the Manufacturing - Apparel & Accessories industry, placing it in the top 57.9%.
Is Pasupati Acrylon's PEG Ratio too high?
Pasupati Acrylon's current PEG Ratio of 1.79 is 129% above median its 10-year median of 0.78. Over the past 10 years, this metric has ranged from a low of 0.12 to a high of 10.90. The Manufacturing - Apparel & Accessories industry median PEG Ratio is 1.34. Pasupati Acrylon's value of 1.79 is 33.6% above this industry median. Based on the distribution chart, Pasupati Acrylon ranks #209 out of 361 companies in the Manufacturing - Apparel & Accessories industry, which is below the industry midpoint. Overall, Pasupati Acrylon has a GF Score™ of 83/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Pasupati Acrylon's PEG Ratio compare to competitors?
According to the Manufacturing - Apparel & Accessories industry distribution chart, Pasupati Acrylon ranks #209 out of 361 companies for PEG Ratio. This places Pasupati Acrylon in the lower half of its industry. The industry median PEG Ratio is 1.34. Pasupati Acrylon's value of 1.79 is 33.6% above this benchmark. Historically, Pasupati Acrylon's own PEG Ratio has ranged from 0.12 to 10.90 over the past decade. While the company's 10-year median is 0.78 vs. the industry median of 1.34, Pasupati Acrylon has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Manufacturing - Apparel & Accessories company?
The median PEG Ratio among Manufacturing - Apparel & Accessories companies is 1.34, based on 361 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Pasupati Acrylon's current PEG Ratio of 1.79 is 33.6% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Pasupati Acrylon and its competitors. For the Manufacturing - Apparel & Accessories industry, the median PEG Ratio is 1.34 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Pasupati Acrylon's current PEG Ratio is 1.79, which is 129% above median its own 10-year median of 0.78. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Pasupati Acrylon stock overvalued right now?
Based on GuruFocus' analysis, Pasupati Acrylon (NSE:PASUPTAC) is currently considered Fairly Valued. The stock's GF Value™ is ₹68.28, compared to a current price of ₹63.71 — trading 6.7% below its estimated fair value. The current PEG Ratio is 1.79, which is 129% above median its 10-year median of 0.78 and 33.6% above the Manufacturing - Apparel & Accessories industry median of 1.34. Pasupati Acrylon's overall GF Score™ is 83/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Pasupati Acrylon (NSE:PASUPTAC), the current PEG Ratio is 1.79 as of Jul. 06, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Pasupati Acrylon (NSE:PASUPTAC) Overvalued in 2026?
Based on GuruFocus' analysis, Pasupati Acrylon stock appears to be undervalued.
The current stock price of ₹63.71 is trading 6.7% below its estimated GF Value™ of ₹68.28.
GuruFocus considers Pasupati Acrylon to be Fairly Valued.
Key valuation signals for NSE:PASUPTAC:
PEG Ratio: 1.79 (129% above median its 10-year median of 0.78)
GF Value™: ₹68.28 vs. price of ₹63.71 (6.7% below fair value)
Industry Position: 33.6% above the Manufacturing - Apparel & Accessories median (#209 of 361)
No single metric tells the full story. See the NSE:PASUPTAC stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Pasupati Acrylon Ltd operates in the textile industry. The company's operating segment includes the Acrylic Fibre Division, Ethanol Plant, and Cast Polypropylene Film Division. It generates a majority of its revenue from the Acrylic Fibre segment. The products offered by the group are Hydrophilic Fiber, Soft Feel Fiber, Low Pill Fiber, Metalized CPP, and Natural and White CPP.
83GF Score
Get the complete analysis for NSE:PASUPTAC
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:PASUPTAC has been successfully added to your 
