Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Pennar IndustriesNSE:PENIND +0.10%82 PEG Ratio is 0.48 as of Jul. 14, 2026, which is 24% below its 10-year median of 0.63. GuruFocus rates NSE:PENIND with a GF Score™ of 82/100 and a GF Value™ of ₹215.94 (Modestly Undervalued). The stock has 2 warning signs investors should review. Among 1,276 Industrial Products companies, Pennar Industries ranks better than 88.32% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Pennar Industries's PEG Ratio or its related term are showing as below:
NSE:PENIND'
s PEG Ratio Range Over the Past 10 Years
Min: 0.26 Med: 0.63 Max: 34.61
Current: 0.48
During the past 13 years, Pennar Industries's highest PEG Ratio was 34.61. The lowest was 0.26. And the median was 0.63.
NSE:PENIND's PEG Ratio is ranked better than 88.32% of 1276
companies
in the Industrial Products industry
Industry Median: 1.79
vs NSE:PENIND: 0.48
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Pennar Industries (NSE:PENIND) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Pennar Industries PEG Ratio Related Terms
Pennar Industries PEG Ratio Historical Data
* Premium members only.
The historical data trend for Pennar Industries's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, Pennar Industries's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Pennar Industries PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Pennar Industries's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Pennar Industries's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Pennar Industries (NSE:PENIND) has a PEG Ratio of 0.48 as of Jul. 14, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Pennar Industries and its competitors. This is 24% below median its historical median of 0.63. Over the past decade, Pennar Industries' PEG Ratio has ranged from 0.26 to 34.61. According to the industry distribution chart, Pennar Industries ranks #149 out of 1276 companies in the Industrial Products industry, placing it in the top 11.7%.
Is Pennar Industries' PEG Ratio too high?
Pennar Industries' current PEG Ratio of 0.48 is 24% below median its 10-year median of 0.63. Over the past 10 years, this metric has ranged from a low of 0.26 to a high of 34.61. The Industrial Products industry median PEG Ratio is 1.79. Pennar Industries' value of 0.48 is 73.2% below this industry median. Based on the distribution chart, Pennar Industries ranks #149 out of 1276 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Pennar Industries has a GF Score™ of 82/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Pennar Industries' PEG Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Pennar Industries ranks #149 out of 1276 companies for PEG Ratio. This places Pennar Industries in the top 12% of its industry — outperforming the majority of peers. The industry median PEG Ratio is 1.79. Pennar Industries' value of 0.48 is 73.2% below this benchmark. Historically, Pennar Industries' own PEG Ratio has ranged from 0.26 to 34.61 over the past decade. While the company's 10-year median is 0.63 vs. the industry median of 1.79, Pennar Industries has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.79, based on 1,276 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Pennar Industries's current PEG Ratio of 0.48 is 73.2% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Pennar Industries and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.79 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Pennar Industries's current PEG Ratio is 0.48, which is 24% below median its own 10-year median of 0.63. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Pennar Industries stock overvalued right now?
Based on GuruFocus' analysis, Pennar Industries (NSE:PENIND) is currently considered Modestly Undervalued. The stock's GF Value™ is ₹215.94, compared to a current price of ₹172.34 — trading 20.2% below its estimated fair value. The current PEG Ratio is 0.48, which is 24% below median its 10-year median of 0.63 and 73.2% below the Industrial Products industry median of 1.79. Pennar Industries' overall GF Score™ is 82/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Pennar Industries (NSE:PENIND), the current PEG Ratio is 0.48 as of Jul. 14, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Pennar Industries (NSE:PENIND) Overvalued in 2026?
Based on GuruFocus' analysis, Pennar Industries stock appears to be undervalued.
The current stock price of ₹172.34 is trading 20.2% below its estimated GF Value™ of ₹215.94.
GuruFocus considers Pennar Industries to be Modestly Undervalued.
Key valuation signals for NSE:PENIND:
PEG Ratio: 0.48 (24% below median its 10-year median of 0.63)
GF Value™: ₹215.94 vs. price of ₹172.34 (20.2% below fair value)
Industry Position: 73.2% below the Industrial Products median (#149 of 1276)
No single metric tells the full story. See the NSE:PENIND stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Pennar Industries Ltd provides engineering products and services. The company's operating segment includes Diversified Engineering and Custom designed building solutions and auxiliaries. It generates maximum revenue from the Diversified Engineering segment. Geographically, it derives a majority of its revenue from India. The company serves Infrastructure, Automobiles, Power, General Engineering, Building and Construction, Refineries, and other sectors. Its product portfolio includes Cold Rolled Steel Strips, Precision Tubes, Railway wagons/Coaches, Pre-Engineered Building Systems, Solar module mounting structures, Photo Voltaic panels, Sheet Metal Components, Hydraulic Cylinders, Road Safety Systems, Water and Sewage treatment solutions, and Desalination projects.
82GF Score
Get the complete analysis for NSE:PENIND
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:PENIND has been successfully added to your 
