PTC IndustriesNSE:PTCIL +1.58%96 PEG Ratio is 8.74 as of Jul. 05, 2026, which is 33% below its 10-year median of 12.98. GuruFocus rates NSE:PTCIL with a GF Score™ of 96/100 and a GF Value™ of ₹26,549.85 (Possible Value Trap). The stock has 6 warning signs investors should review. Among 1,280 Industrial Products companies, PTC Industries ranks worse than 84.77% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for PTC Industries's PEG Ratio or its related term are showing as below:
NSE:PTCIL'
s PEG Ratio Range Over the Past 10 Years
Min: 0.76 Med: 12.98 Max: 26.43
Current: 8.74
During the past 13 years, PTC Industries's highest PEG Ratio was 26.43. The lowest was 0.76. And the median was 12.98.
NSE:PTCIL's PEG Ratio is ranked worse than 84.77% of 1280
companies
in the Industrial Products industry
Industry Median: 1.875
vs NSE:PTCIL: 8.74
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
PTC Industries (NSE:PTCIL) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
PTC Industries PEG Ratio Related Terms
PTC Industries PEG Ratio Historical Data
* Premium members only.
The historical data trend for PTC Industries's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Metal Fabrication subindustry, PTC Industries's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
PTC Industries PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, PTC Industries's PEG Ratio distribution charts can be found below:
* The bar in red indicates where PTC Industries's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
PTC Industries (NSE:PTCIL) has a PEG Ratio of 8.74 as of Jul. 05, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on PTC Industries and its competitors. This is 33% below median its historical median of 12.98. Over the past decade, PTC Industries' PEG Ratio has ranged from 0.76 to 26.43. According to the industry distribution chart, PTC Industries ranks #1085 out of 1280 companies in the Industrial Products industry, placing it in the top 84.8%.
Is PTC Industries' PEG Ratio too high?
PTC Industries' current PEG Ratio of 8.74 is 33% below median its 10-year median of 12.98. Over the past 10 years, this metric has ranged from a low of 0.76 to a high of 26.43. The Industrial Products industry median PEG Ratio is 1.88. PTC Industries' value of 8.74 is 366.1% above this industry median. Based on the distribution chart, PTC Industries ranks #1085 out of 1280 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, PTC Industries has a GF Score™ of 96/100 and is considered Possible Value Trap, reflecting its overall financial health beyond just this single metric.
How does PTC Industries' PEG Ratio compare to CRS and ATI?
According to the Industrial Products industry distribution chart, PTC Industries ranks #1085 out of 1280 companies for PEG Ratio. This places PTC Industries in the lower half of its industry. The industry median PEG Ratio is 1.88. PTC Industries' value of 8.74 is 366.1% above this benchmark. Historically, PTC Industries' own PEG Ratio has ranged from 0.76 to 26.43 over the past decade. While the company's 10-year median is 12.98 vs. the industry median of 1.88, PTC Industries has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.88, based on 1,280 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. PTC Industries's current PEG Ratio of 8.74 is 366.1% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on PTC Industries and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.88 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. PTC Industries's current PEG Ratio is 8.74, which is 33% below median its own 10-year median of 12.98. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is PTC Industries stock overvalued right now?
Based on GuruFocus' analysis, PTC Industries (NSE:PTCIL) is currently considered Possible Value Trap. The stock's GF Value™ is ₹26,549.85, compared to a current price of ₹17,763.00 — trading 33.1% below its estimated fair value. The current PEG Ratio is 8.74, which is 33% below median its 10-year median of 12.98 and 366.1% above the Industrial Products industry median of 1.88. PTC Industries' overall GF Score™ is 96/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For PTC Industries (NSE:PTCIL), the current PEG Ratio is 8.74 as of Jul. 05, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is PTC Industries (NSE:PTCIL) Overvalued in 2026?
Based on GuruFocus' analysis, PTC Industries stock appears to be undervalued.
The current stock price of ₹17,763.00 is trading 33.1% below its estimated GF Value™ of ₹26,549.85.
GuruFocus considers PTC Industries to be Possible Value Trap.
Key valuation signals for NSE:PTCIL:
PEG Ratio: 8.74 (33% below median its 10-year median of 12.98)
GF Value™: ₹26,549.85 vs. price of ₹17,763.00 (33.1% below fair value)
Industry Position: 366.1% above the Industrial Products median (#1085 of 1280)
No single metric tells the full story. See the NSE:PTCIL stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
PTC Industries Ltd manufactures high-precision metal components for industrial, aerospace, and defence sectors. It produces aerospace-grade titanium and superalloy materials, along with corrosion-resistant castings for various industries. Its Strategic Materials Technology Complex in Uttar Pradesh houses integrated facilities for melting, casting, forging, machining, and processes. Through its subsidiary, Aerolloy Technologies, PTC supplies titanium and superalloy castings to domestic and international aerospace markets. The company's operations are divided into Castings, Metals, and Machining groups, covering the entire value chain. PTC has one reportable segment, Engineering and allied activities, and derives the majority of its revenue from international customers.
96GF Score
Get the complete analysis for NSE:PTCIL
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:PTCIL has been successfully added to your 
