Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
SKP Bearing IndustriesNSE:SKP +2.65%67 PEG Ratio is 62.22 as of Jul. 20, 2026, which is 70% below its 10-year median of 209.99. GuruFocus rates NSE:SKP with a GF Score™ of 67/100 and a GF Value™ of ₹427.26 (Possible Value Trap). The stock has 5 warning signs investors should review. Among 1,277 Industrial Products companies, SKP Bearing Industries ranks worse than 98.2% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for SKP Bearing Industries's PEG Ratio or its related term are showing as below:
NSE:SKP'
s PEG Ratio Range Over the Past 10 Years
Min: 60 Med: 209.99 Max: 242.96
Current: 62.22
During the past 8 years, SKP Bearing Industries's highest PEG Ratio was 242.96. The lowest was 60.00. And the median was 209.99.
NSE:SKP's PEG Ratio is ranked worse than 98.2% of 1277
companies
in the Industrial Products industry
Industry Median: 1.76
vs NSE:SKP: 62.22
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
SKP Bearing Industries (NSE:SKP) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Tools & Accessories subindustry, SKP Bearing Industries's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
SKP Bearing Industries PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, SKP Bearing Industries's PEG Ratio distribution charts can be found below:
* The bar in red indicates where SKP Bearing Industries's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
SKP Bearing Industries (NSE:SKP) has a PEG Ratio of 62.22 as of Jul. 20, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on SKP Bearing Industries and its competitors. This is 70% below median its historical median of 209.99. Over the past decade, SKP Bearing Industries' PEG Ratio has ranged from 60.00 to 242.96. According to the industry distribution chart, SKP Bearing Industries ranks #1254 out of 1277 companies in the Industrial Products industry, placing it in the top 98.2%.
Is SKP Bearing Industries' PEG Ratio too high?
SKP Bearing Industries' current PEG Ratio of 62.22 is 70% below median its 10-year median of 209.99. Over the past 10 years, this metric has ranged from a low of 60.00 to a high of 242.96. The Industrial Products industry median PEG Ratio is 1.76. SKP Bearing Industries' value of 62.22 is 3435.2% above this industry median. Based on the distribution chart, SKP Bearing Industries ranks #1254 out of 1277 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, SKP Bearing Industries has a GF Score™ of 67/100 and is considered Possible Value Trap, reflecting its overall financial health beyond just this single metric.
How does SKP Bearing Industries' PEG Ratio compare to SNA and RBC?
According to the Industrial Products industry distribution chart, SKP Bearing Industries ranks #1254 out of 1277 companies for PEG Ratio. This places SKP Bearing Industries in the lower half of its industry. The industry median PEG Ratio is 1.76. SKP Bearing Industries' value of 62.22 is 3435.2% above this benchmark. Historically, SKP Bearing Industries' own PEG Ratio has ranged from 60.00 to 242.96 over the past decade. While the company's 10-year median is 209.99 vs. the industry median of 1.76, SKP Bearing Industries has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.76, based on 1,277 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. SKP Bearing Industries's current PEG Ratio of 62.22 is 3435.2% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on SKP Bearing Industries and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.76 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. SKP Bearing Industries's current PEG Ratio is 62.22, which is 70% below median its own 10-year median of 209.99. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is SKP Bearing Industries stock overvalued right now?
Based on GuruFocus' analysis, SKP Bearing Industries (NSE:SKP) is currently considered Possible Value Trap. The stock's GF Value™ is ₹427.26, compared to a current price of ₹155.00 — trading 63.7% below its estimated fair value. The current PEG Ratio is 62.22, which is 70% below median its 10-year median of 209.99 and 3435.2% above the Industrial Products industry median of 1.76. SKP Bearing Industries' overall GF Score™ is 67/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For SKP Bearing Industries (NSE:SKP), the current PEG Ratio is 62.22 as of Jul. 20, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is SKP Bearing Industries (NSE:SKP) Overvalued in 2026?
Based on GuruFocus' analysis, SKP Bearing Industries stock appears to be undervalued.
The current stock price of ₹155.00 is trading 63.7% below its estimated GF Value™ of ₹427.26.
GuruFocus considers SKP Bearing Industries to be Possible Value Trap.
Key valuation signals for NSE:SKP:
PEG Ratio: 62.22 (70% below median its 10-year median of 209.99)
GF Value™: ₹427.26 vs. price of ₹155.00 (63.7% below fair value)
Industry Position: 3435.2% above the Industrial Products median (#1254 of 1277)
No single metric tells the full story. See the NSE:SKP stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
SKP Bearing Industries Ltd is engaged in manufacturing needle rollers, cylindrical rollers, pins, steel balls, and other related products, generating of electricity through windmill power projects, and solar power projects. The company supplies its products to diverse industries such as textiles, automobiles, and other products across India.
67GF Score
Get the complete analysis for NSE:SKP
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:SKP has been successfully added to your 
