Timken IndiaNSE:TIMKEN -0.39%99 PEG Ratio is 3.73 as of Jul. 13, 2026, which is 39% above its 10-year median of 2.69. GuruFocus rates NSE:TIMKEN with a GF Score™ of 99/100 and a GF Value™ of ₹3,798.81 (Modestly Undervalued). The stock has 1 warning sign investors should review. Among 1,276 Industrial Products companies, Timken India ranks worse than 72.41% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Timken India's PEG Ratio or its related term are showing as below:
NSE:TIMKEN'
s PEG Ratio Range Over the Past 10 Years
Min: 1.2 Med: 2.69 Max: 5.58
Current: 3.73
During the past 13 years, Timken India's highest PEG Ratio was 5.58. The lowest was 1.20. And the median was 2.69.
NSE:TIMKEN's PEG Ratio is ranked worse than 72.41% of 1276
companies
in the Industrial Products industry
Industry Median: 1.82
vs NSE:TIMKEN: 3.73
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Timken India (NSE:TIMKEN) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Timken India PEG Ratio Related Terms
Timken India PEG Ratio Historical Data
* Premium members only.
The historical data trend for Timken India's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
NSE:TIMKEN vs SNA, RBC, LECO: PEG Ratio Comparison
For the Tools & Accessories subindustry, Timken India's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Timken India PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Timken India's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Timken India's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Timken India (NSE:TIMKEN) has a PEG Ratio of 3.73 as of Jul. 13, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Timken India and its competitors. This is 39% above median its historical median of 2.69. Over the past decade, Timken India's PEG Ratio has ranged from 1.20 to 5.58. According to the industry distribution chart, Timken India ranks #924 out of 1276 companies in the Industrial Products industry, placing it in the top 72.4%.
Is Timken India's PEG Ratio too high?
Timken India's current PEG Ratio of 3.73 is 39% above median its 10-year median of 2.69. Over the past 10 years, this metric has ranged from a low of 1.20 to a high of 5.58. The Industrial Products industry median PEG Ratio is 1.82. Timken India's value of 3.73 is 104.9% above this industry median. Based on the distribution chart, Timken India ranks #924 out of 1276 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Timken India has a GF Score™ of 99/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Timken India's PEG Ratio compare to SNA and RBC?
According to the Industrial Products industry distribution chart, Timken India ranks #924 out of 1276 companies for PEG Ratio. This places Timken India in the lower half of its industry. The industry median PEG Ratio is 1.82. Timken India's value of 3.73 is 104.9% above this benchmark. Historically, Timken India's own PEG Ratio has ranged from 1.20 to 5.58 over the past decade. While the company's 10-year median is 2.69 vs. the industry median of 1.82, Timken India has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.82, based on 1,276 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Timken India's current PEG Ratio of 3.73 is 104.9% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Timken India and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.82 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Timken India's current PEG Ratio is 3.73, which is 39% above median its own 10-year median of 2.69. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Timken India stock overvalued right now?
Based on GuruFocus' analysis, Timken India (NSE:TIMKEN) is currently considered Modestly Undervalued. The stock's GF Value™ is ₹3,798.81, compared to a current price of ₹3,205.00 — trading 15.6% below its estimated fair value. The current PEG Ratio is 3.73, which is 39% above median its 10-year median of 2.69 and 104.9% above the Industrial Products industry median of 1.82. Timken India's overall GF Score™ is 99/100 with 1 warning sign to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Timken India (NSE:TIMKEN), the current PEG Ratio is 3.73 as of Jul. 13, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Timken India (NSE:TIMKEN) Overvalued in 2026?
Based on GuruFocus' analysis, Timken India stock appears to be undervalued.
The current stock price of ₹3,205.00 is trading 15.6% below its estimated GF Value™ of ₹3,798.81.
GuruFocus considers Timken India to be Modestly Undervalued.
Key valuation signals for NSE:TIMKEN:
PEG Ratio: 3.73 (39% above median its 10-year median of 2.69)
GF Value™: ₹3,798.81 vs. price of ₹3,205.00 (15.6% below fair value)
Industry Position: 104.9% above the Industrial Products median (#924 of 1276)
No single metric tells the full story. See the NSE:TIMKEN stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Timken India Ltd is an India-based company that manufactures, distributes, and services bearings and related components. The company also provides repair and maintenance services for industrial gearboxes. The company's products, predominantly engineered bearings, and mechanical power transmission products, are marketed under brand names including Timken, Beka, Diamond, Drives, and others. The company's clients come from defense, mining, metals, and civil aerospace sectors. Timken India generates the majority of its sales from the Indian domestic market and the rest from the United States of America, and other countries.
99GF Score
Get the complete analysis for NSE:TIMKEN
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:TIMKEN has been successfully added to your 
