Parker HannifinPH -2.12%93 PEG Ratio is 1.64 as of Jun. 27, 2026, which is 2% below its 10-year median of 1.68. GuruFocus rates PH with a GF Score™ of 93/100 and a GF Value™ of $678.41 (Significantly Overvalued). The stock has 6 warning signs investors should review. Among 1,286 Industrial Products companies, Parker Hannifin ranks better than 54.51% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Parker Hannifin's PEG Ratio or its related term are showing as below:
PH'
s PEG Ratio Range Over the Past 10 Years
Min: 0.69 Med: 1.68 Max: 438.4
Current: 1.64
During the past 13 years, Parker Hannifin's highest PEG Ratio was 438.40. The lowest was 0.69. And the median was 1.68.
PH's PEG Ratio is ranked better than 54.51% of 1286
companies
in the Industrial Products industry
Industry Median: 1.87
vs PH: 1.64
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Parker Hannifin (NYSE:PH) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Parker Hannifin PEG Ratio Related Terms
Parker Hannifin PEG Ratio Historical Data
* Premium members only.
The historical data trend for Parker Hannifin's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, Parker Hannifin's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Parker Hannifin PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Parker Hannifin's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Parker Hannifin's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Parker Hannifin (PH) has a PEG Ratio of 1.64 as of Jun. 27, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Parker Hannifin and its competitors. This is near median its historical median of 1.68. Over the past decade, Parker Hannifin's PEG Ratio has ranged from 0.69 to 438.40. According to the industry distribution chart, Parker Hannifin ranks #585 out of 1286 companies in the Industrial Products industry, placing it in the top 45.5%.
Is Parker Hannifin's PEG Ratio too high?
Parker Hannifin's current PEG Ratio of 1.64 is near median its 10-year median of 1.68. Over the past 10 years, this metric has ranged from a low of 0.69 to a high of 438.40. The Industrial Products industry median PEG Ratio is 1.87. Parker Hannifin's value of 1.64 is 12.3% below this industry median. Based on the distribution chart, Parker Hannifin ranks #585 out of 1286 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Parker Hannifin has a GF Score™ of 93/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Parker Hannifin's PEG Ratio compare to CMI and EMR?
According to the Industrial Products industry distribution chart, Parker Hannifin ranks #585 out of 1286 companies for PEG Ratio. This puts Parker Hannifin in the upper half of its industry. The industry median PEG Ratio is 1.87. Parker Hannifin's value of 1.64 is 12.3% below this benchmark. Historically, Parker Hannifin's own PEG Ratio has ranged from 0.69 to 438.40 over the past decade. While the company's 10-year median is 1.68 vs. the industry median of 1.87, Parker Hannifin has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.87, based on 1,286 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Parker Hannifin's current PEG Ratio of 1.64 is 12.3% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Parker Hannifin and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.87 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Parker Hannifin's current PEG Ratio is 1.64, which is near median its own 10-year median of 1.68. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Parker Hannifin stock overvalued right now?
Based on GuruFocus' analysis, Parker Hannifin (PH) is currently considered Significantly Overvalued. The stock's GF Value™ is $678.41, compared to a current price of $968.92 — trading 42.8% above its estimated fair value. The current PEG Ratio is 1.64, which is near median its 10-year median of 1.68 and 12.3% below the Industrial Products industry median of 1.87. Parker Hannifin's overall GF Score™ is 93/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Parker Hannifin (PH), the current PEG Ratio is 1.64 as of Jun. 27, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Parker Hannifin (PH) Overvalued in 2026?
Based on GuruFocus' analysis, Parker Hannifin stock appears to be overvalued.
The current stock price of $968.92 is trading 42.8% above its estimated GF Value™ of $678.41.
GuruFocus considers Parker Hannifin to be Significantly Overvalued.
Key valuation signals for PH:
PEG Ratio: 1.64 (near median its 10-year median of 1.68)
GF Value™: $678.41 vs. price of $968.92 (42.8% above fair value)
Industry Position: 12.3% below the Industrial Products median (#585 of 1286)
No single metric tells the full story. See the PH stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Parker Hannifin started out in 1917 as Parker Appliance, selling pneumatic brakes. Through the acquisition of branded components, the firm has expanded into aerospace engines, agricultural and construction machinery, freight and passenger vehicles, and industrial automation equipment. Within these larger systems, Parker sells a wide array of small, critical pieces such as hydraulic, electromechanical, climate control, and filtration components. Many of its products are designed to work together, resulting in a high rate of cross-selling.
93GF Score
Get the complete analysis for PH
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
PH has been successfully added to your 
