Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Feature Integration Technology's PEG Ratio or its related term are showing as below:
ROCO:4951'
s PEG Ratio Range Over the Past 10 Years
Min: 0.33 Med: 0.96 Max: 1.52
Current: 0.87
During the past 13 years, Feature Integration Technology's highest PEG Ratio was 1.52. The lowest was 0.33. And the median was 0.96.
ROCO:4951's PEG Ratio is ranked better than 85.71% of 329
companies
in the Semiconductors industry
Industry Median: 3.36
vs ROCO:4951: 0.87
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Feature Integration Technology (ROCO:4951) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Feature Integration Technology PEG Ratio Related Terms
Feature Integration Technology PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Semiconductors subindustry, Feature Integration Technology's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Feature Integration Technology PEG Ratio vs Semiconductors Industry
For the Semiconductors industry and Technology sector, Feature Integration Technology's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Feature Integration Technology's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Feature Integration Technology (ROCO:4951) has a PEG Ratio of 0.87 as of Jul. 23, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Feature Integration Technology and its competitors. This is near median its historical median of 0.96. Over the past decade, Feature Integration Technology's PEG Ratio has ranged from 0.33 to 1.52. According to the industry distribution chart, Feature Integration Technology ranks #47 out of 329 companies in the Semiconductors industry, placing it in the top 14.3%.
Is Feature Integration Technology's PEG Ratio too high?
Feature Integration Technology's current PEG Ratio of 0.87 is near median its 10-year median of 0.96. Over the past 10 years, this metric has ranged from a low of 0.33 to a high of 1.52. The Semiconductors industry median PEG Ratio is 3.36. Feature Integration Technology's value of 0.87 is 74.1% below this industry median. Based on the distribution chart, Feature Integration Technology ranks #47 out of 329 companies in the Semiconductors industry, which is in the top quartile — a strong position relative to peers. Overall, Feature Integration Technology has a GF Score™ of 83/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Feature Integration Technology's PEG Ratio compare to NVDA and AVGO?
According to the Semiconductors industry distribution chart, Feature Integration Technology ranks #47 out of 329 companies for PEG Ratio. This places Feature Integration Technology in the top 14% of its industry — outperforming the majority of peers. The industry median PEG Ratio is 3.36. Feature Integration Technology's value of 0.87 is 74.1% below this benchmark. Historically, Feature Integration Technology's own PEG Ratio has ranged from 0.33 to 1.52 over the past decade. While the company's 10-year median is 0.96 vs. the industry median of 3.36, Feature Integration Technology has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Semiconductors company?
The median PEG Ratio among Semiconductors companies is 3.36, based on 329 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Feature Integration Technology's current PEG Ratio of 0.87 is 74.1% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Feature Integration Technology and its competitors. For the Semiconductors industry, the median PEG Ratio is 3.36 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Feature Integration Technology's current PEG Ratio is 0.87, which is near median its own 10-year median of 0.96. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Feature Integration Technology stock overvalued right now?
Based on GuruFocus' analysis, Feature Integration Technology (ROCO:4951) is currently considered Fairly Valued. The stock's GF Value™ is NT$76.56, compared to a current price of NT$80.20 — trading 4.8% above its estimated fair value. The current PEG Ratio is 0.87, which is near median its 10-year median of 0.96 and 74.1% below the Semiconductors industry median of 3.36. Feature Integration Technology's overall GF Score™ is 83/100 with 1 warning sign to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Feature Integration Technology (ROCO:4951), the current PEG Ratio is 0.87 as of Jul. 23, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Feature Integration Technology (ROCO:4951) Overvalued in 2026?
Based on GuruFocus' analysis, Feature Integration Technology stock appears to be overvalued.
The current stock price of NT$80.20 is trading 4.8% above its estimated GF Value™ of NT$76.56.
GuruFocus considers Feature Integration Technology to be Fairly Valued.
Key valuation signals for ROCO:4951:
PEG Ratio: 0.87 (near median its 10-year median of 0.96)
GF Value™: NT$76.56 vs. price of NT$80.20 (4.8% above fair value)
Industry Position: 74.1% below the Semiconductors median (#47 of 329)
No single metric tells the full story. See the ROCO:4951 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Feature Integration Technology Business Description
Feature Integration Technology Inc is engaged in the design, marketing, sales, and manufacturing of integrated circuits and controllers. The company's product includes power management IC, embedded IC and memory logic, and interface controller. Its products are used in personal computers, computer peripheral products, and information appliances.
83GF Score
Get the complete analysis for ROCO:4951
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:4951 has been successfully added to your 
