Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Anhui Xinke New Materials Co's PEG Ratio or its related term are showing as below:
SHSE:600255'
s PEG Ratio Range Over the Past 10 Years
Min: 0.43 Med: 1.33 Max: 32.18
Current: 32.18
During the past 13 years, Anhui Xinke New Materials Co's highest PEG Ratio was 32.18. The lowest was 0.43. And the median was 1.33.
SHSE:600255's PEG Ratio is ranked worse than 95.51% of 312
companies
in the Metals & Mining industry
Industry Median: 1.16
vs SHSE:600255: 32.18
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Anhui Xinke New Materials Co (SHSE:600255) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Anhui Xinke New Materials Co PEG Ratio Related Terms
Anhui Xinke New Materials Co PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Copper subindustry, Anhui Xinke New Materials Co's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Anhui Xinke New Materials Co PEG Ratio vs Metals & Mining Industry
For the Metals & Mining industry and Basic Materials sector, Anhui Xinke New Materials Co's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Anhui Xinke New Materials Co's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Anhui Xinke New Materials Co (SHSE:600255) has a PEG Ratio of 32.18 as of Jul. 14, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Anhui Xinke New Materials Co and its competitors. This is 2320% above median its historical median of 1.33. Over the past decade, Anhui Xinke New Materials Co's PEG Ratio has ranged from 0.43 to 32.18. According to the industry distribution chart, Anhui Xinke New Materials Co ranks #298 out of 312 companies in the Metals & Mining industry, placing it in the top 95.5%.
Is Anhui Xinke New Materials Co's PEG Ratio too high?
Anhui Xinke New Materials Co's current PEG Ratio of 32.18 is 2320% above median its 10-year median of 1.33. Over the past 10 years, this metric has ranged from a low of 0.43 to a high of 32.18. The Metals & Mining industry median PEG Ratio is 1.16. Anhui Xinke New Materials Co's value of 32.18 is 2674.1% above this industry median. Based on the distribution chart, Anhui Xinke New Materials Co ranks #298 out of 312 companies in the Metals & Mining industry, which is in the bottom quartile relative to peers. Overall, Anhui Xinke New Materials Co has a GF Score™ of 64/100 and is considered Possible Value Trap, reflecting its overall financial health beyond just this single metric.
How does Anhui Xinke New Materials Co's PEG Ratio compare to SCCO and FCX?
According to the Metals & Mining industry distribution chart, Anhui Xinke New Materials Co ranks #298 out of 312 companies for PEG Ratio. This places Anhui Xinke New Materials Co in the lower half of its industry. The industry median PEG Ratio is 1.16. Anhui Xinke New Materials Co's value of 32.18 is 2674.1% above this benchmark. Historically, Anhui Xinke New Materials Co's own PEG Ratio has ranged from 0.43 to 32.18 over the past decade. While the company's 10-year median is 1.33 vs. the industry median of 1.16, Anhui Xinke New Materials Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Metals & Mining company?
The median PEG Ratio among Metals & Mining companies is 1.16, based on 312 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Anhui Xinke New Materials Co's current PEG Ratio of 32.18 is 2674.1% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Anhui Xinke New Materials Co and its competitors. For the Metals & Mining industry, the median PEG Ratio is 1.16 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Anhui Xinke New Materials Co's current PEG Ratio is 32.18, which is 2320% above median its own 10-year median of 1.33. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Anhui Xinke New Materials Co stock overvalued right now?
Based on GuruFocus' analysis, Anhui Xinke New Materials Co (SHSE:600255) is currently considered Possible Value Trap. The stock's GF Value™ is ¥4.59, compared to a current price of ¥3.08 — trading 32.9% below its estimated fair value. The current PEG Ratio is 32.18, which is 2320% above median its 10-year median of 1.33 and 2674.1% above the Metals & Mining industry median of 1.16. Anhui Xinke New Materials Co's overall GF Score™ is 64/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Anhui Xinke New Materials Co (SHSE:600255), the current PEG Ratio is 32.18 as of Jul. 14, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Anhui Xinke New Materials Co (SHSE:600255) Overvalued in 2026?
Based on GuruFocus' analysis, Anhui Xinke New Materials Co stock appears to be undervalued.
The current stock price of ¥3.08 is trading 32.9% below its estimated GF Value™ of ¥4.59.
GuruFocus considers Anhui Xinke New Materials Co to be Possible Value Trap.
Key valuation signals for SHSE:600255:
PEG Ratio: 32.18 (2320% above median its 10-year median of 1.33)
GF Value™: ¥4.59 vs. price of ¥3.08 (32.9% below fair value)
Industry Position: 2674.1% above the Metals & Mining median (#298 of 312)
No single metric tells the full story. See the SHSE:600255 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Anhui Xinke New Materials Co Ltd focuses on the research and development, production, and sales of high-performance, high-precision copper alloy plate and strip products. The products include high-precision brass, high copper, bronze, and white copper bare strips as well as their reflow tinned and hot-dip tinned strips; the products are widely used in integrated circuits, consumer electronics, new energy vehicles, LED, photovoltaic power, New generation of information technology, 5G, smart terminals and other industry fields.
64GF Score
Get the complete analysis for SHSE:600255
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
SHSE:600255 has been successfully added to your 
