Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
SHSE:600558'
s PEG Ratio Range Over the Past 10 Years
Min: 1.32 Med: 5.73 Max: 73.03
Current: 2.04
During the past 13 years, Atlantic China Welding Consumables's highest PEG Ratio was 73.03. The lowest was 1.32. And the median was 5.73.
SHSE:600558's PEG Ratio is ranked worse than 54.97% of 1277
companies
in the Industrial Products industry
Industry Median: 1.79
vs SHSE:600558: 2.04
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Atlantic China Welding Consumables (SHSE:600558) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Atlantic China Welding Consumables PEG Ratio Related Terms
Atlantic China Welding Consumables PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Atlantic China Welding Consumables PEG Ratio Chart
For the Specialty Industrial Machinery subindustry, Atlantic China Welding Consumables's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Atlantic China Welding Consumables PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Atlantic China Welding Consumables's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Atlantic China Welding Consumables's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Atlantic China Welding Consumables (SHSE:600558) has a PEG Ratio of 2.04 as of Jul. 23, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Atlantic China Welding Consumables and its competitors. This is 64% below median its historical median of 5.73. Over the past decade, Atlantic China Welding Consumables' PEG Ratio has ranged from 1.32 to 73.03. According to the industry distribution chart, Atlantic China Welding Consumables ranks #702 out of 1277 companies in the Industrial Products industry, placing it in the top 55%.
Is Atlantic China Welding Consumables' PEG Ratio too high?
Atlantic China Welding Consumables' current PEG Ratio of 2.04 is 64% below median its 10-year median of 5.73. Over the past 10 years, this metric has ranged from a low of 1.32 to a high of 73.03. The Industrial Products industry median PEG Ratio is 1.79. Atlantic China Welding Consumables' value of 2.04 is 14% above this industry median. Based on the distribution chart, Atlantic China Welding Consumables ranks #702 out of 1277 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Atlantic China Welding Consumables has a GF Score™ of 79/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Atlantic China Welding Consumables' PEG Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Atlantic China Welding Consumables ranks #702 out of 1277 companies for PEG Ratio. This places Atlantic China Welding Consumables in the lower half of its industry. The industry median PEG Ratio is 1.79. Atlantic China Welding Consumables' value of 2.04 is 14% above this benchmark. Historically, Atlantic China Welding Consumables' own PEG Ratio has ranged from 1.32 to 73.03 over the past decade. While the company's 10-year median is 5.73 vs. the industry median of 1.79, Atlantic China Welding Consumables has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.79, based on 1,277 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Atlantic China Welding Consumables's current PEG Ratio of 2.04 is 14% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Atlantic China Welding Consumables and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.79 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Atlantic China Welding Consumables's current PEG Ratio is 2.04, which is 64% below median its own 10-year median of 5.73. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Atlantic China Welding Consumables stock overvalued right now?
Based on GuruFocus' analysis, Atlantic China Welding Consumables (SHSE:600558) is currently considered Fairly Valued. The stock's GF Value™ is ¥4.68, compared to a current price of ¥4.71 — trading 0.6% above its estimated fair value. The current PEG Ratio is 2.04, which is 64% below median its 10-year median of 5.73 and 14% above the Industrial Products industry median of 1.79. Atlantic China Welding Consumables' overall GF Score™ is 79/100. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Atlantic China Welding Consumables (SHSE:600558), the current PEG Ratio is 2.04 as of Jul. 23, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Atlantic China Welding Consumables (SHSE:600558) Overvalued in 2026?
Based on GuruFocus' analysis, Atlantic China Welding Consumables stock appears to be overvalued.
The current stock price of ¥4.71 is trading 0.6% above its estimated GF Value™ of ¥4.68.
GuruFocus considers Atlantic China Welding Consumables to be Fairly Valued.
Key valuation signals for SHSE:600558:
PEG Ratio: 2.04 (64% below median its 10-year median of 5.73)
GF Value™: ¥4.68 vs. price of ¥4.71 (0.6% above fair value)
Industry Position: 14% above the Industrial Products median (#702 of 1277)
No single metric tells the full story. See the SHSE:600558 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Atlantic China Welding Consumables Business Description
Atlantic China Welding Consumables Inc is a welding consumable manufactory in China. The company's product consists of welding rods (carbon steel welding rods, low alloy steel welding rods, stainless steel welding rods, cladding welding rods, cast iron welding rods, nickel and nickel alloy welding rods, copper and copper alloy welding rods), welding wires (solid welding wires for gas shielded welding of MAG, MIG and TIG, flux-cored welding wires, non-ferrous metal welding wires, and submerged arc welding wires), and fluxes (various smelting and sintering fluxes for submerged arc welding and electro slag welding) with more than 700 varieties in three series.
79GF Score
Get the complete analysis for SHSE:600558
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
SHSE:600558 has been successfully added to your 
