Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Jiangsu Hengli Hydraulic CoSHSE:601100 +0.77%90 PEG Ratio is 35.75 as of Jul. 27, 2026, which is 4731% above its 10-year median of 0.74. GuruFocus rates SHSE:601100 with a GF Score™ of 90/100 and a GF Value™ of ¥90.52 (Modestly Overvalued). The stock has 2 warning signs investors should review. Among 1,282 Industrial Products companies, Jiangsu Hengli Hydraulic Co ranks worse than 96.26% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Jiangsu Hengli Hydraulic Co's PEG Ratio or its related term are showing as below:
SHSE:601100'
s PEG Ratio Range Over the Past 10 Years
Min: 0.22 Med: 0.74 Max: 300.61
Current: 35.75
During the past 13 years, Jiangsu Hengli Hydraulic Co's highest PEG Ratio was 300.61. The lowest was 0.22. And the median was 0.74.
SHSE:601100's PEG Ratio is ranked worse than 96.26% of 1282
companies
in the Industrial Products industry
Industry Median: 1.765
vs SHSE:601100: 35.75
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Jiangsu Hengli Hydraulic Co (SHSE:601100) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Jiangsu Hengli Hydraulic Co PEG Ratio Related Terms
Jiangsu Hengli Hydraulic Co PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, Jiangsu Hengli Hydraulic Co's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Jiangsu Hengli Hydraulic Co PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Jiangsu Hengli Hydraulic Co's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Jiangsu Hengli Hydraulic Co's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Jiangsu Hengli Hydraulic Co (SHSE:601100) has a PEG Ratio of 35.75 as of Jul. 27, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Jiangsu Hengli Hydraulic Co and its competitors. This is 4731% above median its historical median of 0.74. Over the past decade, Jiangsu Hengli Hydraulic Co's PEG Ratio has ranged from 0.22 to 300.61. According to the industry distribution chart, Jiangsu Hengli Hydraulic Co ranks #1234 out of 1282 companies in the Industrial Products industry, placing it in the top 96.3%.
Is Jiangsu Hengli Hydraulic Co's PEG Ratio too high?
Jiangsu Hengli Hydraulic Co's current PEG Ratio of 35.75 is 4731% above median its 10-year median of 0.74. Over the past 10 years, this metric has ranged from a low of 0.22 to a high of 300.61. The Industrial Products industry median PEG Ratio is 1.77. Jiangsu Hengli Hydraulic Co's value of 35.75 is 1925.5% above this industry median. Based on the distribution chart, Jiangsu Hengli Hydraulic Co ranks #1234 out of 1282 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Jiangsu Hengli Hydraulic Co has a GF Score™ of 90/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Jiangsu Hengli Hydraulic Co's PEG Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Jiangsu Hengli Hydraulic Co ranks #1234 out of 1282 companies for PEG Ratio. This places Jiangsu Hengli Hydraulic Co in the lower half of its industry. The industry median PEG Ratio is 1.77. Jiangsu Hengli Hydraulic Co's value of 35.75 is 1925.5% above this benchmark. Historically, Jiangsu Hengli Hydraulic Co's own PEG Ratio has ranged from 0.22 to 300.61 over the past decade. While the company's 10-year median is 0.74 vs. the industry median of 1.77, Jiangsu Hengli Hydraulic Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.77, based on 1,282 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Jiangsu Hengli Hydraulic Co's current PEG Ratio of 35.75 is 1925.5% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Jiangsu Hengli Hydraulic Co and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.77 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Jiangsu Hengli Hydraulic Co's current PEG Ratio is 35.75, which is 4731% above median its own 10-year median of 0.74. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Jiangsu Hengli Hydraulic Co stock overvalued right now?
Based on GuruFocus' analysis, Jiangsu Hengli Hydraulic Co (SHSE:601100) is currently considered Modestly Overvalued. The stock's GF Value™ is ¥90.52, compared to a current price of ¥106.29 — trading 17.4% above its estimated fair value. The current PEG Ratio is 35.75, which is 4731% above median its 10-year median of 0.74 and 1925.5% above the Industrial Products industry median of 1.77. Jiangsu Hengli Hydraulic Co's overall GF Score™ is 90/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Jiangsu Hengli Hydraulic Co (SHSE:601100), the current PEG Ratio is 35.75 as of Jul. 27, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Jiangsu Hengli Hydraulic Co (SHSE:601100) Overvalued in 2026?
Based on GuruFocus' analysis, Jiangsu Hengli Hydraulic Co stock appears to be overvalued.
The current stock price of ¥106.29 is trading 17.4% above its estimated GF Value™ of ¥90.52.
GuruFocus considers Jiangsu Hengli Hydraulic Co to be Modestly Overvalued.
Key valuation signals for SHSE:601100:
PEG Ratio: 35.75 (4731% above median its 10-year median of 0.74)
GF Value™: ¥90.52 vs. price of ¥106.29 (17.4% above fair value)
Industry Position: 1925.5% above the Industrial Products median (#1234 of 1282)
No single metric tells the full story. See the SHSE:601100 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Hengli Hydraulic is a leading Chinese hydraulic component supplier. It designs, manufactures, and sells hydraulic cylinder, pump, valve, and motor products. Hengli's products are widely used in heavy machinery. It is the largest supplier of excavator hydraulic cylinders in the world, holding about 30% global market share.
90GF Score
Get the complete analysis for SHSE:601100
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
SHSE:601100 has been successfully added to your 
