Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
SHSE:601611's PEG Ratio is ranked worse than 61.71% of 679
companies
in the Construction industry
Industry Median: 1.07
vs SHSE:601611: 1.59
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
China Nuclear Engineeringnstruction (SHSE:601611) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
China Nuclear Engineeringnstruction PEG Ratio Related Terms
China Nuclear Engineeringnstruction PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
China Nuclear Engineeringnstruction PEG Ratio Chart
SHSE:601611 vs PWR, FIX, EME: PEG Ratio Comparison
For the Engineering & Construction subindustry, China Nuclear Engineeringnstruction's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
China Nuclear Engineeringnstruction PEG Ratio vs Construction Industry
For the Construction industry and Industrials sector, China Nuclear Engineeringnstruction's PEG Ratio distribution charts can be found below:
* The bar in red indicates where China Nuclear Engineeringnstruction's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
China Nuclear Engineeringnstruction (SHSE:601611) has a PEG Ratio of 1.59 as of Jul. 21, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on China Nuclear Engineeringnstruction and its competitors. This is 148% above median its historical median of 0.64. Over the past decade, China Nuclear Engineeringnstruction's PEG Ratio has ranged from 0.37 to 7.36. According to the industry distribution chart, China Nuclear Engineeringnstruction ranks #419 out of 679 companies in the Construction industry, placing it in the top 61.7%.
Is China Nuclear Engineeringnstruction's PEG Ratio too high?
China Nuclear Engineeringnstruction's current PEG Ratio of 1.59 is 148% above median its 10-year median of 0.64. Over the past 10 years, this metric has ranged from a low of 0.37 to a high of 7.36. The Construction industry median PEG Ratio is 1.07. China Nuclear Engineeringnstruction's value of 1.59 is 48.6% above this industry median. Based on the distribution chart, China Nuclear Engineeringnstruction ranks #419 out of 679 companies in the Construction industry, which is below the industry midpoint. Overall, China Nuclear Engineeringnstruction has a GF Score™ of 68/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does China Nuclear Engineeringnstruction's PEG Ratio compare to PWR and FIX?
According to the Construction industry distribution chart, China Nuclear Engineeringnstruction ranks #419 out of 679 companies for PEG Ratio. This places China Nuclear Engineeringnstruction in the lower half of its industry. The industry median PEG Ratio is 1.07. China Nuclear Engineeringnstruction's value of 1.59 is 48.6% above this benchmark. Historically, China Nuclear Engineeringnstruction's own PEG Ratio has ranged from 0.37 to 7.36 over the past decade. While the company's 10-year median is 0.64 vs. the industry median of 1.07, China Nuclear Engineeringnstruction has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Construction company?
The median PEG Ratio among Construction companies is 1.07, based on 679 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. China Nuclear Engineeringnstruction's current PEG Ratio of 1.59 is 48.6% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on China Nuclear Engineeringnstruction and its competitors. For the Construction industry, the median PEG Ratio is 1.07 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. China Nuclear Engineeringnstruction's current PEG Ratio is 1.59, which is 148% above median its own 10-year median of 0.64. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is China Nuclear Engineeringnstruction stock overvalued right now?
Based on GuruFocus' analysis, China Nuclear Engineeringnstruction (SHSE:601611) is currently considered Modestly Overvalued. The stock's GF Value™ is ¥8.34, compared to a current price of ¥10.09 — trading 21% above its estimated fair value. The current PEG Ratio is 1.59, which is 148% above median its 10-year median of 0.64 and 48.6% above the Construction industry median of 1.07. China Nuclear Engineeringnstruction's overall GF Score™ is 68/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For China Nuclear Engineeringnstruction (SHSE:601611), the current PEG Ratio is 1.59 as of Jul. 21, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is China Nuclear Engineeringnstruction (SHSE:601611) Overvalued in 2026?
Based on GuruFocus' analysis, China Nuclear Engineeringnstruction stock appears to be overvalued.
The current stock price of ¥10.09 is trading 21% above its estimated GF Value™ of ¥8.34.
GuruFocus considers China Nuclear Engineeringnstruction to be Modestly Overvalued.
Key valuation signals for SHSE:601611:
PEG Ratio: 1.59 (148% above median its 10-year median of 0.64)
GF Value™: ¥8.34 vs. price of ¥10.09 (21% above fair value)
Industry Position: 48.6% above the Construction median (#419 of 679)
No single metric tells the full story. See the SHSE:601611 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
China Nuclear Engineeringnstruction Business Description
China Nuclear Engineering & Construction Corp Ltd is engaged in military engineering, nuclear power engineering, and industrial and civil engineering construction. Its business scope includes investment management, general contracting, engineering construction contracting, engineering survey and design, and engineering and technical consulting.
68GF Score
Get the complete analysis for SHSE:601611
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
SHSE:601611 has been successfully added to your 
