Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Jiangyin Jianghua Microelectronics Materials Co (SHSE:603078) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Jiangyin Jianghua Microelectronics Materials Co PEG Ratio Related Terms
Jiangyin Jianghua Microelectronics Materials Co PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Jiangyin Jianghua Microelectronics Materials Co PEG Ratio Chart
Jiangyin Jianghua Microelectronics Materials Co Annual Data
SHSE:603078 vs AMAT, LRCX, KLAC: PEG Ratio Comparison
For the Semiconductor Equipment & Materials subindustry, Jiangyin Jianghua Microelectronics Materials Co's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Jiangyin Jianghua Microelectronics Materials Co PEG Ratio vs Semiconductors Industry
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Jiangyin Jianghua Microelectronics Materials Co (SHSE:603078) has a PEG Ratio of 6.25 as of Aug. 03, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Jiangyin Jianghua Microelectronics Materials Co and its competitors. This is 43% below median its historical median of 10.91. Over the past decade, Jiangyin Jianghua Microelectronics Materials Co's PEG Ratio has ranged from 2.49 to 252.40. According to the industry distribution chart, Jiangyin Jianghua Microelectronics Materials Co ranks #242 out of 328 companies in the Semiconductors industry, placing it in the top 73.8%.
Is Jiangyin Jianghua Microelectronics Materials Co's PEG Ratio too high?
Jiangyin Jianghua Microelectronics Materials Co's current PEG Ratio of 6.25 is 43% below median its 10-year median of 10.91. Over the past 10 years, this metric has ranged from a low of 2.49 to a high of 252.40. The Semiconductors industry median PEG Ratio is 2.85. Jiangyin Jianghua Microelectronics Materials Co's value of 6.25 is 119.7% above this industry median. Based on the distribution chart, Jiangyin Jianghua Microelectronics Materials Co ranks #242 out of 328 companies in the Semiconductors industry, which is below the industry midpoint. Overall, Jiangyin Jianghua Microelectronics Materials Co has a GF Score™ of 72/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Jiangyin Jianghua Microelectronics Materials Co's PEG Ratio compare to AMAT and LRCX?
According to the Semiconductors industry distribution chart, Jiangyin Jianghua Microelectronics Materials Co ranks #242 out of 328 companies for PEG Ratio. This places Jiangyin Jianghua Microelectronics Materials Co in the lower half of its industry. The industry median PEG Ratio is 2.85. Jiangyin Jianghua Microelectronics Materials Co's value of 6.25 is 119.7% above this benchmark. Historically, Jiangyin Jianghua Microelectronics Materials Co's own PEG Ratio has ranged from 2.49 to 252.40 over the past decade. While the company's 10-year median is 10.91 vs. the industry median of 2.85, Jiangyin Jianghua Microelectronics Materials Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Semiconductors company?
The median PEG Ratio among Semiconductors companies is 2.85, based on 328 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Jiangyin Jianghua Microelectronics Materials Co's current PEG Ratio of 6.25 is 119.7% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Jiangyin Jianghua Microelectronics Materials Co and its competitors. For the Semiconductors industry, the median PEG Ratio is 2.85 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Jiangyin Jianghua Microelectronics Materials Co's current PEG Ratio is 6.25, which is 43% below median its own 10-year median of 10.91. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Jiangyin Jianghua Microelectronics Materials Co stock overvalued right now?
Based on GuruFocus' analysis, Jiangyin Jianghua Microelectronics Materials Co (SHSE:603078) is currently considered Modestly Overvalued. The stock's GF Value™ is ¥21.13, compared to a current price of ¥26.92 — trading 27.4% above its estimated fair value. The current PEG Ratio is 6.25, which is 43% below median its 10-year median of 10.91 and 119.7% above the Semiconductors industry median of 2.85. Jiangyin Jianghua Microelectronics Materials Co's overall GF Score™ is 72/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Jiangyin Jianghua Microelectronics Materials Co (SHSE:603078), the current PEG Ratio is 6.25 as of Aug. 03, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Jiangyin Jianghua Microelectronics Materials Co (SHSE:603078) Overvalued in 2026?
Based on GuruFocus' analysis, Jiangyin Jianghua Microelectronics Materials Co stock appears to be overvalued.
The current stock price of ¥26.92 is trading 27.4% above its estimated GF Value™ of ¥21.13.
GuruFocus considers Jiangyin Jianghua Microelectronics Materials Co to be Modestly Overvalued.
Key valuation signals for SHSE:603078:
PEG Ratio: 6.25 (43% below median its 10-year median of 10.91)
GF Value™: ¥21.13 vs. price of ¥26.92 (27.4% above fair value)
Industry Position: 119.7% above the Semiconductors median (#242 of 328)
No single metric tells the full story. See the SHSE:603078 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Jiangyin Jianghua Microelectronics Materials Co Ltd is a Chinese company engaged in the production of Semiconductors like TR and IC, Crystalline silicon solar such as solar PV, FPD flat panel display products including TFT-LCD, CF, TP, OLED, PDP, and others, and special wet chemicals required in the manufacturing of LED, silicon, and lithium batteries, among others.
72GF Score
Get the complete analysis for SHSE:603078
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
SHSE:603078 has been successfully added to your 
