Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
SHSE:603111's PEG Ratio is ranked worse than 97.31% of 446
companies
in the Transportation industry
Industry Median: 1.185
vs SHSE:603111: 23.00
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Nanjing Kangni Mechanical & Electrical Co (SHSE:603111) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Nanjing Kangni Mechanical & Electrical Co PEG Ratio Related Terms
Nanjing Kangni Mechanical & Electrical Co PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Nanjing Kangni Mechanical & Electrical Co PEG Ratio Chart
Nanjing Kangni Mechanical & Electrical Co Annual Data
SHSE:603111 vs UNP, CSX, NSC: PEG Ratio Comparison
For the Railroads subindustry, Nanjing Kangni Mechanical & Electrical Co's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Nanjing Kangni Mechanical & Electrical Co PEG Ratio vs Transportation Industry
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Nanjing Kangni Mechanical & Electrical Co (SHSE:603111) has a PEG Ratio of 23.00 as of Jul. 25, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Nanjing Kangni Mechanical & Electrical Co and its competitors. This is 2514% above median its historical median of 0.88. Over the past decade, Nanjing Kangni Mechanical & Electrical Co's PEG Ratio has ranged from 0.47 to 23.00. According to the industry distribution chart, Nanjing Kangni Mechanical & Electrical Co ranks #434 out of 446 companies in the Transportation industry, placing it in the top 97.3%.
Is Nanjing Kangni Mechanical & Electrical Co's PEG Ratio too high?
Nanjing Kangni Mechanical & Electrical Co's current PEG Ratio of 23.00 is 2514% above median its 10-year median of 0.88. Over the past 10 years, this metric has ranged from a low of 0.47 to a high of 23.00. The Transportation industry median PEG Ratio is 1.19. Nanjing Kangni Mechanical & Electrical Co's value of 23.00 is 1840.9% above this industry median. Based on the distribution chart, Nanjing Kangni Mechanical & Electrical Co ranks #434 out of 446 companies in the Transportation industry, which is in the bottom quartile relative to peers. Overall, Nanjing Kangni Mechanical & Electrical Co has a GF Score™ of 74/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Nanjing Kangni Mechanical & Electrical Co's PEG Ratio compare to UNP and CSX?
According to the Transportation industry distribution chart, Nanjing Kangni Mechanical & Electrical Co ranks #434 out of 446 companies for PEG Ratio. This places Nanjing Kangni Mechanical & Electrical Co in the lower half of its industry. The industry median PEG Ratio is 1.19. Nanjing Kangni Mechanical & Electrical Co's value of 23.00 is 1840.9% above this benchmark. Historically, Nanjing Kangni Mechanical & Electrical Co's own PEG Ratio has ranged from 0.47 to 23.00 over the past decade. While the company's 10-year median is 0.88 vs. the industry median of 1.19, Nanjing Kangni Mechanical & Electrical Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Transportation company?
The median PEG Ratio among Transportation companies is 1.19, based on 446 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Nanjing Kangni Mechanical & Electrical Co's current PEG Ratio of 23.00 is 1840.9% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Nanjing Kangni Mechanical & Electrical Co and its competitors. For the Transportation industry, the median PEG Ratio is 1.19 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Nanjing Kangni Mechanical & Electrical Co's current PEG Ratio is 23.00, which is 2514% above median its own 10-year median of 0.88. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Nanjing Kangni Mechanical & Electrical Co stock overvalued right now?
Based on GuruFocus' analysis, Nanjing Kangni Mechanical & Electrical Co (SHSE:603111) is currently considered Modestly Undervalued. The stock's GF Value™ is ¥7.77, compared to a current price of ¥5.59 — trading 28.1% below its estimated fair value. The current PEG Ratio is 23.00, which is 2514% above median its 10-year median of 0.88 and 1840.9% above the Transportation industry median of 1.19. Nanjing Kangni Mechanical & Electrical Co's overall GF Score™ is 74/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Nanjing Kangni Mechanical & Electrical Co (SHSE:603111), the current PEG Ratio is 23.00 as of Jul. 25, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Nanjing Kangni Mechanical & Electrical Co (SHSE:603111) Overvalued in 2026?
Based on GuruFocus' analysis, Nanjing Kangni Mechanical & Electrical Co stock appears to be undervalued.
The current stock price of ¥5.59 is trading 28.1% below its estimated GF Value™ of ¥7.77.
GuruFocus considers Nanjing Kangni Mechanical & Electrical Co to be Modestly Undervalued.
Key valuation signals for SHSE:603111:
PEG Ratio: 23.00 (2514% above median its 10-year median of 0.88)
GF Value™: ¥7.77 vs. price of ¥5.59 (28.1% below fair value)
Industry Position: 1840.9% above the Transportation median (#434 of 446)
No single metric tells the full story. See the SHSE:603111 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Nanjing Kangni Mechanical & Electrical Co Business Description
Nanjing Kangni Mechanical & Electrical Co Ltd is engaged in research and development, manufacturing and maintenance of railway vehicle door system. It has cooperated with car builders such as Bombardier, Alstom, and Siemens to sell products all over the world, including France, Canada, Turkey, Singapore, Argentina, America, Saudi Arabia and Brazil. It also provides other a full suite of related products such as interior fittings, power connectors, platform screen doors, new energy products for automobile industry and precision machining equipment.
74GF Score
Get the complete analysis for SHSE:603111
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
SHSE:603111 has been successfully added to your 
