Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
SHSE:603201's PEG Ratio is ranked worse than 77.28% of 669
companies
in the Vehicles & Parts industry
Industry Median: 1.15
vs SHSE:603201: 3.18
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Changshu Tongrun Auto Accessory Co (SHSE:603201) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Changshu Tongrun Auto Accessory Co PEG Ratio Related Terms
Changshu Tongrun Auto Accessory Co PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Changshu Tongrun Auto Accessory Co PEG Ratio Chart
For the Auto Parts subindustry, Changshu Tongrun Auto Accessory Co's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Changshu Tongrun Auto Accessory Co PEG Ratio vs Vehicles & Parts Industry
For the Vehicles & Parts industry and Consumer Cyclical sector, Changshu Tongrun Auto Accessory Co's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Changshu Tongrun Auto Accessory Co's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Changshu Tongrun Auto Accessory Co (SHSE:603201) has a PEG Ratio of 3.19 as of Jul. 17, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Changshu Tongrun Auto Accessory Co and its competitors. This is 180% above median its historical median of 1.14. Over the past decade, Changshu Tongrun Auto Accessory Co's PEG Ratio has ranged from 0.76 to 3.25. According to the industry distribution chart, Changshu Tongrun Auto Accessory Co ranks #517 out of 669 companies in the Vehicles & Parts industry, placing it in the top 77.3%.
Is Changshu Tongrun Auto Accessory Co's PEG Ratio too high?
Changshu Tongrun Auto Accessory Co's current PEG Ratio of 3.19 is 180% above median its 10-year median of 1.14. Over the past 10 years, this metric has ranged from a low of 0.76 to a high of 3.25. The Vehicles & Parts industry median PEG Ratio is 1.15. Changshu Tongrun Auto Accessory Co's value of 3.19 is 177.4% above this industry median. Based on the distribution chart, Changshu Tongrun Auto Accessory Co ranks #517 out of 669 companies in the Vehicles & Parts industry, which is in the bottom quartile relative to peers. Overall, Changshu Tongrun Auto Accessory Co has a GF Score™ of 82/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Changshu Tongrun Auto Accessory Co's PEG Ratio compare to ORLY and AZO?
According to the Vehicles & Parts industry distribution chart, Changshu Tongrun Auto Accessory Co ranks #517 out of 669 companies for PEG Ratio. This places Changshu Tongrun Auto Accessory Co in the lower half of its industry. The industry median PEG Ratio is 1.15. Changshu Tongrun Auto Accessory Co's value of 3.19 is 177.4% above this benchmark. Historically, Changshu Tongrun Auto Accessory Co's own PEG Ratio has ranged from 0.76 to 3.25 over the past decade. While the company's 10-year median is 1.14 vs. the industry median of 1.15, Changshu Tongrun Auto Accessory Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Vehicles & Parts company?
The median PEG Ratio among Vehicles & Parts companies is 1.15, based on 669 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Changshu Tongrun Auto Accessory Co's current PEG Ratio of 3.19 is 177.4% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Changshu Tongrun Auto Accessory Co and its competitors. For the Vehicles & Parts industry, the median PEG Ratio is 1.15 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Changshu Tongrun Auto Accessory Co's current PEG Ratio is 3.19, which is 180% above median its own 10-year median of 1.14. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Changshu Tongrun Auto Accessory Co stock overvalued right now?
Based on GuruFocus' analysis, Changshu Tongrun Auto Accessory Co (SHSE:603201) is currently considered Modestly Undervalued. The stock's GF Value™ is ¥19.81, compared to a current price of ¥17.83 — trading 10% below its estimated fair value. The current PEG Ratio is 3.19, which is 180% above median its 10-year median of 1.14 and 177.4% above the Vehicles & Parts industry median of 1.15. Changshu Tongrun Auto Accessory Co's overall GF Score™ is 82/100 with 1 warning sign to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Changshu Tongrun Auto Accessory Co (SHSE:603201), the current PEG Ratio is 3.19 as of Jul. 17, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Changshu Tongrun Auto Accessory Co (SHSE:603201) Overvalued in 2026?
Based on GuruFocus' analysis, Changshu Tongrun Auto Accessory Co stock appears to be undervalued.
The current stock price of ¥17.83 is trading 10% below its estimated GF Value™ of ¥19.81.
GuruFocus considers Changshu Tongrun Auto Accessory Co to be Modestly Undervalued.
Key valuation signals for SHSE:603201:
PEG Ratio: 3.19 (180% above median its 10-year median of 1.14)
GF Value™: ¥19.81 vs. price of ¥17.83 (10% below fair value)
Industry Position: 177.4% above the Vehicles & Parts median (#517 of 669)
No single metric tells the full story. See the SHSE:603201 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Changshu Tongrun Auto Accessory Co Business Description
Changshu Tongrun Auto Accessory Co Ltd is engaged in the research and development, manufacturing, and sales of various jacks and their extended products. The company's main products include commercial jacks, vehicle-mounted jacks, professional jacks, lifts, and other automotive maintenance equipment and tools.
82GF Score
Get the complete analysis for SHSE:603201
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
SHSE:603201 has been successfully added to your 
