Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Qijing Machinery CoSHSE:603677 +0.30%67 PEG Ratio is 54.57 as of Aug. 06, 2026, which is 10% above its 10-year median of 49.56. GuruFocus rates SHSE:603677 with a GF Score™ of 67/100 and a GF Value™ of ¥16.04 (Modestly Undervalued). The stock has 6 warning signs investors should review. Among 672 Vehicles & Parts companies, Qijing Machinery Co ranks worse than 98.36% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Qijing Machinery Co's PEG Ratio or its related term are showing as below:
SHSE:603677'
s PEG Ratio Range Over the Past 10 Years
Min: 43.3 Med: 49.56 Max: 54.84
Current: 54.57
During the past 13 years, Qijing Machinery Co's highest PEG Ratio was 54.84. The lowest was 43.30. And the median was 49.56.
SHSE:603677's PEG Ratio is ranked worse than 98.36% of 672
companies
in the Vehicles & Parts industry
Industry Median: 1.155
vs SHSE:603677: 54.57
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Qijing Machinery Co (SHSE:603677) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Qijing Machinery Co PEG Ratio Related Terms
Qijing Machinery Co PEG Ratio Historical Data
* Premium members only.
The historical data trend for Qijing Machinery Co's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Auto Parts subindustry, Qijing Machinery Co's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Qijing Machinery Co PEG Ratio vs Vehicles & Parts Industry
For the Vehicles & Parts industry and Consumer Cyclical sector, Qijing Machinery Co's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Qijing Machinery Co's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Qijing Machinery Co (SHSE:603677) has a PEG Ratio of 54.57 as of Aug. 06, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Qijing Machinery Co and its competitors. This is 10% above median its historical median of 49.56. Over the past decade, Qijing Machinery Co's PEG Ratio has ranged from 43.30 to 54.84. According to the industry distribution chart, Qijing Machinery Co ranks #661 out of 672 companies in the Vehicles & Parts industry, placing it in the top 98.4%.
Is Qijing Machinery Co's PEG Ratio too high?
Qijing Machinery Co's current PEG Ratio of 54.57 is 10% above median its 10-year median of 49.56. Over the past 10 years, this metric has ranged from a low of 43.30 to a high of 54.84. The Vehicles & Parts industry median PEG Ratio is 1.16. Qijing Machinery Co's value of 54.57 is 4624.7% above this industry median. Based on the distribution chart, Qijing Machinery Co ranks #661 out of 672 companies in the Vehicles & Parts industry, which is in the bottom quartile relative to peers. Overall, Qijing Machinery Co has a GF Score™ of 67/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Qijing Machinery Co's PEG Ratio compare to ORLY and AZO?
According to the Vehicles & Parts industry distribution chart, Qijing Machinery Co ranks #661 out of 672 companies for PEG Ratio. This places Qijing Machinery Co in the lower half of its industry. The industry median PEG Ratio is 1.16. Qijing Machinery Co's value of 54.57 is 4624.7% above this benchmark. Historically, Qijing Machinery Co's own PEG Ratio has ranged from 43.30 to 54.84 over the past decade. While the company's 10-year median is 49.56 vs. the industry median of 1.16, Qijing Machinery Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Vehicles & Parts company?
The median PEG Ratio among Vehicles & Parts companies is 1.16, based on 672 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Qijing Machinery Co's current PEG Ratio of 54.57 is 4624.7% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Qijing Machinery Co and its competitors. For the Vehicles & Parts industry, the median PEG Ratio is 1.16 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Qijing Machinery Co's current PEG Ratio is 54.57, which is 10% above median its own 10-year median of 49.56. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Qijing Machinery Co stock overvalued right now?
Based on GuruFocus' analysis, Qijing Machinery Co (SHSE:603677) is currently considered Modestly Undervalued. The stock's GF Value™ is ¥16.04, compared to a current price of ¥13.31 — trading 17% below its estimated fair value. The current PEG Ratio is 54.57, which is 10% above median its 10-year median of 49.56 and 4624.7% above the Vehicles & Parts industry median of 1.16. Qijing Machinery Co's overall GF Score™ is 67/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Qijing Machinery Co (SHSE:603677), the current PEG Ratio is 54.57 as of Aug. 06, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Qijing Machinery Co (SHSE:603677) Overvalued in 2026?
Based on GuruFocus' analysis, Qijing Machinery Co stock appears to be undervalued.
The current stock price of ¥13.31 is trading 17% below its estimated GF Value™ of ¥16.04.
GuruFocus considers Qijing Machinery Co to be Modestly Undervalued.
Key valuation signals for SHSE:603677:
PEG Ratio: 54.57 (10% above median its 10-year median of 49.56)
GF Value™: ¥16.04 vs. price of ¥13.31 (17% below fair value)
Industry Position: 4624.7% above the Vehicles & Parts median (#661 of 672)
No single metric tells the full story. See the SHSE:603677 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Qijing Machinery Co Ltd is a China based manufacturing company focused on the fine machining process. It is engaged in the business of designing, manufacturing and selling of washing machine gearcase, home appliance parts, auto parts, and power tools.
67GF Score
Get the complete analysis for SHSE:603677
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
SHSE:603677 has been successfully added to your 
