Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
SHSE:603876'
s PEG Ratio Range Over the Past 10 Years
Min: 0.5 Med: 0.92 Max: 113.87
Current: 2.46
During the past 12 years, Jiangsu Dingsheng New Material JSC's highest PEG Ratio was 113.87. The lowest was 0.50. And the median was 0.92.
SHSE:603876's PEG Ratio is ranked worse than 70.7% of 314
companies
in the Metals & Mining industry
Industry Median: 1.155
vs SHSE:603876: 2.46
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Jiangsu Dingsheng New Material JSC (SHSE:603876) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Jiangsu Dingsheng New Material JSC PEG Ratio Related Terms
Jiangsu Dingsheng New Material JSC PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Jiangsu Dingsheng New Material JSC PEG Ratio Chart
For the Aluminum subindustry, Jiangsu Dingsheng New Material JSC's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Jiangsu Dingsheng New Material JSC PEG Ratio vs Metals & Mining Industry
For the Metals & Mining industry and Basic Materials sector, Jiangsu Dingsheng New Material JSC's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Jiangsu Dingsheng New Material JSC's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Jiangsu Dingsheng New Material JSC (SHSE:603876) has a PEG Ratio of 2.46 as of Jul. 21, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Jiangsu Dingsheng New Material JSC and its competitors. This is 167% above median its historical median of 0.92. Over the past decade, Jiangsu Dingsheng New Material JSC's PEG Ratio has ranged from 0.50 to 113.87. According to the industry distribution chart, Jiangsu Dingsheng New Material JSC ranks #222 out of 314 companies in the Metals & Mining industry, placing it in the top 70.7%.
Is Jiangsu Dingsheng New Material JSC's PEG Ratio too high?
Jiangsu Dingsheng New Material JSC's current PEG Ratio of 2.46 is 167% above median its 10-year median of 0.92. Over the past 10 years, this metric has ranged from a low of 0.50 to a high of 113.87. The Metals & Mining industry median PEG Ratio is 1.16. Jiangsu Dingsheng New Material JSC's value of 2.46 is 113% above this industry median. Based on the distribution chart, Jiangsu Dingsheng New Material JSC ranks #222 out of 314 companies in the Metals & Mining industry, which is below the industry midpoint. Overall, Jiangsu Dingsheng New Material JSC has a GF Score™ of 70/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Jiangsu Dingsheng New Material JSC's PEG Ratio compare to AA?
According to the Metals & Mining industry distribution chart, Jiangsu Dingsheng New Material JSC ranks #222 out of 314 companies for PEG Ratio. This places Jiangsu Dingsheng New Material JSC in the lower half of its industry. The industry median PEG Ratio is 1.16. Jiangsu Dingsheng New Material JSC's value of 2.46 is 113% above this benchmark. Historically, Jiangsu Dingsheng New Material JSC's own PEG Ratio has ranged from 0.50 to 113.87 over the past decade. While the company's 10-year median is 0.92 vs. the industry median of 1.16, Jiangsu Dingsheng New Material JSC has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Metals & Mining company?
The median PEG Ratio among Metals & Mining companies is 1.16, based on 314 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Jiangsu Dingsheng New Material JSC's current PEG Ratio of 2.46 is 113% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Jiangsu Dingsheng New Material JSC and its competitors. For the Metals & Mining industry, the median PEG Ratio is 1.16 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Jiangsu Dingsheng New Material JSC's current PEG Ratio is 2.46, which is 167% above median its own 10-year median of 0.92. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Jiangsu Dingsheng New Material JSC stock overvalued right now?
Based on GuruFocus' analysis, Jiangsu Dingsheng New Material JSC (SHSE:603876) is currently considered Significantly Overvalued. The stock's GF Value™ is ¥12.94, compared to a current price of ¥19.62 — trading 51.6% above its estimated fair value. The current PEG Ratio is 2.46, which is 167% above median its 10-year median of 0.92 and 113% above the Metals & Mining industry median of 1.16. Jiangsu Dingsheng New Material JSC's overall GF Score™ is 70/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Jiangsu Dingsheng New Material JSC (SHSE:603876), the current PEG Ratio is 2.46 as of Jul. 21, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Jiangsu Dingsheng New Material JSC (SHSE:603876) Overvalued in 2026?
Based on GuruFocus' analysis, Jiangsu Dingsheng New Material JSC stock appears to be overvalued.
The current stock price of ¥19.62 is trading 51.6% above its estimated GF Value™ of ¥12.94.
GuruFocus considers Jiangsu Dingsheng New Material JSC to be Significantly Overvalued.
Key valuation signals for SHSE:603876:
PEG Ratio: 2.46 (167% above median its 10-year median of 0.92)
GF Value™: ¥12.94 vs. price of ¥19.62 (51.6% above fair value)
Industry Position: 113% above the Metals & Mining median (#222 of 314)
No single metric tells the full story. See the SHSE:603876 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Jiangsu Dingsheng New Material JSC Business Description
Jiangsu Dingsheng New Material JSC Ltd is engaged in the manufacturing of aluminum and Aluminum Alloy plate, belt, foil and its deep processing products of provincial high-tech enterprise. Its products include strip, foil and coating material, deep processed products such as aluminum oxide board, cable foil, air conditioner foil, decorative building material aluminum foil, air conditioner refrigerator evaporator, and condenser.
70GF Score
Get the complete analysis for SHSE:603876
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
SHSE:603876 has been successfully added to your 
