Chiu Ting Machinery CoTPE:1539 72 PEG Ratio is 377.38 as of Jul. 10, 2026, which is 53811% above its 10-year median of 0.70. GuruFocus rates TPE:1539 with a GF Score™ of 72/100 and a GF Value™ of NT$17.35 (Fairly Valued). The stock has 4 warning signs investors should review. Among 1,278 Industrial Products companies, Chiu Ting Machinery Co ranks worse than 99.77% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Chiu Ting Machinery Co's PEG Ratio or its related term are showing as below:
TPE:1539'
s PEG Ratio Range Over the Past 10 Years
Min: 0.1 Med: 0.7 Max: 383.35
Current: 377.4
During the past 13 years, Chiu Ting Machinery Co's highest PEG Ratio was 383.35. The lowest was 0.10. And the median was 0.70.
TPE:1539's PEG Ratio is ranked worse than 99.77% of 1278
companies
in the Industrial Products industry
Industry Median: 1.8
vs TPE:1539: 377.40
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Chiu Ting Machinery Co (TPE:1539) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, Chiu Ting Machinery Co's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Chiu Ting Machinery Co PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Chiu Ting Machinery Co's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Chiu Ting Machinery Co's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Chiu Ting Machinery Co (TPE:1539) has a PEG Ratio of 377.38 as of Jul. 10, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Chiu Ting Machinery Co and its competitors. This is 53811% above median its historical median of 0.70. Over the past decade, Chiu Ting Machinery Co's PEG Ratio has ranged from 0.10 to 383.35. According to the industry distribution chart, Chiu Ting Machinery Co ranks #1275 out of 1278 companies in the Industrial Products industry, placing it in the top 99.8%.
Is Chiu Ting Machinery Co's PEG Ratio too high?
Chiu Ting Machinery Co's current PEG Ratio of 377.38 is 53811% above median its 10-year median of 0.70. Over the past 10 years, this metric has ranged from a low of 0.10 to a high of 383.35. The Industrial Products industry median PEG Ratio is 1.80. Chiu Ting Machinery Co's value of 377.38 is 20865.6% above this industry median. Based on the distribution chart, Chiu Ting Machinery Co ranks #1275 out of 1278 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Chiu Ting Machinery Co has a GF Score™ of 72/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Chiu Ting Machinery Co's PEG Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Chiu Ting Machinery Co ranks #1275 out of 1278 companies for PEG Ratio. This places Chiu Ting Machinery Co in the lower half of its industry. The industry median PEG Ratio is 1.80. Chiu Ting Machinery Co's value of 377.38 is 20865.6% above this benchmark. Historically, Chiu Ting Machinery Co's own PEG Ratio has ranged from 0.10 to 383.35 over the past decade. While the company's 10-year median is 0.70 vs. the industry median of 1.80, Chiu Ting Machinery Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.80, based on 1,278 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Chiu Ting Machinery Co's current PEG Ratio of 377.38 is 20865.6% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Chiu Ting Machinery Co and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.80 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Chiu Ting Machinery Co's current PEG Ratio is 377.38, which is 53811% above median its own 10-year median of 0.70. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Chiu Ting Machinery Co stock overvalued right now?
Based on GuruFocus' analysis, Chiu Ting Machinery Co (TPE:1539) is currently considered Fairly Valued. The stock's GF Value™ is NT$17.35, compared to a current price of NT$15.85 — trading 8.6% below its estimated fair value. The current PEG Ratio is 377.38, which is 53811% above median its 10-year median of 0.70 and 20865.6% above the Industrial Products industry median of 1.80. Chiu Ting Machinery Co's overall GF Score™ is 72/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Chiu Ting Machinery Co (TPE:1539), the current PEG Ratio is 377.38 as of Jul. 10, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Chiu Ting Machinery Co (TPE:1539) Overvalued in 2026?
Based on GuruFocus' analysis, Chiu Ting Machinery Co stock appears to be undervalued.
The current stock price of NT$15.85 is trading 8.6% below its estimated GF Value™ of NT$17.35.
GuruFocus considers Chiu Ting Machinery Co to be Fairly Valued.
Key valuation signals for TPE:1539:
PEG Ratio: 377.38 (53811% above median its 10-year median of 0.70)
GF Value™: NT$17.35 vs. price of NT$15.85 (8.6% below fair value)
Industry Position: 20865.6% above the Industrial Products median (#1275 of 1278)
No single metric tells the full story. See the TPE:1539 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Chiu Ting Machinery Co Ltd engages in the manufacture and sales of planers, jointers, table saws, shapers, wood lathes, woodworking machinery parts, and power tools. The products offered by the company include benchtop table saws, parallelogram jointer series, and minimized snipe planar series. Geographically, the company operates and generates key revenue from Taiwan.
72GF Score
Get the complete analysis for TPE:1539
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:1539 has been successfully added to your 
