Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Daxin Materials CoTPE:5234 +3.16%83 PEG Ratio is 15.99 as of Jul. 15, 2026, which is 980% above its 10-year median of 1.48. GuruFocus rates TPE:5234 with a GF Score™ of 83/100 and a GF Value™ of NT$194.53 (Significantly Overvalued). Among 611 Chemicals companies, Daxin Materials Co ranks worse than 90.18% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Daxin Materials Co's PEG Ratio or its related term are showing as below:
TPE:5234'
s PEG Ratio Range Over the Past 10 Years
Min: 0.49 Med: 1.48 Max: 77
Current: 15.98
During the past 13 years, Daxin Materials Co's highest PEG Ratio was 77.00. The lowest was 0.49. And the median was 1.48.
TPE:5234's PEG Ratio is ranked worse than 90.18% of 611
companies
in the Chemicals industry
Industry Median: 2.11
vs TPE:5234: 15.98
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Daxin Materials Co (TPE:5234) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Daxin Materials Co PEG Ratio Related Terms
Daxin Materials Co PEG Ratio Historical Data
* Premium members only.
The historical data trend for Daxin Materials Co's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Chemicals subindustry, Daxin Materials Co's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Daxin Materials Co PEG Ratio vs Chemicals Industry
For the Chemicals industry and Basic Materials sector, Daxin Materials Co's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Daxin Materials Co's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Daxin Materials Co (TPE:5234) has a PEG Ratio of 15.99 as of Jul. 15, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Daxin Materials Co and its competitors. This is 980% above median its historical median of 1.48. Over the past decade, Daxin Materials Co's PEG Ratio has ranged from 0.49 to 77.00. According to the industry distribution chart, Daxin Materials Co ranks #551 out of 611 companies in the Chemicals industry, placing it in the top 90.2%.
Is Daxin Materials Co's PEG Ratio too high?
Daxin Materials Co's current PEG Ratio of 15.99 is 980% above median its 10-year median of 1.48. Over the past 10 years, this metric has ranged from a low of 0.49 to a high of 77.00. The Chemicals industry median PEG Ratio is 2.11. Daxin Materials Co's value of 15.99 is 657.8% above this industry median. Based on the distribution chart, Daxin Materials Co ranks #551 out of 611 companies in the Chemicals industry, which is in the bottom quartile relative to peers. Overall, Daxin Materials Co has a GF Score™ of 83/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Daxin Materials Co's PEG Ratio compare to LIN and SHW?
According to the Chemicals industry distribution chart, Daxin Materials Co ranks #551 out of 611 companies for PEG Ratio. This places Daxin Materials Co in the lower half of its industry. The industry median PEG Ratio is 2.11. Daxin Materials Co's value of 15.99 is 657.8% above this benchmark. Historically, Daxin Materials Co's own PEG Ratio has ranged from 0.49 to 77.00 over the past decade. While the company's 10-year median is 1.48 vs. the industry median of 2.11, Daxin Materials Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Chemicals company?
The median PEG Ratio among Chemicals companies is 2.11, based on 611 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Daxin Materials Co's current PEG Ratio of 15.99 is 657.8% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Daxin Materials Co and its competitors. For the Chemicals industry, the median PEG Ratio is 2.11 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Daxin Materials Co's current PEG Ratio is 15.99, which is 980% above median its own 10-year median of 1.48. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Daxin Materials Co stock overvalued right now?
Based on GuruFocus' analysis, Daxin Materials Co (TPE:5234) is currently considered Significantly Overvalued. The stock's GF Value™ is NT$194.53, compared to a current price of NT$376.00 — trading 93.3% above its estimated fair value. The current PEG Ratio is 15.99, which is 980% above median its 10-year median of 1.48 and 657.8% above the Chemicals industry median of 2.11. Daxin Materials Co's overall GF Score™ is 83/100. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Daxin Materials Co (TPE:5234), the current PEG Ratio is 15.99 as of Jul. 15, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Daxin Materials Co (TPE:5234) Overvalued in 2026?
Based on GuruFocus' analysis, Daxin Materials Co stock appears to be overvalued.
The current stock price of NT$376.00 is trading 93.3% above its estimated GF Value™ of NT$194.53.
GuruFocus considers Daxin Materials Co to be Significantly Overvalued.
Key valuation signals for TPE:5234:
PEG Ratio: 15.99 (980% above median its 10-year median of 1.48)
GF Value™: NT$194.53 vs. price of NT$376.00 (93.3% above fair value)
Industry Position: 657.8% above the Chemicals median (#551 of 611)
No single metric tells the full story. See the TPE:5234 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Daxin Materials Co Ltd is engaged in the research, design, manufacture, and sale of semiconductors and display-related fine chemicals. Its product portfolio consists of Semiconductor Materials which includes Laser Release Layer, Photosensitive Dielectric/Pass, High-Purity Specialty Chemical, and High-Purity Specialty Chemical; Display Materials include LCD materials, and touch panels materials; Key Raw Materials include functional monomer, and Specialty Polymer; and Instrument analysis includes analytical equipment. Geographically, it operates in Taiwan, China, and others, with Taiwan generating the majority of the revenue.
83GF Score
Get the complete analysis for TPE:5234
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:5234 has been successfully added to your 
