Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Nippon Yakin kogyo Co's PEG Ratio or its related term are showing as below:
TSE:5480'
s PEG Ratio Range Over the Past 10 Years
Min: 0.08 Med: 0.15 Max: 0.54
Current: 0.54
During the past 13 years, Nippon Yakin kogyo Co's highest PEG Ratio was 0.54. The lowest was 0.08. And the median was 0.15.
TSE:5480's PEG Ratio is ranked better than 79% of 200
companies
in the Steel industry
Industry Median: 1.465
vs TSE:5480: 0.54
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Nippon Yakin kogyo Co (TSE:5480) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Steel subindustry, Nippon Yakin kogyo Co's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Nippon Yakin kogyo Co PEG Ratio vs Steel Industry
For the Steel industry and Basic Materials sector, Nippon Yakin kogyo Co's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Nippon Yakin kogyo Co's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Nippon Yakin kogyo Co (TSE:5480) has a PEG Ratio of 0.54 as of Jul. 19, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Nippon Yakin kogyo Co and its competitors. This is 260% above median its historical median of 0.15. Over the past decade, Nippon Yakin kogyo Co's PEG Ratio has ranged from 0.08 to 0.54. According to the industry distribution chart, Nippon Yakin kogyo Co ranks #42 out of 200 companies in the Steel industry, placing it in the top 21%.
Is Nippon Yakin kogyo Co's PEG Ratio too high?
Nippon Yakin kogyo Co's current PEG Ratio of 0.54 is 260% above median its 10-year median of 0.15. Over the past 10 years, this metric has ranged from a low of 0.08 to a high of 0.54. The Steel industry median PEG Ratio is 1.47. Nippon Yakin kogyo Co's value of 0.54 is 63.1% below this industry median. Based on the distribution chart, Nippon Yakin kogyo Co ranks #42 out of 200 companies in the Steel industry, which is in the top quartile — a strong position relative to peers. Overall, Nippon Yakin kogyo Co has a GF Score™ of 78/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Nippon Yakin kogyo Co's PEG Ratio compare to NUE and STLD?
According to the Steel industry distribution chart, Nippon Yakin kogyo Co ranks #42 out of 200 companies for PEG Ratio. This places Nippon Yakin kogyo Co in the top 21% of its industry — outperforming the majority of peers. The industry median PEG Ratio is 1.47. Nippon Yakin kogyo Co's value of 0.54 is 63.1% below this benchmark. Historically, Nippon Yakin kogyo Co's own PEG Ratio has ranged from 0.08 to 0.54 over the past decade. While the company's 10-year median is 0.15 vs. the industry median of 1.47, Nippon Yakin kogyo Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Steel company?
The median PEG Ratio among Steel companies is 1.47, based on 200 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Nippon Yakin kogyo Co's current PEG Ratio of 0.54 is 63.1% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Nippon Yakin kogyo Co and its competitors. For the Steel industry, the median PEG Ratio is 1.47 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Nippon Yakin kogyo Co's current PEG Ratio is 0.54, which is 260% above median its own 10-year median of 0.15. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Nippon Yakin kogyo Co stock overvalued right now?
Based on GuruFocus' analysis, Nippon Yakin kogyo Co (TSE:5480) is currently considered Modestly Overvalued. The stock's GF Value™ is 円3,990.38, compared to a current price of 円4,930.00 — trading 23.5% above its estimated fair value. The current PEG Ratio is 0.54, which is 260% above median its 10-year median of 0.15 and 63.1% below the Steel industry median of 1.47. Nippon Yakin kogyo Co's overall GF Score™ is 78/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Nippon Yakin kogyo Co (TSE:5480), the current PEG Ratio is 0.54 as of Jul. 19, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Nippon Yakin kogyo Co (TSE:5480) Overvalued in 2026?
Based on GuruFocus' analysis, Nippon Yakin kogyo Co stock appears to be overvalued.
The current stock price of 円4,930.00 is trading 23.5% above its estimated GF Value™ of 円3,990.38.
GuruFocus considers Nippon Yakin kogyo Co to be Modestly Overvalued.
Key valuation signals for TSE:5480:
PEG Ratio: 0.54 (260% above median its 10-year median of 0.15)
GF Value™: 円3,990.38 vs. price of 円4,930.00 (23.5% above fair value)
Industry Position: 63.1% below the Steel median (#42 of 200)
No single metric tells the full story. See the TSE:5480 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Nippon Yakin kogyo Co Ltd engages in the manufacture and sale of stainless steel, specialty steel, and processed stainless steel products. Its products include stainless and heat-resistant steel plates, soft magnetic alloys, non-magnetic alloys, strips, bars, pipes, and forgings; ferro nickel and high nickel steel alloy; NAS coat for roofs, checker plate, angle, flat bar, and processed stainless steel products.
78GF Score
Get the complete analysis for TSE:5480
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:5480 has been successfully added to your 
