Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Union Tool CoTSE:6278 -8.63%79 PEG Ratio is 4.03 as of Jul. 19, 2026, which is 132% above its 10-year median of 1.74. GuruFocus rates TSE:6278 with a GF Score™ of 79/100 and a GF Value™ of 円7,748.96 (Significantly Overvalued). Among 1,277 Industrial Products companies, Union Tool Co ranks worse than 75.25% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Union Tool Co's PEG Ratio or its related term are showing as below:
TSE:6278'
s PEG Ratio Range Over the Past 10 Years
Min: 0.65 Med: 1.74 Max: 16.64
Current: 4.03
During the past 13 years, Union Tool Co's highest PEG Ratio was 16.64. The lowest was 0.65. And the median was 1.74.
TSE:6278's PEG Ratio is ranked worse than 75.25% of 1277
companies
in the Industrial Products industry
Industry Median: 1.76
vs TSE:6278: 4.03
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Union Tool Co (TSE:6278) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Union Tool Co PEG Ratio Related Terms
Union Tool Co PEG Ratio Historical Data
* Premium members only.
The historical data trend for Union Tool Co's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Tools & Accessories subindustry, Union Tool Co's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Union Tool Co PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Union Tool Co's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Union Tool Co's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Union Tool Co (TSE:6278) has a PEG Ratio of 4.03 as of Jul. 19, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Union Tool Co and its competitors. This is 132% above median its historical median of 1.74. Over the past decade, Union Tool Co's PEG Ratio has ranged from 0.65 to 16.64. According to the industry distribution chart, Union Tool Co ranks #961 out of 1277 companies in the Industrial Products industry, placing it in the top 75.3%.
Is Union Tool Co's PEG Ratio too high?
Union Tool Co's current PEG Ratio of 4.03 is 132% above median its 10-year median of 1.74. Over the past 10 years, this metric has ranged from a low of 0.65 to a high of 16.64. The Industrial Products industry median PEG Ratio is 1.76. Union Tool Co's value of 4.03 is 129% above this industry median. Based on the distribution chart, Union Tool Co ranks #961 out of 1277 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Union Tool Co has a GF Score™ of 79/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Union Tool Co's PEG Ratio compare to SNA and RBC?
According to the Industrial Products industry distribution chart, Union Tool Co ranks #961 out of 1277 companies for PEG Ratio. This places Union Tool Co in the lower half of its industry. The industry median PEG Ratio is 1.76. Union Tool Co's value of 4.03 is 129% above this benchmark. Historically, Union Tool Co's own PEG Ratio has ranged from 0.65 to 16.64 over the past decade. While the company's 10-year median is 1.74 vs. the industry median of 1.76, Union Tool Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.76, based on 1,277 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Union Tool Co's current PEG Ratio of 4.03 is 129% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Union Tool Co and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.76 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Union Tool Co's current PEG Ratio is 4.03, which is 132% above median its own 10-year median of 1.74. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Union Tool Co stock overvalued right now?
Based on GuruFocus' analysis, Union Tool Co (TSE:6278) is currently considered Significantly Overvalued. The stock's GF Value™ is 円7,748.96, compared to a current price of 円17,250.00 — trading 122.6% above its estimated fair value. The current PEG Ratio is 4.03, which is 132% above median its 10-year median of 1.74 and 129% above the Industrial Products industry median of 1.76. Union Tool Co's overall GF Score™ is 79/100. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Union Tool Co (TSE:6278), the current PEG Ratio is 4.03 as of Jul. 19, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Union Tool Co (TSE:6278) Overvalued in 2026?
Based on GuruFocus' analysis, Union Tool Co stock appears to be overvalued.
The current stock price of 円17,250.00 is trading 122.6% above its estimated GF Value™ of 円7,748.96.
GuruFocus considers Union Tool Co to be Significantly Overvalued.
Key valuation signals for TSE:6278:
PEG Ratio: 4.03 (132% above median its 10-year median of 1.74)
GF Value™: 円7,748.96 vs. price of 円17,250.00 (122.6% above fair value)
Industry Position: 129% above the Industrial Products median (#961 of 1277)
No single metric tells the full story. See the TSE:6278 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Union Tool Co is a designer and manufacturer of industrial cutting tools to a broad sector of the global industry. The company's key product includes carbide drill used in the manufacture of Printed Circuit Boards, found in all modern electronics. It also manufactures precision machinery including linear motion guides, diesinking end-mills, and digital measuring equipment for industrial use. The company has operations in Japan, Asia, North America and Europe.
79GF Score
Get the complete analysis for TSE:6278
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:6278 has been successfully added to your 
