Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
ADTEC PLASMA TECHNOLOGY CoTSE:6668 +8.16%80 PEG Ratio is 0.93 as of Jul. 14, 2026, which is 27% above its 10-year median of 0.73. GuruFocus rates TSE:6668 with a GF Score™ of 80/100 and a GF Value™ of 円1,484.16 (Significantly Overvalued). The stock has 4 warning signs investors should review. Among 1,276 Industrial Products companies, ADTEC PLASMA TECHNOLOGY Co ranks better than 75.24% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for ADTEC PLASMA TECHNOLOGY Co's PEG Ratio or its related term are showing as below:
TSE:6668'
s PEG Ratio Range Over the Past 10 Years
Min: 0.25 Med: 0.73 Max: 2.72
Current: 0.93
During the past 13 years, ADTEC PLASMA TECHNOLOGY Co's highest PEG Ratio was 2.72. The lowest was 0.25. And the median was 0.73.
TSE:6668's PEG Ratio is ranked better than 75.24% of 1276
companies
in the Industrial Products industry
Industry Median: 1.79
vs TSE:6668: 0.93
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
ADTEC PLASMA TECHNOLOGY Co (TSE:6668) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
ADTEC PLASMA TECHNOLOGY Co PEG Ratio Related Terms
ADTEC PLASMA TECHNOLOGY Co PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Electrical Equipment & Parts subindustry, ADTEC PLASMA TECHNOLOGY Co's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
ADTEC PLASMA TECHNOLOGY Co PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, ADTEC PLASMA TECHNOLOGY Co's PEG Ratio distribution charts can be found below:
* The bar in red indicates where ADTEC PLASMA TECHNOLOGY Co's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
ADTEC PLASMA TECHNOLOGY Co (TSE:6668) has a PEG Ratio of 0.93 as of Jul. 14, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on ADTEC PLASMA TECHNOLOGY Co and its competitors. This is 27% above median its historical median of 0.73. Over the past decade, ADTEC PLASMA TECHNOLOGY Co's PEG Ratio has ranged from 0.25 to 2.72. According to the industry distribution chart, ADTEC PLASMA TECHNOLOGY Co ranks #316 out of 1276 companies in the Industrial Products industry, placing it in the top 24.8%.
Is ADTEC PLASMA TECHNOLOGY Co's PEG Ratio too high?
ADTEC PLASMA TECHNOLOGY Co's current PEG Ratio of 0.93 is 27% above median its 10-year median of 0.73. Over the past 10 years, this metric has ranged from a low of 0.25 to a high of 2.72. The Industrial Products industry median PEG Ratio is 1.79. ADTEC PLASMA TECHNOLOGY Co's value of 0.93 is 48% below this industry median. Based on the distribution chart, ADTEC PLASMA TECHNOLOGY Co ranks #316 out of 1276 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, ADTEC PLASMA TECHNOLOGY Co has a GF Score™ of 80/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does ADTEC PLASMA TECHNOLOGY Co's PEG Ratio compare to VRT and BE?
According to the Industrial Products industry distribution chart, ADTEC PLASMA TECHNOLOGY Co ranks #316 out of 1276 companies for PEG Ratio. This places ADTEC PLASMA TECHNOLOGY Co in the top 25% of its industry — outperforming the majority of peers. The industry median PEG Ratio is 1.79. ADTEC PLASMA TECHNOLOGY Co's value of 0.93 is 48% below this benchmark. Historically, ADTEC PLASMA TECHNOLOGY Co's own PEG Ratio has ranged from 0.25 to 2.72 over the past decade. While the company's 10-year median is 0.73 vs. the industry median of 1.79, ADTEC PLASMA TECHNOLOGY Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.79, based on 1,276 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. ADTEC PLASMA TECHNOLOGY Co's current PEG Ratio of 0.93 is 48% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on ADTEC PLASMA TECHNOLOGY Co and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.79 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. ADTEC PLASMA TECHNOLOGY Co's current PEG Ratio is 0.93, which is 27% above median its own 10-year median of 0.73. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is ADTEC PLASMA TECHNOLOGY Co stock overvalued right now?
Based on GuruFocus' analysis, ADTEC PLASMA TECHNOLOGY Co (TSE:6668) is currently considered Significantly Overvalued. The stock's GF Value™ is 円1,484.16, compared to a current price of 円3,845.00 — trading 159.1% above its estimated fair value. The current PEG Ratio is 0.93, which is 27% above median its 10-year median of 0.73 and 48% below the Industrial Products industry median of 1.79. ADTEC PLASMA TECHNOLOGY Co's overall GF Score™ is 80/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For ADTEC PLASMA TECHNOLOGY Co (TSE:6668), the current PEG Ratio is 0.93 as of Jul. 14, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is ADTEC PLASMA TECHNOLOGY Co (TSE:6668) Overvalued in 2026?
Based on GuruFocus' analysis, ADTEC PLASMA TECHNOLOGY Co stock appears to be overvalued.
The current stock price of 円3,845.00 is trading 159.1% above its estimated GF Value™ of 円1,484.16.
GuruFocus considers ADTEC PLASMA TECHNOLOGY Co to be Significantly Overvalued.
Key valuation signals for TSE:6668:
PEG Ratio: 0.93 (27% above median its 10-year median of 0.73)
GF Value™: 円1,484.16 vs. price of 円3,845.00 (159.1% above fair value)
Industry Position: 48% below the Industrial Products median (#316 of 1276)
No single metric tells the full story. See the TSE:6668 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
ADTEC PLASMA TECHNOLOGY Co Ltd is a Japan-based company. It is mainly engaged in the design, manufacture, and sale of radio frequency (RF) plasma generators. Products offered by the company include visual matching unit, visual matching unit, digital RF power tracer, and chamber analyzer.
80GF Score
Get the complete analysis for TSE:6668
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:6668 has been successfully added to your 
