Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Japan Electronic Materials's PEG Ratio or its related term are showing as below:
TSE:6855'
s PEG Ratio Range Over the Past 10 Years
Min: 0.11 Med: 1.31 Max: 11.37
Current: 2.32
During the past 13 years, Japan Electronic Materials's highest PEG Ratio was 11.37. The lowest was 0.11. And the median was 1.31.
TSE:6855's PEG Ratio is ranked better than 60% of 325
companies
in the Semiconductors industry
Industry Median: 3.4
vs TSE:6855: 2.32
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Japan Electronic Materials (TSE:6855) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Japan Electronic Materials PEG Ratio Related Terms
Japan Electronic Materials PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TSE:6855 vs AMAT, LRCX, KLAC: PEG Ratio Comparison
For the Semiconductor Equipment & Materials subindustry, Japan Electronic Materials's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Japan Electronic Materials PEG Ratio vs Semiconductors Industry
For the Semiconductors industry and Technology sector, Japan Electronic Materials's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Japan Electronic Materials's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Japan Electronic Materials (TSE:6855) has a PEG Ratio of 2.32 as of Jul. 14, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Japan Electronic Materials and its competitors. This is 77% above median its historical median of 1.31. Over the past decade, Japan Electronic Materials' PEG Ratio has ranged from 0.11 to 11.37. According to the industry distribution chart, Japan Electronic Materials ranks #130 out of 325 companies in the Semiconductors industry, placing it in the top 40%.
Is Japan Electronic Materials' PEG Ratio too high?
Japan Electronic Materials' current PEG Ratio of 2.32 is 77% above median its 10-year median of 1.31. Over the past 10 years, this metric has ranged from a low of 0.11 to a high of 11.37. The Semiconductors industry median PEG Ratio is 3.40. Japan Electronic Materials' value of 2.32 is 31.8% below this industry median. Based on the distribution chart, Japan Electronic Materials ranks #130 out of 325 companies in the Semiconductors industry, which is above the industry midpoint. Overall, Japan Electronic Materials has a GF Score™ of 78/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Japan Electronic Materials' PEG Ratio compare to AMAT and LRCX?
According to the Semiconductors industry distribution chart, Japan Electronic Materials ranks #130 out of 325 companies for PEG Ratio. This puts Japan Electronic Materials in the upper half of its industry. The industry median PEG Ratio is 3.40. Japan Electronic Materials' value of 2.32 is 31.8% below this benchmark. Historically, Japan Electronic Materials' own PEG Ratio has ranged from 0.11 to 11.37 over the past decade. While the company's 10-year median is 1.31 vs. the industry median of 3.40, Japan Electronic Materials has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Semiconductors company?
The median PEG Ratio among Semiconductors companies is 3.40, based on 325 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Japan Electronic Materials's current PEG Ratio of 2.32 is 31.8% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Japan Electronic Materials and its competitors. For the Semiconductors industry, the median PEG Ratio is 3.40 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Japan Electronic Materials's current PEG Ratio is 2.32, which is 77% above median its own 10-year median of 1.31. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Japan Electronic Materials stock overvalued right now?
Based on GuruFocus' analysis, Japan Electronic Materials (TSE:6855) is currently considered Significantly Overvalued. The stock's GF Value™ is 円3,404.82, compared to a current price of 円7,080.00 — trading 107.9% above its estimated fair value. The current PEG Ratio is 2.32, which is 77% above median its 10-year median of 1.31 and 31.8% below the Semiconductors industry median of 3.40. Japan Electronic Materials' overall GF Score™ is 78/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Japan Electronic Materials (TSE:6855), the current PEG Ratio is 2.32 as of Jul. 14, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Japan Electronic Materials (TSE:6855) Overvalued in 2026?
Based on GuruFocus' analysis, Japan Electronic Materials stock appears to be overvalued.
The current stock price of 円7,080.00 is trading 107.9% above its estimated GF Value™ of 円3,404.82.
GuruFocus considers Japan Electronic Materials to be Significantly Overvalued.
Key valuation signals for TSE:6855:
PEG Ratio: 2.32 (77% above median its 10-year median of 1.31)
GF Value™: 円3,404.82 vs. price of 円7,080.00 (107.9% above fair value)
Industry Position: 31.8% below the Semiconductors median (#130 of 325)
No single metric tells the full story. See the TSE:6855 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Japan Electronic Materials Corp is engaged in the development, manufacture, and sale of semiconductor testing components and electron tube components in Japan. Its product portfolio comprises heaters and cathodes for receiving tubes and CRTs, filaments for fluorescent display tubes, directly heated cathodes, and probe cards, among others. The group's business segments are Semiconductor inspection parts related business, which derives maximum revenue, and Electron tube parts related business.
78GF Score
Get the complete analysis for TSE:6855
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:6855 has been successfully added to your 
