Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Musashi Seimitsu Industry Co's PEG Ratio or its related term are showing as below:
TSE:7220'
s PEG Ratio Range Over the Past 10 Years
Min: 0.7 Med: 1.59 Max: 7.46
Current: 5.01
During the past 13 years, Musashi Seimitsu Industry Co's highest PEG Ratio was 7.46. The lowest was 0.70. And the median was 1.59.
TSE:7220's PEG Ratio is ranked worse than 83.38% of 668
companies
in the Vehicles & Parts industry
Industry Median: 1.15
vs TSE:7220: 5.01
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Musashi Seimitsu Industry Co (TSE:7220) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Musashi Seimitsu Industry Co PEG Ratio Related Terms
Musashi Seimitsu Industry Co PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Auto Parts subindustry, Musashi Seimitsu Industry Co's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Musashi Seimitsu Industry Co PEG Ratio vs Vehicles & Parts Industry
For the Vehicles & Parts industry and Consumer Cyclical sector, Musashi Seimitsu Industry Co's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Musashi Seimitsu Industry Co's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Musashi Seimitsu Industry Co (TSE:7220) has a PEG Ratio of 5.01 as of Jul. 15, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Musashi Seimitsu Industry Co and its competitors. This is 215% above median its historical median of 1.59. Over the past decade, Musashi Seimitsu Industry Co's PEG Ratio has ranged from 0.70 to 7.46. According to the industry distribution chart, Musashi Seimitsu Industry Co ranks #557 out of 668 companies in the Vehicles & Parts industry, placing it in the top 83.4%.
Is Musashi Seimitsu Industry Co's PEG Ratio too high?
Musashi Seimitsu Industry Co's current PEG Ratio of 5.01 is 215% above median its 10-year median of 1.59. Over the past 10 years, this metric has ranged from a low of 0.70 to a high of 7.46. The Vehicles & Parts industry median PEG Ratio is 1.15. Musashi Seimitsu Industry Co's value of 5.01 is 335.7% above this industry median. Based on the distribution chart, Musashi Seimitsu Industry Co ranks #557 out of 668 companies in the Vehicles & Parts industry, which is in the bottom quartile relative to peers. Overall, Musashi Seimitsu Industry Co has a GF Score™ of 75/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Musashi Seimitsu Industry Co's PEG Ratio compare to ORLY and AZO?
According to the Vehicles & Parts industry distribution chart, Musashi Seimitsu Industry Co ranks #557 out of 668 companies for PEG Ratio. This places Musashi Seimitsu Industry Co in the lower half of its industry. The industry median PEG Ratio is 1.15. Musashi Seimitsu Industry Co's value of 5.01 is 335.7% above this benchmark. Historically, Musashi Seimitsu Industry Co's own PEG Ratio has ranged from 0.70 to 7.46 over the past decade. While the company's 10-year median is 1.59 vs. the industry median of 1.15, Musashi Seimitsu Industry Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Vehicles & Parts company?
The median PEG Ratio among Vehicles & Parts companies is 1.15, based on 668 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Musashi Seimitsu Industry Co's current PEG Ratio of 5.01 is 335.7% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Musashi Seimitsu Industry Co and its competitors. For the Vehicles & Parts industry, the median PEG Ratio is 1.15 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Musashi Seimitsu Industry Co's current PEG Ratio is 5.01, which is 215% above median its own 10-year median of 1.59. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Musashi Seimitsu Industry Co stock overvalued right now?
Based on GuruFocus' analysis, Musashi Seimitsu Industry Co (TSE:7220) is currently considered Significantly Overvalued. The stock's GF Value™ is 円2,084.56, compared to a current price of 円3,470.00 — trading 66.5% above its estimated fair value. The current PEG Ratio is 5.01, which is 215% above median its 10-year median of 1.59 and 335.7% above the Vehicles & Parts industry median of 1.15. Musashi Seimitsu Industry Co's overall GF Score™ is 75/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Musashi Seimitsu Industry Co (TSE:7220), the current PEG Ratio is 5.01 as of Jul. 15, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Musashi Seimitsu Industry Co (TSE:7220) Overvalued in 2026?
Based on GuruFocus' analysis, Musashi Seimitsu Industry Co stock appears to be overvalued.
The current stock price of 円3,470.00 is trading 66.5% above its estimated GF Value™ of 円2,084.56.
GuruFocus considers Musashi Seimitsu Industry Co to be Significantly Overvalued.
Key valuation signals for TSE:7220:
PEG Ratio: 5.01 (215% above median its 10-year median of 1.59)
GF Value™: 円2,084.56 vs. price of 円3,470.00 (66.5% above fair value)
Industry Position: 335.7% above the Vehicles & Parts median (#557 of 668)
No single metric tells the full story. See the TSE:7220 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Musashi Seimitsu Industry Co Ltd is a Japanese transportation equipment manufacturer. The company engages in the business of manufacturing automobile parts for its customers which include the automobile firms in the world. Its product portfolio includes suspension arms assemblies, suspension ball joints, steering ball joints, camshafts, gear assemblies, bevel gears, helical gears, sprockets, gear shafts, and con rods. It serves internationally and mainly focuses on Japan, North America, Europe, Asia, and South America.
75GF Score
Get the complete analysis for TSE:7220
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:7220 has been successfully added to your 
