Phoenix Mecano AGXSWX:PMN -2.33%74 PEG Ratio is 2.09 as of Jun. 29, 2026, which is 11% below its 10-year median of 2.36. GuruFocus rates XSWX:PMN with a GF Score™ of 74/100 and a GF Value™ of CHF439.04 (Fairly Valued). The stock has 2 warning signs investors should review. Among 1,284 Industrial Products companies, Phoenix Mecano AG ranks worse than 54.75% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Phoenix Mecano AG's PEG Ratio or its related term are showing as below:
XSWX:PMN'
s PEG Ratio Range Over the Past 10 Years
Min: 0.87 Med: 2.36 Max: 40.82
Current: 2.09
During the past 13 years, Phoenix Mecano AG's highest PEG Ratio was 40.82. The lowest was 0.87. And the median was 2.36.
XSWX:PMN's PEG Ratio is ranked worse than 54.75% of 1284
companies
in the Industrial Products industry
Industry Median: 1.86
vs XSWX:PMN: 2.09
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Phoenix Mecano AG (XSWX:PMN) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Phoenix Mecano AG PEG Ratio Related Terms
Phoenix Mecano AG PEG Ratio Historical Data
* Premium members only.
The historical data trend for Phoenix Mecano AG's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, Phoenix Mecano AG's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Phoenix Mecano AG PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Phoenix Mecano AG's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Phoenix Mecano AG's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Phoenix Mecano AG (XSWX:PMN) has a PEG Ratio of 2.09 as of Jun. 29, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Phoenix Mecano AG and its competitors. This is 11% below median its historical median of 2.36. Over the past decade, Phoenix Mecano AG's PEG Ratio has ranged from 0.87 to 40.82. According to the industry distribution chart, Phoenix Mecano AG ranks #703 out of 1284 companies in the Industrial Products industry, placing it in the top 54.8%.
Is Phoenix Mecano AG's PEG Ratio too high?
Phoenix Mecano AG's current PEG Ratio of 2.09 is 11% below median its 10-year median of 2.36. Over the past 10 years, this metric has ranged from a low of 0.87 to a high of 40.82. The Industrial Products industry median PEG Ratio is 1.86. Phoenix Mecano AG's value of 2.09 is 12.4% above this industry median. Based on the distribution chart, Phoenix Mecano AG ranks #703 out of 1284 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Phoenix Mecano AG has a GF Score™ of 74/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Phoenix Mecano AG's PEG Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Phoenix Mecano AG ranks #703 out of 1284 companies for PEG Ratio. This places Phoenix Mecano AG in the lower half of its industry. The industry median PEG Ratio is 1.86. Phoenix Mecano AG's value of 2.09 is 12.4% above this benchmark. Historically, Phoenix Mecano AG's own PEG Ratio has ranged from 0.87 to 40.82 over the past decade. While the company's 10-year median is 2.36 vs. the industry median of 1.86, Phoenix Mecano AG has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.86, based on 1,284 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Phoenix Mecano AG's current PEG Ratio of 2.09 is 12.4% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Phoenix Mecano AG and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.86 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Phoenix Mecano AG's current PEG Ratio is 2.09, which is 11% below median its own 10-year median of 2.36. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Phoenix Mecano AG stock overvalued right now?
Based on GuruFocus' analysis, Phoenix Mecano AG (XSWX:PMN) is currently considered Fairly Valued. The stock's GF Value™ is CHF439.04, compared to a current price of CHF420.00 — trading 4.3% below its estimated fair value. The current PEG Ratio is 2.09, which is 11% below median its 10-year median of 2.36 and 12.4% above the Industrial Products industry median of 1.86. Phoenix Mecano AG's overall GF Score™ is 74/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Phoenix Mecano AG (XSWX:PMN), the current PEG Ratio is 2.09 as of Jun. 29, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Phoenix Mecano AG (XSWX:PMN) Overvalued in 2026?
Based on GuruFocus' analysis, Phoenix Mecano AG stock appears to be undervalued.
The current stock price of CHF420.00 is trading 4.3% below its estimated GF Value™ of CHF439.04.
GuruFocus considers Phoenix Mecano AG to be Fairly Valued.
Key valuation signals for XSWX:PMN:
PEG Ratio: 2.09 (11% below median its 10-year median of 2.36)
GF Value™: CHF439.04 vs. price of CHF420.00 (4.3% below fair value)
Industry Position: 12.4% above the Industrial Products median (#703 of 1284)
No single metric tells the full story. See the XSWX:PMN stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Phoenix Mecano AG is a technology company with market shares in international growth markets, manufacturing components and system solutions such as technical enclosures, electronic components, and electrical drives, mechanisms, and control systems for adjustable comfort and healthcare furniture and hospital beds. Its products are used across applications, including mechanical engineering, measurement and control technology, electrical engineering, automotive and railway technology, energy, medical, aerospace, and home and hospital care. The Group operates through three divisions: Enclosure Systems, Industrial Components, and DewertOkin Technology Group. It operates in Switzerland, Germany, the United Kingdom, France, Italy, the Netherlands, and other countries.
74GF Score
Get the complete analysis for XSWX:PMN
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
XSWX:PMN has been successfully added to your 
